Windows 7 Ultimate Won't Update
Nov 6, 2012
I had the net turned off for a year and had it turned 3 months ago. I just noticed after 3 months of use that my Windows 7 wasn't updating. When I try to update I get a Windows Update box that states: "Windows Update cannot currently check for updated, because, the service is not running. You may need to restart your computer." Restart does nothing. Tried it in safe mode, and I also tried the "system readiness update", and nothing. Same error.
View 7 Replies
ADVERTISEMENT
Oct 28, 2012
I have a desktop using a Gigabyte GA-Z68X-UD3H-B3 (revision 1) motherboard. Using the Gigabyte @Bios utility, I updated the Bios to F12. After rebooting as @Bios suggested, I can no longer get Windows to boot. I've noted the following:
1) I have issue accesing the Bios setup. Sometimes I can access it, sometimes I cannot;
2) When I am able to access the Bios, I can confirm the disk Boot Priority, however it's is now showing the drives as SCSI (I only have SATA drives);
3) There is a new setup screen displayed after the Gigabyte logo screen shows. This screen now shows 'Serial ATA AHCI, Version iSrc 1.20E.
Copyright (c) 2003-2008. Intel Corporation.
**This version supports only Hard Disk and CDROM drives. **
Please wait. This will take a few seconds.
Then shows Controller/Bus/Function/Port/Device and lists all harddrives. At the end of the drive list it shows 'AHCI Bios installed'
4. After step 3, it shows the prompt 'Loading Operating System' - the boot hangs at this point.I DID backup the existing Bios before updating it. I have not gone in and copied that file to a floppy to try and flash the Bios using the backup (don't know if this is possible).
View 3 Replies
View Related
Aug 4, 2011
Ok, so i have just built my pc and have been finding it impossible to update to service pack 1. The reason given is: Code 80070057 Windows Update encountered an unknown error. I have researched this type of topic for about 2 days now and haven't found any good solution so i'm trying to post myself now. I have run an sfc scan and this is my test results:Here is some more info about my PC.
View 7 Replies
View Related
Aug 13, 2012
office 2077 update
View 3 Replies
View Related
Feb 8, 2013
I want to install microsoft security essential updates.
View 4 Replies
View Related
Mar 15, 2012
pci device isnt installed
View 1 Replies
View Related
Aug 3, 2010
Can I upgrade from Windows ultimate 32bit ver 6.1 ( build 7600) to windows 7 ultimate 64bit edition and keep all of my installed programs and files ?[meaning not having them moved to a new folder called windows.old]
View 3 Replies
View Related
Jan 30, 2011
I'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.
View 1 Replies
View Related
Nov 3, 2012
The update is called:
nvidia - Graphics adapter WDDM1.1, Graphics Adapter WDDM1.2, Other hardware - NVIDIA GeForce GT 425M.
After installing it, whenever my laptop tries to use the Nvidia card, I get a blue screen and the system restarts. I looked in installed updates to uninstall it, and it is not there. I did a system restore to four days before I installed it, and I still get the same effect. Lastly, I installed some older nvidia drivers that used to work using the clean install option, and I still have this problem.
View 1 Replies
View Related
Oct 30, 2012
A while back, after successfully downloading and installing some updates in the Windows Update, it prompted me to restart the computer to finish the update installation process. However, I continued to use the computer for quite some time before restarting it, and then when it tried to configure the updates on the start-up screen, it showed that it was not successful in doing so. In the past, I noticed that this would typically happen when I did not restart the computer immediately (or within a short time) after the updates finished and I got the prompt to restart. I would have to go to Windows Update and do it over again, and then upon immediate restart, it would always work properly. But this time, it did not, and I keep getting the 8000FFFF error message instead.
Also, now, every time I start the computer, it shows that it's "Preparing to configure Windows... Do not shut off computer" (presumably the updates that never got completely and correctly configured) in the start-up screen... gets to 35%..fails... shuts down (screen goes black)... restarts again... tries to configure again, fails again, shuts down and restarts again... tries to configure again, fails again, and finally it apparently gives up and says "reverting changes" and finally goes to the desktop.I've looked at the answers in several threads at the answers.microsoft.com forum that were started by people with similar problems, and also tried several of the Microsoft "FixIt" files on the Microsoft site, but none of them worked. I'm using Windows 7 Home Premium.
