Does Windows 7 Run Faster Than Vista
Nov 19, 2011does Windows 7 run faster than Vista?
View 3 Repliesdoes Windows 7 run faster than Vista?
View 3 RepliesI have a question. Why is the installation procedure for Windows 7 much faster when I have my floppy disk drive connected to my motherboard then when I do not have floppy disk drive not connected to my motherboard??? I see when do not have floppy disk drive connected that at the beginning of the installation process, I get to the Windows 7 blue background screen with my mouse curser in the middle of the screen I as now having to wait at least 5 minutes before the Install Windows window appears. The Install Windows window would show up *in less than a couple of seconds* after the default Windows 7 blue background would appear when I have the floppy disk drive connected. Also when I do not have floppy disk drive connected I get the Setup is starting for another 5 minutes later in the Windows 7 install process following by clicking on Install now. Overall the entire Windows 7 install process is much slower when there is no floppy disk drive is connected to the motherboard. Motherboard: Asus P5Q. Questions:
1.Why is this the case?
2.Floppy disk drive technology is rather old technology therefore why would the NEW Windows 7 be searching for this older technology during the install process? Lets face it; most new computers (desktop and aptops) do not have this older technology. Is install process longer with Windows 7 on the newer computers?
3.Is there a means for me to get the same or even faster Windows 7 install process WITHOUT having the floppy drive connected?
these are my specs:
intel dual core 3.00 ghz (e5700)
2 gb of rams ddr2
nvidia geforce 9500 gt 1gb
windows 7 ultimate 32 bit
and iam asking will upgrading to windows 7 64 bit increase the performance of games and make it faster and do i have to install all my games again or it will work fine
Is there any faster way to copy 2 TB Data in Windows (with a USB 2.0 Ported Notebook) other than copy and paste?
Copy and paste would take around:
20 MB/second * 60 1200 MB/minute 1.2 GB/minute
1.2 GB/minute * 60 72 GB/hour
72 GB/hour * 24 1728 GB/day 1.728 TB/day.
Is there any other faster way to do this? or.... As you would see from My System Specs, I have an ASUS G72. Is it possible for me to change one of the USB Pairs from USB 2.0 to USB 3.0?
My laptop takes longer to finish booting (60-70 seconds) than my slower desktop that boots up in about 35-45 seconds.
My laptops CPU is a Core i5 vs my desktop which is an old Pentium 4 HT. I've disabled the same amount of programs to start up on both so I don't know why the laptop is taking longer. how to improve the boot time?
i did a little researching last night to find out how to make my os boot faster, right now its a solid 40 seconds from pressing the on button to usable desktop. my rig is an i7 960, x58 gaming series with 12 gb of ram. followed a few guides on Internet that didn't make much of a difference that included setting the number of cores to 4 and max memory on the msconfig window. this rig came with a 64gb solid state which had the os on it, boot up was about a 1/3 faster and shut down took less than 5 seconds compared to now at about 12. i opted to sell it due to its immensely small size and stuck with the 1tb hdd which i then loaded win7 on myself.
any other tweaks you can recommend to get this rig to boot up quickly and shut down faster? there are tons of apps in the services start up that i really don't know what to do with and dont want to toggle them off, startup only has 5 required things that need to be active when booting up. outside of that, not sure what else i can do or if this is the limits of what win7 + my rigs specs can achieve. 40 second boot up seems slow on my 1tb hdd.
Bringing home this find from Brink's Start Menu restore thread over at Eight Forums:Quote: Originally Posted by Mustang If you want an exact replica of Windows 7 Orb/Start Menu, with ALL the functions, click: Ex7ForW8.It requres slightly more work, as you need the Windows 7 Installation disk to load it; but it only takes a matter of seconds to extract Explorer 7 files.Once loaded it has a toggle switch between Explorer8/Metro and Explorer7/Orb Start Menu.In effect you're running either Explorer 7 or 8. When using Ex7 Metro is totally gone, on boot and after boot; but only a click away if you need to access it from the active GUI.I'm using it on Enterprise 8, and after all available updates still runs seamless.And W8 on SSD SATA3 with I5 CPU absolutely flies. Have tried all of the rest and this is an exact replica of Windows 7 Start, even had all my defaults loaded after installing in 10 seconds using my 7 files off adjoining partition.But it is much faster than either 7 or 8 normally is, due to the 8 Metro features not being loaded into RAM.
View 7 Replies View RelatedI'm looking for advise on what steps I can perform on one of my computers, in order to properly consolidate and move all my ( temp, cache, etc. ) files onto a faster drive I just recently installed.
I recently ran across a couple of 74Gb Western Digital Raptor drives (WD740) in my garage and wanted to integrate one of them into my computer that I use to store my DVD backups on (etc), with the hopes of increasing system performance without having to perform a complete system reinstall.
Also money is a concern; or else I would just get a Solid State Drive.
This computer is running 64bit Win 7 Home Premium I have 8Gb ram installed. The Raptor is formatted and assigned drive letter (Z:).
