Like my subject says, my comp won't start up and can't fix things automatically cause the Internet isnt hooked up. I'm worried that everything I have for school and music will be lost..
View 6 Repliesusing windows 7, have a blue screen at start up issue, memory dump. Sadly the PC wont start so unable to try too much, it lets you select user, attempts to ,log onto the user then just goes to mthe blue screen and starts the cycle again. It will not start in safe mode either, basically the same result although sometimes it loads and you are in but when you try to do anything it goes to the blue screen again. I did get the error code (not always the same on the blue screen but this one comes up most time), "driver IRQL not less or equal"
View 2 Replies View Relatedi just work on ma pc by win 7 installed but suddenly blue screen came and i restarted.till that time im trying to turn on ma pc but in start up blue screen shows up and restart automatically. i try in safe mode pc comes up without any problem.
note: I have win xp too please help this is my dump file
http://up.iranblog.com/37261/1265481900.rar
I recently got a new netbook and have had a problem with it. On 3 occasions now, during startup I have got a blue screen and although only around 4 weeks old, I have already performed a full restore. The netbook in question is an aspire one d270 windows 7 starter (not my choice of netbook but neither here nor there). Obviously I have programs like adobe up to date but other than using microsoft programs I have only installed avast and firefox.
Following link above... Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Starter, Service Pack 1, 32 bit
Processor: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz, x64 Family 6 Model 54 Stepping 1
Processor Count: 4
RAM: 1012 Mb
Graphics Card: Intel(R) Graphics Media Accelerator 3600 Series, 3 Mb
Hard Drives: C: Total - 291830 MB, Free - 260174 MB;
Motherboard: Acer, JE01_CT
Antivirus: avast! Antivirus, Updated and Enabled
I got the error when Windows started up!!
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.1
Locale ID:1033
Additional information about the problem:
BCCode:100000ea
BCP1:86232030
BCP2:00000000
BCP3:00000000
BCP4:00000000
OS Version:6_1_7601
Service Pack:1_0
Product:256_1
Files that describe the problem:
C:WindowsMinidump121711-39906-01.dmp
C:UsersAdministrator1AppDataLocalTempWER-123843-0.sysdata.xml
Read our privacy statement online: [URL]
If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt
I can not get my computer to start up. I have gone through the recovery start up, pressing F8 to get to the screen, after pressing system recovery, it just takes me to a blue screen and then back to the page that tells you windows failed to start up normally. I have tried safe mode, the same thing happens and then I tried last known good configuration. That led me back to a blue screen with nothing happening except the lights on the front of the computer blinking white several times, then orange back and forth. At one point it did go to a black screen with the lights on the front blinking, but it did that forever and nothing happened
View 3 Replies View Relatedhow to enable hibernate on Windows 7 and I read the article in the following link: Hibernate - Enable or Disable
I tried the third option, which is changing the value in the registry of the windows. After changing the value, I restarted the computer, which is what I was asked. While I was expecting to see the hibernate option enabled, I ended up with the blue screen. After the windows logo on the start up, blue screen shows up on the screen with dumping the memory. Now, I don't know how I can revert this back. Ok, I don't want hibernate enable anymore but at least I need my windows back.
I been working a a friends netbook for about 2 weeks now and I can't seem to find a fix to the problem. Once I got Windows 7 on it but when my friend started putting music on it it crashed. So then after that I installed Ubuntu on it and that worked for a little bit but it still crashed. Then I installed Windows 8 on it and it worked for fine for a few days then it quit working. So I decided to install Windows 7 back on it and after it dose a complete install where the screen should install the drivers I got a short blue screen then the netbook restarted. So now when you boot it up it try's to load windows but after it bets passed loading it restarts the computer. The netbook is a Asus Eee PC 1001p.
View 4 Replies View RelatedI am experiencing problems with my computer. I'm building a new rig, but have not got it finished yet, so I'm trying to use my Compaq Presario until I have the final pieces to my new rig. I popped in my GPU and tried to boot into Windows 7 one day, after having used Ubuntu for three weeks straight, now I get a blue screen at start up, when I have the GPU in, that says I should try to reset the device display [it goes too fast for me to catch anything else].