View 8 Replies
View Related
Nov 3, 2011
How to View Windows Update History Details in Windows 7 ?
View 0 Replies
View Related
Feb 21, 2012
I bought the full retail Win 7 Ultimate and trying to upgrade Windows Vista Ultimate to Win 7 Ultimate, both 32bit. I get to the Expanding Windows files to 21% and nothing. The program is still running and stuck at 21% but after waiting 3 hours I shut power off and Vista was reinstated. Why can't I get past 21% Expanding Windows files? I want to use the upgrade because I have a ton of programs on my Vista and don't want to spend days reinstalling them.
View 9 Replies
View Related
Dec 29, 2012
how can i change my 32 bit win7 ultimate free dos to 64 bit win7 ultimate?can i do it without charge? where can i get it done?? can i get the iso/disk in downloadable format?
View 6 Replies
View Related
Jun 21, 2010
How to Uninstall a Windows Update in Windows 7 ?
View 0 Replies
View Related
Oct 25, 2012
My windows update does not like to load! It takes a very long time and sometimes causes explorer to crash! When I checked, I had 92 updates to install. When I click download and install, it would freeze and stay there for a long time. I tried to use the Fix it application, however that gets stuck on "Checking Online for Updates" as well! What should I do? I also tried to update in safe mode, but it wouldn't let me.
View 4 Replies
View Related
Oct 12, 2011
Is this file safe to have operating on my computer???
View 2 Replies
View Related
Apr 22, 2012
I use iTunes because I have an ipod touch, iTunes wants me to update it before i will sync my ipod touch. It won't update it tells me to download only the update threw the software, I've done a google search and no one that posted a fix had one that worked, i've have this issue before and i tried to uninstall and reinstall itune and nothing worked.
View 5 Replies
View Related
Nov 21, 2011
I have an HP Dx7500 that run perfectly.Before making any change i made a checkpoint for future restore. Than i update my AHCI driver (Instead regular IDE) to "Intel ICH/10R SATA AHCI controller" and windows update can't run, no error.. just clicking and nothing move.I fix it for now with system restore.. but i want my hardware to be most updated.
View 1 Replies
View Related
Oct 12, 2009
I've tried to upgrade from Vista Ultimate 32 bit to 7 Ultimate 32 bit numerous times now, all with the same result: a BSOD during the install process, which I get during (what I think is) the final step called "Transferring files, settings and programs."
The installation compatibility test warns me about my Nvidia drivers, which I've attempted to both remove and upgrade to the latest version, but that doesn't seem to make a difference (I still get the warning during the compatibility check, and I still get the blue screen). I'm not sure that's even the problem, either. I can't (easily) remove/replace the video card, since my mobo doesn't have onboard video, so I'd hopefully be able to avoid having to do that.
The error in the blue screen is a nebulous "REFERENCE_BY_POINTER" message. The technical information is "STOP: 0x00000018 (0x00000000, 0x86478030, 0x00000002, 0xFFFFFFFF)."
As a zip file, I've attached the setup log, error log, compatibility report, and what I think is the setup dump file, all of which I found in C:$WINDOWS.~BTSourcesPanther (I believe that's the right place to look). The logs complain about BthMig problems, which I think has something to do with bluetooth, but I don't have any bluetooth peripherals. I've uninstalled things that I thought might have some bluetooth things in it, like MS Intellitype (maybe a stretch), but again, no difference.
System specs: AMD Athlon 64 X2 6000+, on an Asus M2N SLI Deluxe, with 4 GB of ram, and an Nvidia GeForce 8800 GT. The hard drive I'm installing (upgrading) on has about 100 GB free.
View 1 Replies
View Related
Oct 26, 2009
I'm trying to upgrade a computer from Vista Ultimate (32 bit) to 7 Ultimate (32 bit) and I keep receiving this error message:
"This installation disc isn't compatible with your version of Windows. To upgrade, you need the correct installation disc. For more information, check your computer's system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select Custom (advanced)."
