Window Media Center - Cannot Configure Because TV Tuner Not Detected
Mar 13, 2011
I had to install a new hard drive in my Dell 1440 laptop and before doing this I could play my window media center but not after installing the new hard drive I am unable to use my media center. Every time I try to set it up it say "It cannot configure because a tv tuner is not detected. I want to know do I have to purchase a tuner or what. I am running Window7 64bits.
View 5 Replies
ADVERTISEMENT
Nov 20, 2009
I'm looking for some advice for a TV Tuner Card/Non Media Center.
I would like it to work both cable and over the air.
I don't have media center
Remote included
Able to record
no radio necessary
I guess that's it.
P.S. I have 2 9800 nvidia cards if that matters.
View 4 Replies
View Related
Dec 8, 2012
I installed a USB DVB-T TV stick together with the supplied software and driver. On loading the software it found the tuner and scanned and found all the channels and the TV appears on the screen. However, when I try to use MC it says there is no tuner available. Devices & Printers lists an Unspecified Device but names it as a TV stick and says the driver is fine and everything is working normally. Troubleshooter says there is no problem to troubleshoot. I have unplugged and replugged the device several times and have also rebooted several times with no avail.
View 1 Replies
View Related
Feb 10, 2011
I have a USB TV Tuner which works fine to watch TV in WMC. However, when a programme is set to record, and my laptop goes into sleep mode, I believe it turns off the USB TV Tuner, and therefore the programme doesn't record. WMC support center says that the program is able to record when the computer is in sleep so I know it is not the program which is the issue.
View 1 Replies
View Related
Oct 15, 2009
every time i run windows i get two drivers with a yellow exclamination mark beside it.
Conexant does not help you at all on their website, and HP does not help at all because i have windows 7 not their 5 year old windows MCE
The two drivers i need are
Conexant 2388x MPEG Encoder (Dual-Input)
Conexant 23800 Video Capture (Blackbird NTSC Dual-Input)
each time i try to uninstall and reinstall them i get an error.
the software for this device has been blocked from starting because it is known to have problems with Windows. Contact the Hardware vendor for a new driver (Code 48)
This is weird because it worked fine on windows xp, but not windows 7 no drivers for it??? and if not how would i request them to get that driver?
View 2 Replies
View Related
Feb 23, 2011
I am a relative novice at this. But I would like a recommendation for a tuner card for my windows media center. Currently I am trying to use a hauppauge 1250 tuner card but am not able to get digital channels, only analog. Am using it with a digital cable box with coax connection. This card is 3 years old. Would one of the newer cards work better for hd tv on my computer? I have downloaded latest drivers/software from Hauppauge.
View 1 Replies
View Related
Oct 20, 2010
I have a solution for the "no tv tuner" in ati catalyst media center, Windows 7 if
View 1 Replies
View Related
Sep 16, 2012
verything was working fine, i could use media center for watching TV, recording. ect .. all of it. I didn't install any updates, or add any new hardware or anything. I should do the computer started it back up, turn on WMC went to live TV and all i get is a BLACK WINDOW, with sound .. but no picutre
OS Windows 7 64 Bit ATI Radeon HD 4670 - Last driver update July 7th 2012 Driver version 8.970.100.300 TV Tuner - Hauppauge 950Q Mother Board - GA-H55M-S2V V1.4
I'm so at a lost as to why video won't work. I use WINTV7 and everything is perfect. Like to use WMC as it is had your tv listings and and quickly record what i want.
View 3 Replies
View Related
Nov 8, 2012
I have two computers. One a year old and one brand new. Both are running Windows 7 64 bit and both are running the exact same version of Windows Media Center. On my old computer I have my Windows Media Center TV configured for channel 3 and the cable attached to my internal TV Tuner card. Then, to access different channels I simply use the remote controller that came with my cable company set top box. Never any problems. Now, I am trying for three days to have Windows Media Center set up the TV stations on my new computer.
The device manager is finding the TV Tuner Card that I installed. All the drivers are up to date. I can use WinTV to find and play channels so I know there is signal coming from the cable...the same cable that feeds my old computer...I simply unhooked it and attached it to my new computer. So, it's driving me crazy that each time I try to scan for channels I wait for 10 minutes each time only to get a message at the end saying "no tv stations found" or something like that. What could I possible be doing wrong since everything is the same between the old and the new computer?
View 5 Replies
View Related
Feb 5, 2010
i'm running windows 7 ultimate 64 bit and i'm trying to setup my tv signal on the windows media center.
i have an mce remote and transceiver listed on the device manager as "Microsoft ehome infrared transceiver".
when i run windows media center i can actually use it to operate but during tv setup process i get an error saying "windows media center cannot detect yor ir receiver. make sure that your ir receiver is connected and then select try again".
"ir hardware not detected".
this is so weird because as i stated before i can actually use the remote within the windows media center but for some reason it reports it can't be detected so i can't get pass this problem and continue setting up my tv.
what can i do ?
anyone ever stumbled upon an error like this ?
View 1 Replies
View Related
Oct 26, 2009
I am running Windows 7 Ultimate x64 build 7600 United States English version.... Internet TV and Sports are missing from Media Center, I am at a loss..
View 0 Replies
View Related
Dec 25, 2012
I've tried loading media center but when I do I get the message "Windows cannot open this program because it has been prevented by a software restriction policy. For more information, contact your system administrator." The computer is my home PC, I am the only administrator... I'm assuming one of the programs my buddy put on my computer is stopping the program from running. He said the programs would make my computer run better. I had to manually turn on windows media center before from my control panel before. I also tried running the program as admin or even finding the ehshell.exe and running it from their.
