I have three computers. One is running Windows Vista Ultimate and the other 2 are running Vista Home Premium. Can I use the family pack to upgrade all three machines to Windows 7 Home Premium and then install the anytime upgrade to get the machine that was originally running Vista Ultimate up to Windows 7 Ultimate? If not, please suggest an alternate method.
I have a legitimate copy of Windows Vista with key codes etc and I have a legitimate upgrade disk for Windows 7. I had Windows 7 installed on a previous system build which had a HD crash and now I am starting again from scratch (wiyh backed up data).
Like a dolt, I installed Wondows 7 before I remembered it was an upgrade edition. I've looked all over the MS site and don't see a method I can use to Activate Windows 7 from this point. way to use my legitimate Windows disks and keys without having to wipe the drive, install Vista and then install Windows 7 yet again.
It's aggravating to have legitimate software and not be able to use it without needing to trick the system - surely there is a way to not have to start all over?
I am trying to upgrade from vista ultimate to 7 ultimate, I don't want to format, the only issue I am having upon upgrading is that there is not enough disc space on my drive to continue the upgrade.
So I'm trying to upgrade to Windows 7 64-bit. I boot it up, do the clean install, works like a charm for a while, restarts a couple times. And then it just goes blank when the username screen should load up. I've tried repairing the OS, reinstalling Vista and then reinstalling 7 again. I dunno what else to try at this point. I've tried it a couple times now and always does it
I am planning to upgrade Windows Vista Home to Windows 7 Professional. If my thinking is correct then I will have to do a clean install for Win 7 because I can't upgrade straight from Vista Home to Win 7 Professional. What I need to know is if I run the backup utility on Vista to backup my music, docs, pics, etc. if it will be restored into the correct folders in Win 7? (I've never done this type of install before).
so I'm upgrading from 32-bit Vista to Win 7 64-bit. I know I need to backup all my data and completely wipe my drive clean.My question is this, and it's probably an easy one to answer: I have two hard drives, one of which has the OS, the other obviously does not. I only have to wipe the drive that will have the OS on it, correct? Should I disconnect the 2nd hard drive while wiping/installing 7 just in case?
I upgraded my last OS(Win Vista Ultimate) to Win 7 Ultimate.
the BOSD contains following information:
inspect.sys DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS ... ... . . . Technical information: ***stop:0x000000CE(0x873AD79C,0x00000000,0x873AD79C,0x00000000) inspect.sys . . . I start it up in safe mode,and every thing which is appears after pressing F8,but this problem still LIVES!!!
Am I going to lose my vista CD key after upgrading to windows 7 because I heard from many people that I will not be able to use my vista CD key in case I wanted to return to windows vista?
My cousin owns Toshiba Satellite L305-S5937 Laptop.It has only two disk drives, C and D.Currently C has windows Vista.So I tried installing Windows 7 on D drive. The windows setup installed everything, restarted, it showed 'Preparing windows for the first time' and 'Checking video performance'. Welcome screen appeared.After that, it restarted again on the welcome screen, saying- logging off, windows is shutting down.This time when it started, beyond toshiba screen, it said:'BOOTMGR is compressed'.I never had such a problem with installing windows.Even vista wont work.So i booted from the disc again, thought of jumping onto vista again.Formatted the drive from windows installation disc, on which i installed windows 7.Restarted again.Still the problem is the same.BOOTMGR is compressed.
I've been told that it is possible to maintain all ones applications and settings when upgrading from XP to windows 7, if you first upgrade XP to Vista and then the Vista to Windows 7. Can anyone verify that? It would be more time consuming but given the amount of apps I have installed and need, it is the best choice in my view. I have an old Vista disc somewhere so there is no extra expense.
Is it possible to upgrade from windows vista 64 bit to windows 7 ultimate 32 bit? tried doing so.. got all the way through the setup and it restarted and the screen stayed black.
I have a HP Pavilion dv6000 laptop running Vista. I would like to upgrade it to run Windows 7. What is the benefit/downside to purchasing an upgrade from Vista to Windows 7 for the HP laptop vs purchasing a new Windows 7 license (other than cost)?
Have Acer Aspire Laptop With.Celeron 530, 1.73 Ghz, 2 GB DDR2, 80 gb 5400rpm HD.Plan to change the HD to 500GB 72 RPM and install Win 7.Windows Upgrade Advisor tells me I can either install the 32 or 64 bit. Any harm installing 64 bit one?How about installing the Ultimate edition?
I upgraded to Windows 7 64-bit from Vista Ultimate 64-bit.
While in Vista, I had automatic backups to an external drive. I cannot delete these old backups manually, and the Backup and Restore module does not recognize them as backups, so it won't manage them.
How can I delete these old backups. When I try to delete them, I get an "Access denied" error. I can't even open the folder with the name of the computer.