Now, I double-checked all the system requirements and the system is compatible with 7.
View 9 Replies
View Related
Jun 19, 2010
Today I began installing windows 7 ultimate on my laptop. However, I grabbed my ultimate N disk instead of my Ultimate disk. is there a way to upgrade to normal ultimate version. I have setup windows media center on every tv in my house and would like to have it on my laptop lol. I would realy rather not wipe and reinstall so i dont have to install all the drivers and anitvirus again...
View 3 Replies
View Related
Oct 6, 2011
Previously i used Auslogic Boostspeed to optimize my computer. Instead it backfired and deleted my System 32. After i reinstalled my Windows normally and got my programs fixed i can't update through Windows Update. Nor can i reinstall or unistall Microsoft Word 2010. It comes up with the error code "80070643".
View 6 Replies
View Related
Nov 9, 2011
As you can see in this picture, i can't successfully install certain KB security updates. I downloaded the "Hotfix for Windows" as you can see
View 9 Replies
View Related
Jan 15, 2013
OK, first I have to say I am a complete piker with this stuff. If I have to do anything that requires changing the BIOS or registry or anything like that, I am gonna have to pay someone to fix this.OK, here is my problem. Windows update fails with a code 8007370B. I have Windows 7 Pro, a Dell XPS 9100 with 16GB RAM, which I added, as well as a Asus ENGTX460 Top video card. The system has worked great with this configuration for well over a year. I use MSE as security, and Zone Alarm for the firewall.I have been getting this code since October. I tried doing the windows troubleshoot and fix links, I tried Fixit, I tried System Restore, nothing worksThe system also says under last time updated "Never" and it displays no record
View 9 Replies
View Related
Jan 2, 2012
I did an update of Windows last week, which included two critical fixes (I think both were related to .NET) and two "optional" security updates. I updated, rebooted, and now Windows Update no longer works: the icon is missing from the menu item, and when I click it nothing happens. The Windows Update service is running; tried restarting that as well. Tried a .NET cleanup utility, but all that seemed to do was remove or break one of the .NET version installations (a game that uses .NET complained after running the utility, and stopped complaining after I manually re-installed .NET 3.5 and updates).
View 14 Replies
View Related
Dec 1, 2012
My Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
View 3 Replies
View Related
Jan 2, 2012
Win 7 x64 update KB2656351 seems to download and install smoothly, but within a few minutes it wants to update again and again. It doesn't matter how many times I update. It doesn't ask for rebooting, but if I do it doesn't make a difference either.
View 9 Replies
View Related
Aug 17, 2011
I am about to install windows 7 on my Mac Via bootcamp, The issue that I am having is that I lost my windows 7 x32 Pro CD but I have my CD key. Now I have a copy of Windows 7 x64 Ultimate. My question is, can I use my CD key for Windows Pro while using the Windows 7 x64 Ultimate CD just to install windows 7 pro?
View 7 Replies
View Related
Jan 10, 2013
if this has been asked before, but I was wondering how many GBs of storage Windows 7 takes up? I was recently given a 60GB SSD for my computer. The plan was to install Windows 7 and a few programs / games on the SSD and use my 3TB HDD for everything else. After I installed Windows 7 Ultimate x64 and a few basic programs my SDD is practically full. Is this normal?
I installed practically all important and optional updates Windows offered. Looking back on it now I am thinking that this might have been a problem. Are there updates that take up a lot of memory that I don't need? Also is there a way to uninstall previous updates?
View 9 Replies
View Related
Nov 27, 2012
I know that to add more than 8gbs of ram you need win7 pro or ultimate. My question is, do I go for pro or ultimate? (Upgrade). Also what are the true benefits of having say, 12 or 16gb of ram?
View 5 Replies
View Related
Jan 12, 2013
i have M2A-VM mother board just installed windows 7 home premium 64bit now i have no sound and when i put my board driver cd in it says it dont support my sytem . how wouldi get my sound 2 work when i try to play some thing like music its like a cb or some sort of interferince.
View 6 Replies
View Related
