there is a better way to change my audio playback device in Windows 7 (Ultimate, Service Pack 1, 64 bit). As background, I keep my headset plugged in at all times and swap to it when needed, but like to use my speakers most of the time.
The only way I've found to swap between headphones and speakers is to right click the volume button on my taskbar, open "Playback devices", select my headset (listed as "Speakers, Realtek High Definition Audio"), then click "Set Default".
Aside from feeling rather tedious, the swap is not recognized in nearly all programs if they're already active. In other words, if I boot up a program with my speakers set to default, swapping to headphones via the above process will not change the audio output device for that program until I quit it completely, set the new default, the restart the program.
i'm wondering if there is a way to automatically change the audio playback device depending what monitor the application making noise is on. for example when i watch a Internet video on either of my 19 inch desktop lcd monitors i want to sound to play through my pc speakers. if i play something on my lcd tv through hdmi i want the sound to play through the hdmi to the tv. ive done alot of searching and i cant find anything anyone have any suggestions?
When I was watching movies on my computer through my HDMI, I accidentally disabled the device so now the sound only comes out of my computer. How can I restore this function?
My comp is having some audio problems. Windows 7 ultimate 32 bit. It says i have no audio playback device installed? One or more audio service isn't running? Both the windows audio and the windows audio end point builder services must be running for audio to work correctly. At least one of these services isn't running? It says I dont have a playback device installed?
No devices displayed when I open playback devices.? How do I get a device or install a driver to fix the problem. In services both windows audio and windows audio endpoint aren't started. When I turn on windows audio i get error 1068: the dependency service or group failed to start. When I turn on windows audio endpoint builder I get error 1084: this service cannot be started in safe mode sound doesn't work no audio at all. I don't have a restore point. I can only boot up in safe mode with networking.
With my current setup I have 2 playback devices that I constantly use on my computer. Currently to switch between devices I have to go to control panel, sound, and then change the playback device. I am hoping to find a way to make 2 shortcuts on my desktop to change my playback devices. One shortcut for each of my devices, where I can open the shortcut and the default device will be changed. I am using Windows 7 Ultimate.
In the Sound options window, you would see your several devices under Playback and Recording Devices. The thing is I have audio devices that have a number next to them, eg. "2- Creative Sound Blaster". Windows always does this, but I would like change these device names, and I don't know how.
I recently updated my NVIDIA card with audio drivers and now it can make the audio go through my television using HDMI (watching videos). The problem however, is that when I go into the Sound settings and change the default to the NVIDIA "device", I need to reboot windows to activate the change. I have tried going into the mixer and the sound setting and I can't figure out a way to change the active audio device without having to reboot (or even just log out and log back in).
I have my computer hooked up to a home theater system. Most of the time, my computer audio output is set to my on-board motherboard audio connected to simple speakers, but I frequently switch the default device to digital output through my sound card (HTO Striker 7.1). My goal is to create a file that I can keep on the desktop that will switch the default audio device. In a perfect world, it would switch back and forth between the 2 settings that I use, but I understand that it might be too much to ask for. I have a bit of experience with batch files in XP, but that was essentially reverse-engineering things that I found online.
from the digital audio device? every time i plug in my $20 speakers i got from target, the audio device changes from my soundmax driver (which comes thru the lappy speakers) to a digital audio device in my little speaker icon thingy and i don't know how to manually change it back except thru reinstalling the drivers and rebooting a bunch of times,when i go to properties it only shows the enabled device and i can't find the other output option. if i reinstall the soundmax drivers it switches back to laptop speakers but this is obviously a hassle.
My lapotop is HP Pavilion 9750 running Windows 7 Enterprise (with the latest updates). When I'm inserting the HDMI cable to view my screen on the TV it automatically shows the video, but I have to manually change the default playback from "Speakers" (Realtek High Definition Audio) to "Realtek Digital Output" (Realtek High Definition Audio) so I could hear the audio from my TV and not from the computer.
Is there a way to make that switch automatically when I connect/disconnect the HDMI cable?
I have been trouble shooting my sound for quite some time with no results. I've deleted and reinstalled drivers, checked bios, etc. no luck.here are my speccy details
I recently desc covered that besides VLC on my laptop all the other video player are not able to work properly (meaning,, Windows Media Player 12, Cyberlink PowerDVD12 and WMPC are able to play only the audio, but not the video, just black screen),, BUT with VLC is no problem playing any video format!! The thing is that I didn't have this problem previously,, all my video players were able to play all the same video files, which they can't now! I have the latest AMD Radeon HD video drivers installed
I have system with multiple Sound playback devices. Most of the time it needs to be on the first entry in the list of devices (HDMI output with me).I'm looking for a way that when I have manually set it to another device in the list, and then shut down the pc that at the next boot it automatically reverts back to the first in the list without manual intervention.