Safe mode works, but I have no internet connection to be able to download anything that I might need. I also checked the device manager through Safe Mode and my GPU is update to date. I'll post the log files and the GPU at the end. The card was working before, so I'm not sure what happened. Here are some things I tried via online searching including this forum:
Reinstall Windows completely
Uninstall NVIDIA drivers, reboot, and reinstall
Not update GPU drivers
Switching the BIOS to my GPU slot
GPU: GeForce Sparkle 6600 LE 256mb
Report file:
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7600.2.0.0.768.3
Locale ID:1033
The other file is a dmp file and an xml file I have no idea how to open. If they are needed I saved a copy to a USB and will upload to mediafire.
Yesterday I got this virus, I went and bought trend micro titanium and cleaned it up (was using a free30 day trial of something else) but I'm still having a problem. Whenever I go to shut down or restart my computer, it starts doing it like normal, but right at the end I get this blue screen with a bunch of messages written, it last about 5 seconds while a countdown happens at the bottom of the screen, then it restarts (even if I went Shutdown).
Sometimes minutes after I log back into the user, the blue screen comes up out of nowhere, does it's 5 second odd countdown and restarts. I should get minidump files. The countdown at the bottom of the blue screen is called "crash dump" or something like that. With the virus whenever I tried to open an internet explorer or google chrome window, all that would come up was "win 7 home security", I'm not getting that anymore though after doing the full scan with trend.
Additional info: I have windows 7, my pc is a HP Pavilion laptop, model number is DV6 - 2144TX
When starting up get blue screen and says it is trying to repair problems. Was working fine when turned off a few days ago.
View 3 Replies View RelatedI don't know where to find the dump files or else i'd post that for you. I seem to only have an issue with crashing when my LAN is enabled. I'm on an HP G61-632NR laptop running Windows 7 64 bit.
View 3 Replies View RelatedMy problem is whenever I want to view mp4 files in WMP, it freezes for a while then blue screen. I reinstalled Windows just now but the problem seems to occur again.
I don't know what caused this, I have attached my dump files as suggested in the sticky thread.
I downloaded some new drivers and updating everything was going good my screen went black my resolution went down then it went black again. it just stayed black then i got the blue screen and i cant start up windows.
View 6 Replies View Relatedmy Toshiba Satellite C655D wont reboot it gets to 95% and says error then a blue screen pops up and says it is crashing . Is there anything I can do to repair it . I dont have a repair disk.
View 2 Replies View RelatedI am getting the blue screen error.but it is not significant. happens anytime. sometims pc works 24 hours without error. somtimes it comes.
View 1 Replies View Relatedi have acer aspire 2930Z and i had vista on it and the computer was loaded with junk i decided to upgrade him to windows 7 after i did he keep crashing and i dont know why.i have this dump files, can any one help me understad them? download now for free. File sharing. Software file sharing. Free file hosting. File upload. [URL] - download now for free. File sharing. Software file sharing. Free file hosting. File upload. [URL] - download now for free. File sharing. Software file sharing. Free file hosting. File upload. [URL]
View 2 Replies View RelatedI frequently backup files for other users and start w/ a new clean OS. I tried looking for some articles online, but none were really informative for me - wasn't what I was looking for.
I was wondering if I could get some help here. Doesn't really matter the OS, mostly XP, Vista, or even Windows 7, but I guess the file structure btw. Vista and Windows 7 arn't really much diff.
I consider myself relatively computer savvy, and I even talked to my IT-professional soon-to-be brother-in-law... but now I turn to you, BleepingComputer. I really need help here.Short Version:I keep all of my personal files on an external hard drive. That 1TB hard drive was getting full, so I bought a new 2.5TB hard drive. I start working from the files on the new drive. After about 30 seconds or so, folders just show as 0 bytes and "There are no files in this folder". The hard drive works on other computers (HP laptop) but not my Dell desktop. This has happened (sort of) with three different, brand new external hard drives. What would cause this?Super Long VersionI'm running a Dell Precision T5400 workstation with Windows 7 64Bit Home Premium. I keep two 1TB redundant drives at all times, synced monthly via SyncToy. The 1TB drives were filling up so I bought two 2TB Seagate external drives. And then this string of events happened:
1) Copied all of the data from the 1TB to a 2TB SEAGATE drive.
