Workaround For Files That Cannot Be Accessed ("Access Is Denied")
Mar 11, 2012
A few thousand of my pictures could not be accessed anymore after I had to re-install my whole computer after a crash. They all got the error message: "Access is Denied". Also copying and deleting is impossible.With the great free tool UNLOCKER I could still delete them.Then, searching for an explanation, I found forum posts trying to explain that the error message had to do with older Windows versions, different folder systems, links instead of real files. I didnt understand at all, but wanted to follow up the advice 'take ownership an change permissions'. So I went to the Reccle Bin and restored the unaccessible files. Surprise!After restoring their behavior was completely normal.
1. Install UNLOCKER
2. Rightclick on the unaccessible files (group selection possible) and select DELETE.
3. Go to the recycle bin, select the same files, right click and select RESTORE.
Recently got a new computer with Windows 7 and still learning the in and outs of the machine.I was trying to open some files and folders and I get a error message saying file is not accessible and access is denied . I am the adminstator of the computer with no one else having those rights so why would I have this problem . Can I change a setting where I never receive this message at all or do I have to change settings for every file that I come across that I get this message?
Several days ago I managed to synchronize my computer with my Xbox 360 using Windows Media Center. I don't know what happened between now and then, but my computer seems to have locked my administrative controls. Most of my files I had beforehand are denying me the ability to do anything, except open and view the contents.
I have a new windows 7 install on an old Acer Aspire SA-80
when I to run certain EXE's from my external desktop HDD i get "windows can not access the specifed device, path or file, you may not have the approriate permission to access the file" - when i check permisions for my user account they do not have full control, when i set full control it just resets back to read only
I am running windows, installed bitwise chat, I can send and receive text, I can send files ect, but can not receive files just keep getting a pop up saying access denied.
i installed windows 7 pro x64 recently. i'm in the process of copying my own old windows xp files, as well as copying the backed up windows xp files from my friend's installation that were in my old hard drive. i've been battling windows 7 with permissions left and right to copy the remaining files. i'm trying to delete my old windows installation folder. there's a file in sytem32 that's preventing me from deleting. i've established ownership, i've changed it so i have fullprivileges, i've changed it to enable sharing, disable sharing, i have UAC down to medium, still keep getting you need permissions and the try again message, and no matter how many times i click on try again it comes back up.
now this is also happening when trying to copy files from my friend's old installation to my portable hard drive. we're talking about movie files, folders, documents, etc. still keep getting permission requests and no matter how i go about it, it keeps asking again and again and the files never copy. i thought maybe if i renamed the documents and settings folder that i'm grabbing them from, but that made no difference.it is so difficult to enjoy this new windows when at every step there is some assinine feature like this!
I've been attempting to delete files from Norton Internet Security, which has been inactive for a long time (we are not going to renew our account) and has been bugging us constantly. I assumed it would be an easy task, and I couldn't have been farther from the truth.I went into the C:Program Files (x86)Norton Internet Security where the data for the program is found, and I couldn't delete the files. A dialogue saying "You need permission to perform this action You require permission from administrators to make changes to this folder".I thought it weird, since I am one of the computer's administrators. Next, I logged on to my dad's profile (at his insistence, though there shouldn't be any difference in the administrator powers of our profiles). The same result followed.Next, I looked online in a Google search and found this site, which told me to use the command prompt to first give me the ownership of the files, then give me complete permissions to the files, and then delete them. All three of these actions failed. The command prompt said "Access denied".
Access Denied/Can't view files and can't delete them either HELP!I keep getting this message direct search frame created tbo_ie access denied.I get this popup twice and then I can go on after I delete it.This is what popup direct search frame created tbie access denied ; how do I get this to stop.
I have a brand new install of Win 7, after which I tried to install a LINKSYS Wireless USB Adapter (WUSB300N) and during the copy files installation process I get ACCESS IS DENIED.and the process stops. I only have one id defined and it of course has admin authority, so I don't know what is wrong.
I'd like to put a .cmd file in my c:Documents and SettingsAll UsersStart MenuProgramsStartup directory, but Documents and Settings has a lock on it and tells me "Access denied" when I click on it. Is this a job for "Take Ownership" or is there another way? The instructions for "Take Ownership" say not to use it on the C drive, but it's not clear if that applies to the whole drive, or individual files/folders on it.