My system dual boots to either Windows 7 or Vista Ultimate, or, at least it is supposed to. Something happened and now the system just boots to Winodows 7 without giving me the choice to boot to either. When I use F6 I find that only Windows 7 is listed in the Operating Systems box.
View 1 Replies View RelatedNew laptop has Windows 7 Home Premium 64bit. I have two business programs that won't run on a 64bit system. Partitioned the hard drive to install Vista Home Premium 32bit to create a dual boot system solely to run these two programs.Can't get Vista to load. Followed tutorial meticulously. All goes fine until the "Vista will boot for the first time" step. After this first boot, the screen returns to the "completing installation" page. However, the process dies here and the progress bar across the bottom of the screen never moves, even after an hour. Reformatted the partition and started over with same results. Multiple attempts always die after the first boot.
View 9 Replies View RelatedI have two drives (C and D) with Vista on one and Win 7 on the other (not sure if they're actual drives or partitions of a single drive, how do I tell?). I am dual booting and never use Vista. Starting to need the disk space and want to delete Vista. Is this difficult in this scenario?
View 2 Replies View RelatedI had recently installed windows 7 on my laptop running windows vista. I did not remove the existing windows vista installation, and thus win 7 was installed in a dual boot combination. Now, i want to remove vista from my laptop and use windows 7 only.The problem is that during installation, win 7 was installed on logical drive and windows vista was on the primary drive. Thus, i cannot delete/format the windows vista partition. Also I cannot transfer the boot drive to the partition containing win 7 because the vista partition is the active one.
View 6 Replies View RelatedI have Compaq cq-61 with T4400, 3GB Ram, Win 7, 64 bit.When I'm doing Backup via iTunes or doing some other "heavy" actions, the CPU and RAM goes up. There are no infections, malware etc... Just an old com that feels heavy How do I make my come lighter/faster?I'll be happy if someone can explain me about un neccessary background services, maybe disabling some graphic features etc
View 4 Replies View RelatedI've heard the pros and cons as to which is faster, but I'd really like to get the facts as to which one actually is (faster). I have Windows 7 Pro using a 64-bit OS.
View 1 Replies View RelatedAt the time I have two operational systems: Windows XP SP3 x86 and Windows7 Home Premium x86.Because of my computer is pretty old and slow, Most of the time(for gaminf and work) I use WindowsXP, but for movies and music I like to use Windows7.Everything would be just fine, but i really hate restarting my computer, so I can change my OS.Is there any other way to change my OS without restarting my computer, I want to do this faster.
View 3 Replies View RelatedRecently, I've started getting an error which says: "Your USB Composite Device can perform faster if it is plugged into a hi-speed port" "The hubs shown in bold type have free ports that can support the HI-SPEED USB device"
It then lists two bolded options for a hi-speed ports: A USB Root Hub with 6 ports, and another with 4. This error occurs on both my Windows 7 equipped Dell XPS15 (which has 2 USB ports) and an older Dell laptop which runs Vista (3 USB ports)
This is shown after my external drive (a seagate model) disconnects from my computer, which usually ends poorly for me, since I typically run Photoshop off my drive.
I'm wondering if these errors are caused by a new USB splitter I bought. It has 4 ports, but the model year and quality of the thing are dubious at best; my webcam and wireless mouse are also typically attached to it, and the webcam disconnects at the same time as the external drive. The mouse still works though, so that's pretty mysterious.
I recently purchased a 7200 rpm WD SATA drive and would like to migrate my Win 7 drive from a slower 5200 rpm Seagate SATA.Can I do this without reinstalling Windows?f I can migrate from one to the other, will there be any problems with validation?
View 1 Replies View RelatedI just realized that this forum is for Windows 7 and I happen to be using Xp - so flame away if you like. I think the fundamentals still apply.I have DVDs with data files (inspection data) that I need to copy to the network. I can also copy to a USB2 external drive. The issue is speed. I am using xcopy /s. It is taking almost 45 minutes to copy the DVD to my hard drive. I have over a hundred DVDs. If I was getting paid by the hour this would be a great job!I have try making disk images but the speed is about the same - same for internal HD or Eternal HD. I am using a new dell quad 6500. I realize that the cd read speed is going to be a factor - however after getting the files off the DVD to my C: it takes over 30 min to copy from my machine to the USB drive.
View 7 Replies View RelatedAnything that i can do to make my laptop faster? i got a x64 Windows 7 Premium 160 HDD and 4RAM AMD Its pretty slow and need some more performance.
View 9 Replies View RelatedI'm interested in buying a laptop, one of the main uses will be running vmware with potentially server 2008 and/or a couple of Windows 7 workstations. I was wondering if vmware or hyper-v utilize an i7 to its full potential or will I not really notice any difference if I opt for an i5 instead.
View 9 Replies View Relatedhow do i make my hp mini run faster? i have cc cleaner & norton
View 1 Replies View RelatedI'd like to know how to make my computer and internet faster?