I have Windows vista 32-Bit service pack 2, and I am trying to upgrade to Windows 7 64-bit. I downloaded Windows 7 from my school, burned it to a DVD and when i click on Setup (Windows Installer) i get this message "C:UsersMarloneAppDataLocalMicrosoftWindowsBurnBurnsetup.exe,This version of this file is not compatible with the version of Windows you're running. Check our computer's system information to see whether you need an x86(32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
I recently upgraded from Vista to Windows 7 Home 64bit.My problem is that before I upgraded, my computer supported and I was running a resolution of 1920x1080.After the upgrade, the highest my resolution will go is 1280x1024.Is there anyway I could get back up to my MAX resolution?
Im upgrading my grandfather laptop to windows7 from vista.
we are getting W7HP from our uncle, he used it on his laptop, will i be able to use his W7 disc on the laptop im upgrading(my grandfathers), or will it not work since the W7HP has already been used on another laptop(my uncles)?
Also is it even possible to upgrade vista to W7? I heard it's do able but im not sure. ~I didn't know if this belonged here since the computer is windows vista or if it belonged in the W7 forum since im upgrading~
The reason on why i want to upgrade from a 32 bit to 64bit is because i have some extra ram that is not being used. Also i want my computer to be a little bit better when playing my games.
Processor : Intel Core 2 Quad CPU Q8200 @ 2.33GHz 2.34 GHz Memory(RAM) : 4.00 GB System type: 32-bit Operating system Graphics : NVIDIA GeForce G100 64-bit capable Yes Model : Aspire M5700
Having used the Microsoft upgrade advisor, I bought a download of Windows 7 Ultimate 32-bit. I created the ISO disk as advised and started the installation. The installation seems to go fine until the end when I get the message that upgrade was unsuccessful and Vista is being restored. No other message is given. Antivirus (Kaspersky) is turned off for the install. Its starting to drive me mad...
I have just upgraded my laptop from Vista to Windows 7 and need to install a couple of programmes, iTunes and printer drivers from a CD. Neither will allow installation, the iTunes download has been made but when I click on install it reads: 'The installer encountered errors..... Errors occurred during installation. Your system has not been modified.' When I insert the CD to install the drivers for my printer I get the message: 'Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.'
I have a Sony VAIO notebook, Model VGN-AR52DB, which I bought in Japan about 5 years ago. The computer has an Intel Core 2 CPU; T5500 @ 1.66 GHz; 2046 MB RAM; 32 bit OS; Direct X 10; Phoenix NoteBIOS 4.0, Release 6.1.I've never used the computer much, mainly because it runs Vista (Home Premium), which I don't like. The computer is still in great shape, so I was thinking of upgrading to Windows 7 (or maybe 8?).
The Microsoft website tells me that if I want to run Windows 7, I need a 1 GHz or faster 32-bit (x86) processor; 1 GB RAM; and DirectX 9 graphics device with WDDM 1.0 or higher driver.So it looks like the computer will handle Windows 7. Right? (But I'm not sure what the "WDDM 1.0" signifies....) My main question is this: Given the above-mentioned specs, would Windows 7 (either Home Premium or Professional) run alright on my Sony VAIO VGN-AR52DB? Also, for the new Windows 8, the minimum hardware requirements also appear to be IA-32 architecture; 1 GHz (with PAE, NX and SSE2 support) processor; 1 GB RAM; and DirectX 9 graphics device, again "with WDDM 1.0 or higher driver." Here, I'm not sure what the "with PAE, NX and SSE2 support" means.
Question #2: Would Windows 8 also run on my machine and, if so, would it be better to wait and get Windows 8, or just go with Windows 7?
Admittedly I feel a little late to the party with Windows 7 (what with 8 being on the horizon) but after several years (!) of plugging away with Vista Home Premium on my laptop (used every day for work), I'm at the point where I need to update it.Don't have the money to replace it outright, and it's also recently had a new HDD and RAM upgrade, so I'm exploring the possibility of finally upgrading to Win 7 (particularly seeing as mainstream support of Vista has now finished).From what I understand, a clean install of Win 7 is probably better than an update over Vista (and I am happy to do a clean install as I have all programs and everything backed up), but the one thing I am unsure of is whether I can jump to 64-bit Win 7 Professional with the hardware specs of my machine.The laptop is an Acer 5103WLMi with the following spec (from System Information): [code] The Windows 7 Upgrade Advisor report seems to indicate that upgrading to 64-bit is possible on a custom install, but the IT tech I spoke to at work says that because System Information lists the System Type as 'X86-based PC' that it can only use a 32-bit version of Windows.