Upon startup, the desktop icons are accessible, however, upon opening/closing of Internet Explorer, the icons will not even highlight, let alone open. This is both left click (single and double) and right click actions. The right click will not work on the desktop image/wallpaper itself either.
I have 5 Windows 7 computers connected to the same homegroup/workgroup via a Cisco Linksys E1200. All four computers are HPs of various makes, 3 laptops (one of them is a $600 brick) and 2 desktops. Any computer that is awake and online, shows up (with its name) in Network on the other machinesHowever, double-clicking to view files on these computers returns the following message:Code: Windows cannot access \COMPNAMECheck the spelling of the name. Otherwise, there might be a problem with your network. Totry to identify and resolve network problems, click Diagnose.Details: Error code: 0x80070035 - The network path was not found.Diagnose, as expected, did nothing. However, here's the fun bit - when I try to access files on other computers by browsing their IP address, everything works perfectlyFor now, anyway. I'm expecting a sudden degradation any day now.
I have one PC running Vista (home basic), one running XP (professional) and one running Windows 7 (home basic). There is a printer connected to the Vista box, which is shared.
On the XP box I can both see and use the printer on the Vista box (i.e. a "net view \vistabox" shows the printer, and under "printers and faxes" I can install and use it).
On the Windows 7 box, however, I can see the Vista box (i.e. a "net view" shows it in the list of available PCs on the network) but a "net view \vistabox" gives me an "access denied" error.
The Windows 7 machine has a password on it, the Vista and XP machines don't. All machines are on the same workgroup name (which is "WORKGROUP"). On the XP box I don't need a password to access the shared printer on the Vista machine; it just works.
Extensive Googling has failed to render enlightenment, nor has browsing this forum. I'm sure it has something to do with security and passwords, somewhere, somehow, but I have no idea in which direction to look for it, let alone fix it. I have also read some things about workgroups and homegroups not being the same in Windows 7, but I'm not sure if this is correct (and if so, relevant).
Cleaning up the friend of a friend's completely virus infested, badly working computer.
Windows 7x64 HP Pavilion g6 Notebook PC
The Basics:While I was beginning to install and manually offline-update various anti-malware tools so that I could begin to determine what I needed to do to get this thing clean and properly operable, I noticed while looking at Programs and Features that many of the install dates for various software were dated in various months in 2013. My installations were 1 year, 2 days ahead of the current date. Windows Explorer shows this to be consistent throughout the files and folders installed.
Looking at the install dates for some of the HP proprietary software/bloatware, I can tell this behavior started some point after the computer was purchased and used (the bloatware installation date was one day after the warranty start date listed in the BIOS). I am presuming dates on files and folders created, modified, or accessed from the point of the initial occurrence of what caused these particular incorrect future timestamps are the only ones affected.
The clock and date were wrong by the exact amount forward as were the install dates for the files I installed, so, as expected, the files were taking their timestamp from the computer's time. I assume whenever the computer date and time were maladjusted is when the problem started. I fixed the time and date, but the files and folders did not adjust their timestamps, again as expected.
1. Are there any particular problems I am not considering which could be caused by the incorrect dates, other than some particular searching and arrangement issues, which in this case I think would be superficial? This type of date information is just descriptive metadata for files and folders, correct?
2. Is there any way to fix this? I cannot think of any, but maybe there is something I am missing, hashing it out in my mind. If the BIOS clock and the Windows date and time settings were separate and the date metadata were generated based on a timer referencing the BIOS clock, then I could see a way to repair this. But, at least on this notebook, a change in one is reflected in the other--I think this is how Windows OSes operate in general. Anyway, any ideas?
3. Finally, after I finish cleaning and repairing the notebook, is there any way to globally reset all of the date metadata on all files/folders to reflect the present? So long as having incorrect future timestamps does not affect operation, then this is superficial, but it is irrationally driving me crazy. If it were my computer, I could not stand it--barely can stand it as it is. I have found a program that lets you reset all of the dates of all files in a folder, or the dates of all folders visible when opening a directory or subdirectory, but not both simultaneously, and so of course not anything that would change the dates of all the files and folders nested within one another from root.
I haven't really had any issues since I first installed Windows 7 and now I'm trying to access a shared drive over a network and I'm getting this annoying error message that I cannot access a shared drive over the network.
I decided to reinstall Windows 7 and before that I never had this issue.
I have not installed any third party software, I've enabled network discovery and right now I cannot access any shared folders or drives, at all, though it can see it.