2) SyncToy'ed them to ensure that all of the data was definitely there.
3) Retired the old 1TB drive.
4) Began to duplicate the 2TB drive to the other 2TB drive.
5) In the middle of copying, I received the error, (something like) "Cannot copy files as the source file no longer exists".
6) Checked Disk Manager, and the 2TB drive shows up as RAW format now?! It was originally NTFS. Search Seagate forums and you'll find that this is a common problem.
7) Restart. Same problem. The other 2TB SEAGATE drive now has "USB device not recognized" errors.
8) Try restarting, copying over and over. Same results.
9) Plug both drives into my work laptop (Mac Bootcamp Windows 7 64bit). Both show up as "Drive needs to be formatted to proceed".
10) I format both of them and perform check disks on my Mac Laptop.
11) They're fine. Then I plug them into my Dell Desktop.
12) I run SeaTools on them. One has an error and can be RMA'd. The other is "USB device not recognized".I RMA them both and mail them in.At this point, I hate Seagate because they seemingly sold me two faulty 2TB drives.
13) I buy two new 2.5TB Western Digital Hard drives.(expensive. btw).
14) I un-retire my old 1TB drive and plug it into my Mac Bootcamp laptop. Disk has errors. Run the recovery tool. All seems well.
15) I copy my 1TB to one of the 2.5TB WD drives on my HP laptop (it's super old, and I had to go to work with my Mac)
16) I plug in the new 2.5TB drive to the Dell Desktop, and some of the folders show up empty?!?
17) Plug that drive back into the old HP Laptop all of the files show up.At this point, I'm super confused. There's clearly something wrong with my desktop?
18) I perform the following while checking the disk in between each new trial: system restore, uninstall USB drivers/host controllers, start in safe mode. Nothing works. Same problem. Folders show as empty.
19) Plug the drive back into the HP laptop. Files are there.
20) Re-install BIOS on the desktop. Folders show as empty.
21) Run Malwarebytes, HiJackThis... nothing out of the ordinary.
22) The computer doesn't fully start up when the 2.5TB WD drive is plugged in.
23) I run startup recovery. It spits out a bunch of errors. Fixes some, some not.
24) Folders show as empty.
I'm trying to find the best way to
1) create a disk image for disaster recovery
2) synchronize folders and files to protect against accidental deletion, erroneous save-overs, transferring to another computer, etc.
I have a 1 Tb external hard drive which is plenty of space for me to use for both.Can be either one program that performs both functions, or two separate programs. I don't want automatic backups, since I plan to store my external drive in a fireproof safe soon. I need the sync'd files to be browse-able (not contained in a single image file)...just like a flash drive basically. I would like something that only backs up new files or ones that have been changed (to cut back on backup time...but maybe this is standard for syncing and mirroring programs. ??) Needs to be able to handle long file names A nice GUI Cost - free to low (I'd pay up to $30ish...but free would be great) I was thinking of using Windows 7 Backup & Restore for the disk imaging, and then SyncToy for the file/folder syncing...but is this the best option?
I have win 7 home basic in one of my laptop. I wanted to know if all my personal files and programs like ms office will go if I upgrade to win 7 ultimate. I have ultimate's cd with me. I just wanted to know if I will lose all my programs if I upgrade from home basic to ultimate.
View 4 Replies View RelatedI have a computer with three partitions, the first with 100GB exclusively to Windows 7 (already installed), a partition for applications and another partition for personal files (photos, text, music, movies, etc.). I wonder how to configure the location of "My Documents", so that all users have only their personal files on drive of personal files. In Windows Explorer changed in each of the users the location of the Documents, Music, Video and Pictures.