The title is pretty much what i want, some kind of key to press that will change my playback devices from my speakers to my headphones and vice versa? I tried by doing a macro but that didnt work at all so can i just set a key to change it automatically?
I currently have a dual screen setup, the primary a computer monitor and the secondary an HDTV hooked up via HDMI cable. Accordingly I have 2 sound setups; a set of speakers at my desk and the other is the TV's speakers.
The problem is most programs have no option to choose the audio playback device. Everything goes to the default in Windows, so I have to manually change it every time to either the TV or the speakers. I only really use the HDTV to watch videos and want only the sound from that specific program to play on the TV, and everything else on my desk speakers.
I had a workaround to this in Vista. By setting the default audio device to the HDTV Windows would automatically switch the audio output to the speakers when disabling the secondary monitor which could be done easily with UltraMon. Windows 7 audio playback doesn't seem to detect this change so I'm wondering if anyone knows of a solution or workaround.
I'm trying to use my computer as a wake-up alarm. I typically have my USB headset as my default audio device, but I also have speakers plugged in and turned on. When my computer boots up in the morning, I would like to have a script that changes the default audio device to the speakers for a certain amount of time, then changes the audio device back.
I recently desc covered that besides VLC on my laptop all the other video player are not able to work properly (meaning,, Windows Media Player 12, Cyberlink PowerDVD12 and WMPC are able to play only the audio, but not the video, just black screen),, BUT with VLC is no problem playing any video format!! The thing is that I didn't have this problem previously,, all my video players were able to play all the same video files, which they can't now! I have the latest AMD Radeon HD video drivers installed (just after I discovered the problem).
I have previously made this trade in a "Graphic Cards" section,, I guess it was wrong so I am re-posting it here "Music, Pictures & Video"
I installed the latest realtek ac97 drivers and so far my speakers (playback) and mic (recording) works just fine. Unfortunately I cant get the sound to playback through both my speakers and headset at the same time.
It only allows me to set one or the other as my default playback device, is there any way I can have both playback at the same time?
After opening the Sound pane (from right click on the tool bar speaker icon) I clicked on the Set Default button near the bottom. There I clicked Disable (I think that was the term) for the onboard sound card (Conexant). Now the sound card is gone and I can't find how to turn it back on. I'm not very sophisticated but I have checked the usual suspects even downloaded the driver etc.
After opening the Sound pane (from right click on the tool bar speaker icon) I clicked on the Set Default button near the bottom. There I clicked Disable (I think that was the term) for the onboard sound card (I Conexant). Now the sound card is gone and i can't find how to turn it back on. I'm not very sophisticated but I have checked the usual suspects even downoaded the driver (Conextant) etc.
I am experiencing audio playback stuttering. I checked if this is due to processing or ram usage, but nothing was wrong there as audio was playing well under high processing load and high memory usage. But recently, i found that when i browse internet or download something, it starts to lag. I am using winamp 5.63. I came to know that a few other people are experiencing this problem too, but i didnt find any solution.
Windows 7 64bit Prof (on a suped up PC) Asus BT211 - BT 2.1 + EDR (full A2DP support with latest Windows 7 64bit drivers - Broadcom Bluetooth 2.1 +EDR driver version 6.3.5.430 (4/8/10) Sony DR-BT101 Headphones - (Microsoft says they're compatible)
PROBLEM:All BT devices successfully installed and appear to be working. I can even find the A2DP device if I show all hidden devices in Device Manager. The headset pairs with no problems, Remote, Headset, Handsfree Telephony, and Audio Sink Services are available under device properties. However, non of the headphone services are available under "Playback Devices" or "Recording Devices".When I right-click on the Bluetooth system tray icon and select "Open Settings" then click on the "Audio" tab I can see all of the active services from my headset. All services show "disconnected" below them. When I right-click on a service (with the headphones on and in connectible mode - steady flashing blue) I can select "Connect" (the only place in Windows 7 I've found the connect function). When I try to connect, it shows "Connecting" for a minute or two then goes back to "Disconnected". The headset never appears to respond.SO... basically it appears everything should be working, but for some reason it isn't. I can PAIR but I can't CONNECT. I can install services but I can't actually use any of them.