I'm getting that stupid error message: "<Network drive> is not accessible. You might not have permission to use this network resource. Contact the administrator of the server to find out if you have access permissions. Access is denied."
problem with self-registration of my dll.The dll fails with an error - "The following files did not self-register or unregister ---- Access is Denied". I am the administrator of the machine.I have turned off the UAC. I have registry rights too.The dll has been developed by us and it is working fine in XP. The installation package has been build using InstallShield_7.01 on a Windows 7 machine.The software has been working fine on Windows XP without any issue for years now but on Windows 7 it is having problem with registration of the dll components.Is it an issue of some protected registry keys of windows 7 on which i might not have permission.If so how to access those registry. On manually registering the dll using the regsvr32, we are able to register the dll and the software works fine.I want to know how can i correct this error without manually using the regsvr32.
more and more I keep getting Access Denied. This is with 403 access denied.Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bitProcessor: AMD Athlon(tm) II X4 630 Processor, AMD64 Family 16 Model 5 Stepping 2Processor Count: 4RAM: 3839 MbGraphics Card: ATI Radeon HD 4200, 256 MbHard Drives: C: Total - 702932 MB, Free - 656088 MB; D: Total - 12368 MB, Free - 1523 MB;Motherboard: FOXCONN, 2AB1 Antivirus: Norton 360, Updated and Enabledu
I have a problem that is far beyond me and Im scared of going too far into this and messing things up.I am trying to delete folders using Mutilate file wiper but I am getting the following message when I try to access documents and setting folder and many other folders are the same....the message reads : permission to use object denied. check the file or folders security settings to see if you have access I have tried google for answers and have tried setting the folder security settings to allow access but nothing changes. I have an administrator account and have tried various things with no results.I just want access to every folder like I have on my PC running XP.
After backing up my files to another drive, I couldn't access some of the files on my C: drive [the one I backed up files from to my D: drive]. I'm always on the administrator account, and there are no other users on this computer, and I've set the file so that the administrator has full control over it.Normally, I should be able to access the files [for example, my 'My Documents' and my 'My Videos' folders are unaccessible].
I had a go at installing Windows 7 yesterday and have run into a small hiccup.On my XP installation, my HD was partitioned into 2 drives, C: and D: (both the C and D drives are NTFS formatted).C: was used for windows and program files.D: was used for my documents eg. videos, photos etc.I installed Windows 7 as a fresh install to the C: partition and the installation went smoothly.However, My Computer, I can see the D: drive listed, but every time I click on the icon it says "Access Denied - Drive Not Accessible"All my stuff is backed up on an external drive so I'm not too worried about re-formatting HD etc, but wondered why it is doing it and if anyone knew a way to get my D: drive back without formatting?
My husband and I have been trying to get pictures from our camera (Fuji FinePix S3400) to the computer with the supplied USB lead. WE have been able to do so by taking the SD card and shoving it into the computer but we can't do so with the lead which we prefer to do. It seems wrong that we can't do that! With lots of going into all jigging around into files and setting we keep getting the message, "Access is Denied". We have even got into security of the folder and put in "Authenticated Users". We have an Acer that was bought with Vista and then converted to Win 7.
I seem to be having a problems with my computer's Administrator perks. My account is an administrator, and recently, I have been unable to do anything that requires that I be an administrator. Whenever I run an application that is set to Run as Administrator, an error box opens that says "The specified module could not be found" I can not access User Account Controls, the window just does not open, no error message. I can use applications that would normally display the error message in Safe Mode, but I still can't access things like User Account Controls.
I usually save passwords on Wordpad but it's developed that when I try to save a new entry I get this message 'access denied'. If I make a new file in wordpad then I can save the new entry.
Ok, I have XP and Win 7 setup in dual boot mode, but I can't run XP because (I am pretty sure) the boot.ini file I have in Win 7 now is pointing to the wrong disk and partition for the location of XP. So I wanted to edit the boot.ini file and change the numbers so that it would point to the correct one. But when I go to save changes I keep getting "Access Denied" message. I have admin privileges, so I don't understand why it won't let me write to it. Is there a security setting I need to change so that I can edit this file?
I managed to remove all user access to the windows drive by mistake.
Now i cant access my main windows drive. Windows runs fine but i can't run some software, save any files to desktop and stuff. Please help as i don't want to reinstall ! i dont' see any security tab inside properties.