View 6 Replies
View Related
Nov 22, 2009
Installed Windows 7 yesterday and now my system does not detect my TV tuner. I believe I have an AverMedia A317 Mini Hybrid card.what I can do.
View 9 Replies
View Related
Aug 20, 2011
My Graphic Card AMD Redeon HD 4600 Series & 11.8 Driver. Any recommended For CCC Setting ?
View 4 Replies
View Related
Jan 18, 2011
How to Change the Default Windows 7 Media Center Media Browser Icon ?
View 0 Replies
View Related
Jul 25, 2011
I'm in grave problem here. I just installed windows 7 x64 a few days back. And initially I installed the 32bit version of k-lite codec pack for my windows media player. The media center worked fine then. It was loading my ffdshow and ac3filter along as I checked it.But then yesterday I noticed that the same pop-up od recommended/express install of WMP came again. Initially I thought that it must be some bug or something, but then when my MKV and AVI files didn't work in WMC, I realized that somehow WMP x64 got triggered, and now it is using the x64 bit of WMP in WMC. And I just wanna revert back to 32-bit WMP in WMC.
View 9 Replies
View Related
Jan 15, 2009
I have checked two seperate DVD movies and they stop after the splash screens, FBI warning and Corporate logos, and never make it to the DVD menu.
This DVD player is an external player and I have no problem with playback on my Dual boot with Vista Home Premium.
Any suggestions?
View 5 Replies
View Related
Dec 20, 2009
I can't get eithe WMP or MC to play a DVD. I've set the region code. WMP acts like it will play, but then just goes blank, and MC says it cannot play the DVD. These are original discs, not burned copies. I have a custom built system, with 2 graphics cards (GTX 260 and a GT 220) 6 GB of RAM, and an i7 processor. Any help would be greatly appreciated.
View 7 Replies
View Related
Aug 10, 2011
Currently I am having problem to turn on my window security center. Solution that I have tried is:
1- By going to services>>properties>>automatic /automatic (delayed start) - failed
2- Already scan with malwarebytes anti-malware and removed affected files - failed
Because of this, I cannot install or update my windows update and antivirus.
View 3 Replies
View Related
May 9, 2010
When I open Windows Media Center - Internet TV is listed.On the windows website it shows that I should have that option.So, I assume I don't have something set up right.I have a TV tuner and I can record and watch TV just can't get to see the Internet TV channels.
View 1 Replies
View Related
Jan 19, 2011
I am running Windows 7 on a new computer with no TV tuner. I am unable to see Internet TV or Netflix in Windows Media Center. When I try the automatic download (Download Now) option, I get an error message that the Guide cannot be downloaded.After looking at these message boards, I have tried turning off my firewall before downloading and tried adding the Media Center programs to the allowed programs in my firewall application, but I still get the same errors.
View 3 Replies
View Related
May 9, 2011
I am building a Media Center PC. I have two questions relating to Windows Media Center:
1) I can watch TV via TV card, but can I watch TV from another source such as HDMI or AV from my satalite reciever or PS3?
2) Can WMC work with a dual monitor graphics card? I would like to transmit the media center screen via AV to monitors & speakers, while being able to use the PC for other use via VGA connection.
View 2 Replies
View Related
Apr 25, 2012
I used to run media centre wired and it worked fine. Trying to clean up cables running all over the place Ive tried wirelessly yet its almost to the point that it doesnt work at all as its incredibly slow and takes about a minute to react to controller input.Im running a TP-LINKTD-W8930N 300Mbps router.
View 3 Replies
View Related
Oct 14, 2009
I'm having trouble combining PowerDVD9 x 7MC when I play my Blu-rays from the driver, crashes, excessive delay to load the movie, etc
When I use PDVD outside of 7MC everything works perfect.
I wonder if I can put a call to PDVD on the media center menu to have it working outside of MC.
is it possible?
View 3 Replies
View Related
Nov 14, 2009
in Win 7 Ultimate I insert a DVD, and the only options for playback are Windows Media Player and Real Player - with Vista, I used to have an option to play the DVD in Windows Media Center, which is what I want. Is there a way to get this option back?
View 6 Replies
View Related
May 30, 2011
After downloading some media software she has changed a setting so that media center opens for every program.
I have tried the steps of turning windows features on and off but when i click the link media center opens again!
View 3 Replies
View Related
Aug 19, 2009
I have installed Windows 7 Professional on my laptop and it has Media Center. But I can't see any way to access Netflix. Is Netflix support available on Windows 7 Media Center?
View 7 Replies
View Related
May 9, 2011
Netfix is shutting down Media Center when we try to watch a movie. It was working fine but this morning every time we try to access Netfix we get an error saying Media Center shutting down and restarting?
View 2 Replies
View Related
Jan 31, 2011
Have a Dell Vostro 3500 running Win 7 32 bit. When trying to view a pdf from within IE, it will attempt to open it with Windows Media Center. Adobe Reader has been installed, and when checking file assocaitions in Windows and IE, they are set to Adobe Reader. Now, if you save the pdf to the desktop, or some other location on the hard drive, it will then open with Adobe Reader as it should.
View 3 Replies
View Related
Feb 8, 2009
I have Asus 4550 video card The drivers are crashing in MCE very frequently ( Black screen and then BSOD and instant reboot so I can't even read the error) I tried driver that was optional in Windows 7 update, Catalyst 8.12, 9.1 and Windows 7 beta - they all behave the same way .
Any ideas ?
View 1 Replies
View Related
May 14, 2009
How to add my favorite internet radio to media center? This option is not available. Or I do not know how to.
View 6 Replies
View Related