- After changed the location of the folders above, there is still the same folders in C:users , and there are user settings that are there defined, eg Desktop, in C:Users. Is there any way to move all settings and folders to another drive?
- Is there any way to do this operation automatic? for future users I will have to repeat the same operation, how can I indicate that all future users will have their settings and documents specified in this specific drive?
I installed some applications and found that some applications did not demand that the location where it was set to be installed the application, having been installed in C:users and C:Program Files, intended that all applications (except for windows and Office) were installed in drive applications. How do I specify that this is the default drive for installation applications? Keeping the installations of Windows + Office in this drive. Applications installed by the administrator are available for all users or must be given access to other users ? How done? In the drive file, which should contain the users and shared files, meant that each user only gets access their documents and shared. Where and how can make this configuration?
my Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!
View 3 Replies View Relatedone day it suddenly crashed while i was watching a movie. it displayed random patterns on screen. kinda like part of the image from the video is on the screen then a black strip and random colors. I restarted the unit to safe mode and left it on and browsed the net and downloaded some big files for how many hours and nothing happened.. there are also times when windows is still loading with the windows logo on screen, it crashes. there are also times when the login screen is displayed and it crashes. it just crashes randomly! so i tried to reformat it. i deleted the partitions and created a new one, formatted it then fresh installed windows 7 ( my previous OS is windows 7 by the way) and started installing the basic drivers and after a few hours, it crashed again...thinking that the driver installed might not be compatible, i tried another fresh install of windows (same execution, delete partition, create, install OS) and this time, without installing the drivers, it crashed again after a few hours... sometimes it crashes immediately after turning it on from cold start!
View 7 Replies View RelatedMy headphone jack is broken. Sometimes if the headset is in just right you get sound for a second but then you l loose it. What do I need to do to get it fixed?
View 1 Replies View RelatedBlue screen and freezing. This is happening frequently but never has any regularity to it. Sometimes happens after a couple of days and sometimes after a couple of minutes. Also sometimes with only one browser window open and sometimes with 15 or more. Happens with both chrome and firefox. Has not happened with other programs as this lapy only gets used for surfing/email/forums etc. Sometimes happens while the computer is sitting idle right after boot. Very strange.
View 3 Replies View Relatedi found that my computer stopped getting access to web browsing, only afects the browser (firefox, iexp), but every other aplication thet needs network, they go fine. I saw here a solucion by running cmd and make winsock reset, it worked well, but just until i restart the machine then have to winsock reset again.I recently instaled sp1 for Windows 7, i did restart the computer a lot that day and never had this issue. Router? Avast 6?
View 8 Replies View Relatedloose icons after monitor sleeps
View 1 Replies View Relatedi am using win fax pro 10 on XP professional.i need to convert to window 7 but i do not want to loose my back up
View 1 Replies View RelatedMy old computer was getting old, so I went ahead and ordered new parts from Newegg. HAF 912 case, GTX 560 Ti, Phenom II x4 975, 8 gigs G.Skill (2 x 4) 1333 DDR3, and a Biostar A880G+ mATX motherboard, and Windows 7 Home Premium OEM (in case). I planned on using the same HDD from my old system in the new one, so I didn't order a new one. Well, I built it, everything went smooth, it POSTed with one beep and the BIOS was fine. However, when I tried to boot from my drive, it would give a System Error screen, with either Repair Computer (or something similar) and Start Windows Normally. If I click Repair Computer, it stays that way for upwards of 30 minutes, not doing a thing. If I start Windows normally, the logo flashes for a second or two and BSoD's real quick, and shuts down before I can even see anything. Then it restarts and goes to the System Error screen. Then, when I take my HDD and put it in my old system, it boots up same as is always does. That's how I'm typing here.
I've also tried changing the boot order so that the Windows 7 disc is first, but it just goes to Set Up, which is, I'm guessing, not what I want to happen.I'm hoping that it's a really simple mistake on my part, and that I messed up on something super easy, because I don't want to have to send back any parts.
Every time I have a update to Firefox I loose the tabs that I've pinned to the taskbar. Is there anyway to spot this happening?
View 9 Replies View Related