i am trying to get into the bios of this portege r100 to reinstall my windows 7 but if i hit f2 or f12 it just highlights a 3 disk, i disk , 2 laptops and looks like a memory board on the page what i i select it goes to a screen that asks me to start windows normally or start a start up repair. the start normally just turns of my laptop and the repair just goes to a screen and nothing happens.
Toshiba sent out a bios update. upon download and install I started getting conflicts. I discovered that this manufacturer update installed 32 bit bios into a 64 bit. Where can I get a download to correct this bio fail?
i downloaded bios update as suggested from toshiba on my satellite l735 and now the computer won' t boot up. All I get is a fan that spins and what sounds like a hard drive spins. There is no screen what so ever. This computer was just bought i August
I have a tosiba laptop L755-5256 with no OS and need to erase hard drive completely first. then I need to flash bios from a 3.5 to 3.6 to set up for a new OS install.
I haven't touched this laptop in a while. I received a virus which then slowed down my computer and made it really really slow to get into the windows log in screen. It wouldn't go past that. Now, 2 months later, I'm trying to install Ubuntu as my only OS. I hope this will get rid of whatever past problem I had. Is this true? The problem with this, is when I power it up and turn it on, the computer only goes to the "Toshiba Leading innovation" H2 BIOS screen. From here, the laptop screen keeps turning black/blank at random intervals (the disk drive kicks up after it turns blank). The screen returns to the BIOS screen... and I keep hitting F12 and nothing.
She set BIOS password and forgot it? Tried pressing 0 and power on, didn't work.It's Toshiba NB500 -00D with Windows 7 Starter. I can't get past the bios password.
I bought this laptop from Best Buy around Nov 2009 and it is still in great shape. However, my pc was infected with spam and I changed the password but lost the paper I wrote it on. I took it to a specialist here in my office and he said that to fix it, he will have to break something and that scared the crap out of me so I told him not to fix it. I am about to start online classes soon and I do not want to buy a new laptop?
On a Toshiba LX835 all-in one, is there a way to set Bios Auto On after power outage? It seems like the BIOS on most computers allow this, however, the option is not obvious in the power management section of the BIOS for this model.
I need to reset the cmos chip, I was wondering if I can remove the ram and hope the settings will reset and so forth.Can I just remove ram and wait 20 minutes or do I have to remove the cmos battery? Computer has no response.
I had updated my bios and I had a hard time waiting until it stops responding. When I try to restart it nothing is possible so I removed the battery and put it again then try to start it and nothing happens.
I've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
I rebooted my labtop everything came back ok but the webcam application that normally is under utilities i went to toshiba website installed their so called application but it's not doing anything, what can i do to get it back.
I have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
My Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
I have a Toshiba Satellite, A305 S6905 with a New Install of Windows 7 Home Premium 64 bit.Bios was updated to latest 2.20 version. I put two new, matched 2 GB ram modules in it. It does not show but 2 GB installed even in the Bios. I checked both modules by putting each one seperately in the primary ram slot and both were showing up as good. I even put the old 2 GB and 1 GB modules I had before under Vista and it still only shows 2 GB installed.It only shows 2 GB installed and 1.87 useable..It boots OK and seems to run fairly smoothly but I have not put it to the test under some memory hog programs yet.
i want to update my bios ( i have asrock motherboard N68-VS3 FX ) and i am a gamer who interested in performance i have bios ver 1.20 can i use the last bios update 1.70 ? or i have to download all the previous updates first what i mean is the update cumulative?
New system build with Gigabyte GA-990FXA-UD3(v1.1), AMD FX8350 4.0Ghz/8coreVertex4SSD, Gigabyte GeForce GTX660 2GB video, 500wPSU, Win7 Home Premium/64.System ran/loaded/updated fine for about 6 hours then crashed during game play.BIOS/Windows unable to recognize SSD, unable to re-install Windows - get as far as "No drives were found. Click Load Driver to provide a mass storage driver for installation"that is followed by:"To install the device driver needed to access your hard drive, insert the installation media containing the driver files, and then click OK"I have burned CD\DVD's and USB flash drive files for a couple of days now looking for the "device driver", but I still hang up at the same screen.I have switched SATA/power cables, reseated memory (crucial Ballistic 2x(2x4)DDR3 PC3-1(16GB total)/video card, installed a WD Caviar Black 1T HDD (not recognized), (re)Flashed the BIOS to F9 from the Gigabyte sight (system had the most current version/flash was successful - no problems with that)but.
As I mentioned how can I update my BIOS version I download the latest BIOS files from the manufacturing site but cant be able to update it.I have HP Compaq dc5850 Small Form Factor PC and My Current version of BIOS is 2.1 and update is 3.3
how do you flash a bios for a motherboard using a usb?? I have an Asus P5KPL-CM and need the lastest bios cause it fixers a problem i have with my audio....
if someone could let me know how to go about this i wound be ever so greatful
NOTE: I have the right bios file.... I have no Floppy drive.
Just thought I would mention this as it is the second machine I have bolloxed now due to doing a bios upgrade.
A while ago I did a bios upgrade on a desktop machine and after doing it got a BSOD and windows would not boot. Had to format and do a fresh install to get over it.
This time round I did a bios upgrade on my laptop so that I could put a T9500 processor into it and got the same problem.
Bit of a pig this one though as I have 3 weeks of non backed up emails I will lose amongst other things.
It seems that if you do a bios upgrade windows 7 see's it as a different machine and just errors out without trying to load. There seems to be nothing you can do to recover from it.
Only option I have it to install another oppperating system on it and then see if I can downgrade bios. See if that will work.
Just be aware of this as not something that will show to often as not to common to have to upgrade bios. Hope this helps someone.
i never flashed bios before and have recently noticed there is an update on the Acer web site. The bios mine is running on at the minute is R01-B3 and the new one is R01-B4.
Is it worth updating to the new one?
Will Win 7 take to it?
What will be the benefits of the newly released bios over the one I have?
How do I go about doing it and are there any safety precautions I could take so I can roll back incase I F it up?
I have two SATA hard drives. I was poking around in the BIOS yesterday and noticed that they were setup IDE instead of AHCI. I am not sure what either does and did not want to change anything without asking. When I first got my PC, it had XP installed, so I am thinking that is why IDE is set. Do I need to change it to AHCI? I am not having any problems. Would it be of any great advantage to change it? I understand that after the OS is installed, it is a problem to switch to AHCI.