I've tried everything, there must be something I'm missing. Others have said they got these headphones working with Windows 7, many have also had problems not just with these headphones, but a whole range of BT devices and connecting to Windows 7.I also have a Logitech BT MX5000 keyboard and mouse combo and they work fine.... well, when they're not lagging out or dropping out, they work fine.
I discovered that besides VLC player on my laptop all the other video player are not able to work properly (meaning,, Windows Media Player 12, Cyberlink PowerDVD12 and WMPC are able to play only the audio, but not the video, it's just just black screen),, BUT with VLC is no problem playing any video format!! The thing is that I didn't have this problem previously,, all my video players were able to play all the same video files, which they can't now! I have the latest AMD Radeon HD video drivers installed. As I mentioned I didn't have this problem before,, with a previous versions of the AMD graphics card driver. This happened to my laptop a while ago already,, since I have this problem I updated my video drivers 5 or 6 times at least, and no change so far!Why am I assuming that the cause of my problem is the graphics card driver is, for ex. when I had just re- installed my windows (fresh! from Windows 7 to Windows 8),, the video playback was working, while the graphic card was running on the drivers provided by Microsoft! as soon as I am installing the driver for my model of AMD Radeon graphic card I am staring to have the problem.As I mentioned I have the problem for some time already, during this time I re-installed my Windows couple of time, plus I even changed the version of the windows (7to8), for the moment I have the last version of video driver installed, I haven't installed ANY codecs?
What is going wrong after soundtrack or music has been added and the clip saved?requently music playback in the files converted from a number of formats ( obv. to wmv) is dodgy, choppy or simply not capable of being listened to. Obviously I am at fault. What is being done incorrectly> Windows 7 ultimate 32 bit (warranted no emoticons)
If i remove/uninstall 'High Definition Audio Device' Driver in Device Manager will Windows Update find it again?Because im having crackling issues basicly the sound is really choppy and choppy basicly and it makes my ram go to 100%
I turned my computer on to find no audio playing. My main audio device plays bac audio from DAW just fine but if I load a video in WMP i get a code C00D11B1. If I try to play a test tone in the sound settings I get "Failed to play test tone". I have other audio devices connected and also get the same errors which makes me think this is a registry error or some windows communication error. The only thing I think might have caused this is when I was trying to get my ram to run at 1866. This is a new build and the ram should run at this speed as it is in the QVL but that is another issue. I should also mention that I have tried reloading the device drivers, updated the BIOS, and restyored windows from a previous state with no change.
Asus sabertooth 990fx Fx-8120 4x 4gb g skill Sniper Visiontek HD 5770 2 seagate barracudas in RAID 0
My computer's onboard audio recently stopped working. The Realtek High Definition Audio Speakers suddenly show as "Not plugged in" in the Playback devices dialog.oinciding with this, five new devices, all "Speakers," all showing as "Ready" or one of the defaults, have appeared: WsAudio_DeviceS(1) through WsAudio_DeviceS(5).None of these WsAudio_DeviceS produce any audio when tested; I have tried this with both my speakers and some headphones.The Realtek Digital Output still appears as "Ready," which isn't useful, given that I don't have any S/PDIF devicesI have tried connecting some wireless headphones with a Bluetooth dongle I had lying around, but I couldn't get them to work very well (nor could I back when my speakers were working). Recording with a USB microphone works fine, but I haven't tried it through the onboard audio Line In jack
I installed Windows Vista using my computers recovery disk. Everything was working fine until I updated windows. After the last restart (after the updates) I notice that I am getthing this icon on the bottom right:And if I try to open the Volume controls it opens this window:I removed Windows Vista and now Im using Windows 7 (and thats why I came to this forum) in the hopes that it would fix the issue but it didnt. On Device manager I have no Sound devices:
this device is being used by another application. please close any devices that are playing audio to this device and try again. is what it is saying when i try to test , its hdmi ti hdmi from pc to tv i got picture but no audio and cable works fine on frineds pc and tv?
Since installing it, I had a problem with my sound, which was as the title states, no audio output device. I've been through several drivers, none of which worked, and I've also tried sound max, which has in fact worked, however I can't stand the little sound bar when you up or down the volume, and it's fairly unresponsive when I use the buttons on my laptop. So in all fairness, I just want the actual driver designed to work with this laptop.I do have a version of Windows 7 Home Premium, not too sure if it'd make much difference, however I'd rather not go through another OS install as I've got most of my stuff already set up on this now!I am good with computers so don't be afraid to get technical, but I just need another angle on this because it's most likely just something I'm overlooking.