View 27 Replies View RelatedI have an Acer Aspire 5542-5462 laptop (◦CPU/Ram: 2.2 GHz / 3838 MB) w/ Windows 7 and the product details indicates I have four 2.0 USB ports (2 on the right side, 2 on the left). Today I connected my 1TB external "SimpleDrive" hard drive in order to do a backup which I'd done previously but my last one was afew months ago and this time got the same "This Device Can Perform Faster - Your USB Mass Storage Device can perform faster if plugged into a hi-speed port" message as others have. This is the first time I've received this message.Below that is a window with the heading "The hubs shown in BOLD type have free ports that can support the HI-SPEED USB device." and in the window it shows 2 separate "Standard Enhanced PCI to USB Host Controller" and under each it shows a sub-heading "USB Root Hub #6 ports# in BOLD TYPE. Under the 1st USB Root Hub it reflects all 6 as being "Unused Port" and under the 2nd USB Root Hub it reflects all but the 5th of 6 as being "Unused Port" and the 5th as "USB Composite Device".I went online to find out about the USB "This Device Can Perform Faster" message and what it meant, along with solutions. I've tried the following:
-Went into the "Device Manager" window and the "Universal Serial Bus controllers" sub-menu which reflects, in order, 2 "Standard Enhanced PCI to USB Host Controller", 4 "Standard OpenHCD USB Host Controller", 2 "USB Composite Device", 1 "USB Mass Storage Device" and finally 6 "USB Root Hub".Per online instructions I right-clicked on each one and used the "Update Driver Software" #via a "Search online for updates" option# and received a "The best driver software for your device is already installed; Windows has determined the driver software for your device is up to date" for each and every one.
-Secondly per online suggestions I checked each USB Root Hub and all reflected as running at "full-speed" instead of the optimum "hi-speed" #which was indicated as to what should be showing if using a true 2.0 USB port#.So basically what I'm asking is if I have the current drivers already installed and my laptop's 4 USB ports are all supposed to support 2.0, then why aren't those USB Root Hubs running at HI-SPEED instead of the slower full-speed? Is there something I've missed? Or is there nothing wrong at all?
I have a legitimate copy of Windows Vista with key codes etc and I have a legitimate upgrade disk for Windows 7. I had Windows 7 installed on a previous system build which had a HD crash and now I am starting again from scratch (wiyh backed up data).
Like a dolt, I installed Wondows 7 before I remembered it was an upgrade edition. I've looked all over the MS site and don't see a method I can use to Activate Windows 7 from this point. way to use my legitimate Windows disks and keys without having to wipe the drive, install Vista and then install Windows 7 yet again.
It's aggravating to have legitimate software and not be able to use it without needing to trick the system - surely there is a way to not have to start all over?
My laptop seems to be really slow. I'm quite sure that my laptop has always been slow, so it's not like it suddenly just got slow. My laptop used to be Vista but was then I updated to Windows 7. To find more details about my laptop click the computer icon next to my username. I would like some suggestions on how I can make it faster as it's starting to annoy me.
P.S I timed my laptop to see how long it would take to turn on then open my browser, it took 5 mins, it may sound short but its not short when you have to wait 5 mins every time you turn it on.
I've recently moved into Windows 7 Service Pack 1.First thing (and foremost, right now) I've noticed is how unstable and slow my Internet Connection is; Windows 7 reports my Wi-Fi router's signal strength as "Average/Good", whereas in XP it's always "Excellent". I can't browse at all, or log into Windows Update to get fixes; the connection drops erratically.What offline tweaking can I do to fix this situation? I use a REALTEK RTL8185 54M Wireless LAN Network Adapter to connect to a D-LINK WBR-1310 Wi-Fi router.
View 6 Replies View RelatedMy HP ProBook 4730s contains switchable graphics. One of which, is an ATI Radeon HD 7470M, and the other is a generic Intel HD Family. Now, I can assure you that when I switch between cards, they switch properly, and are in the correct order. I have checked with many different methods. Now to the actual issue. In low and medium end games, my Intel out preforms my ATI my miles. For example, in Trackmania United Forever, on my ATI, medium settings, 720p, no AA = 20fps. Intel, max settings, 900p (native res), 4x AA = 60fps.However, if I play Mirror's Edge, these results are inverted, thus proving that the ATI is more powerful.
What I can only conclude is that the ATI is attempting to conserve power by limiting it's performance in low end games. Problem is, I have configured it for max performance in every setting I can find. I just don't get it.
My Question is, is it possible to increase the File Transfer Speed on my Computer??
View 9 Replies View RelatedMake my laptop perform faster. Its very Lag.
View 2 Replies View RelatedHow can I make my laptop and the Internet is working with the best performance? How do I get rid of temporary files and unwanted files? Could I make a batch file or any other file which execute automatically weekly or daily.
View 4 Replies View RelatedSo I just purchased a SSD and put Win 7 on it. All is fine and dandy, but I still like to visit my Vista instance on the old hard drive. It appears that the only way to switch between which hard drive & OS to boot to is to go into the BIOS, rearrange the boot sequence, and then reboot. This is rather clumsy and time consuming IMO. Is there a faster way to choose which hard drive to boot from? I've looked into "dual booting" which will prompt the user with a simple menu to choose which OS to boot into. This is exactly what I want. The problem is that it appears this is only available when both OS's are on one hard drive, which is not my situation.
View 3 Replies View Related