I just recently upgraded to Windows 7 from Vista. Before upgrading, everything was fine. Now, I have a rather annoying sound problem. When I play anything that uses flash, the program will freeze up and have to be ended. After this point, the sound on my computer is completely gone until I restart the system. Additionally, I cannot access the volume control panel or anything that deals with the sound settings after this particular event occurs. I've been doing a little bit of research, and it sounds like the IDT sound codec is the problem. I followed the instructions on this link to a point. Fixing Flash Crashes after Windows 7 Upgrade: IDT Sound Codec Conflicts with Flash Drivers Causing Crashes |[URL] Here are the instructions that it gives: Disabling Software at Boot:
Click on the Start button, and then click 'Run...'In the Run window, type msconfig and click 'OK'.Go to the 'Startup' tab and locate the Startup Item named IDT PC Audio by IDT, Inc.Uncheck the IDT PC Audio item.Click 'Apply', and then click 'OK'.Reboot the laptop for the change to take effect. Disabling Enhancements:Click on the Start button, then click Control Panel, and click 'Sound' from the context menu.Highlight 'Speakers / Headphones' from the list of playback devices, then click on the 'Properties' button.Go to the 'Enhancements' tab, and check the checkbox labeled 'Disable all enhancements'.Click 'Apply', and then click 'OK'.Highlight 'Independent (R.T.C.) Headphones' from the list of playback devices, then click on the 'Properties' button.Go to the 'Effects' tab, and check the checkbox labels 'Disable System Effects'.Click 'Apply', and then click 'OK'.Click 'OK'.
My problem with following these instructions is that I do not have 'Independent (R.T.C.) Headphones' in the list of playback devices. The four playback devices that I have listed are 'Digital Output Device (HDMI)', 'Speakers and Dual Headphones','Independent Dual Headphones' and 'SPDIF (Digital Out via HP Dock)'. That being the case, I cannot disable the last portion of the IDT sound codec. As a result, my problem persists. I was wondering if anyone knows how to get around this. Would it be wise to just uninstall the idt sound codec altogether? My computer is the HP Pavillion dv7-2185dx Entertainment Notebook PC?
The windows 7 Home premium 64-bit currently installed is upgraded from vista. The upgrade key and disk are available as well as in the HD. The current goal is to upgrade from an Q8300 to a i5-2500K, with the appropriate mobo (asus P8P67 M-Pro) and ram (8gb ddr3 g.skill 1333), what are the necessary steps/advice when doing so w/o purchasing a new OS?
I purchased an HP laptop running Vista just when Windows 7 was coming out. It included a coupon to upgrade to Windows 7. I ordered the upgrade disks.I finally ran the upgrade to Windows 7 including performing the suggested backup of all my files on a separate hard drive. The instructions indicated that I would be saving my email and contacts that was a part of Windows Mail. Now that I am running Win 7, I don't have access to Windows Mail and I don't know where my email files might reside.What can I do now to gain access to my old emails and contracts?
I am trying to go from 32 bit Vista to 64 bit Windows 7. The 32 bit Vista was installed by mistake. My system can handle a 64 bit OS. Now I have finally found the time to upgrade. But the 64 bit installation DVD can't be read from my OS. I have tried setting up my CMOS so that I can boot from the DVD but I have run into some issues. First of all, when I look at my keyboard during the boot procedure, I noticed that the little light which indicates that one row of buttons are to be used for F1 - F12 keys, the little green led light goes on and off. Sometimes, during the boot process, it is on, sometimes it is off.
The CMOS procedure tells me I can hit F12 and set the boot order. I can hit F12 but when I go into that menu, I notice my keyboard is dead. The CPU does not accept any commands from me. So I need to power off and power on and try again. The CMOS procedure tells me I can hit DEL and that launches the whole CMOS utility. There I can set the boot order so that the DVD is run first. But when I save and exit, I notice my keyboard is dead again. This time, the screen is showing things being set and loaded and I am prompted to hit any key to show I am sure that I want to boot from the DVD.
I hit the Y key and I hit the spacebar, but it becomes clear that my input is ignored since my keyboard is being ignored. And the ol' Vista OS is loaded. Is there any way to set things up in the VISTA OS to force a boot from the DVD? I guess I can load the OS in save mode and format the C drive, but if I do that I might risk having a dead computer since the CMOS does not seem to be trusting enough to boot from the DVD drive even if you tell it to.
Microsoft has this page of links: [URL] And then there is this link: [URL]
And the Notes section specifies that I need boot off the DVD drive: "To install a 64-bit version of Windows 7 on a computer running a 32-bit version of Windows, you'll need to start, or boot, your computer using a 64-bit Windows 7 installation disc or files."
Home networks are more and more popular these days and making your home computers work together can be a challenge. While having only computers with Windows 7 installed can make your home networking life extremely easy, I'm sure many have older computers with older operating systems installed. In this article, I will continue our networking series and show how to share files and folders between Windows Vista and Windows 7 based computers. As you'll see, it's not that hard to make them work together.
I'm trying to ugrade from Vista to Widows 7 but keep getting the follwing message: [code] The following issues are preventing Windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue.Windows needs to be restarted so necessary changes to system files can be made before continuing.These programs might not work properly after the upgrade. We recommend uninstalling these programs before upgrading. Cancel the upgrade, open Control Panel, and search for "uninstall a program". (Note: Programs marked as * can be safely reinstalled after the upgrade.) iTunes (Please deauthorize computer prior to upgrade)I have already deauthorised it but it continues to come up.
I'm upgrading from Vista Home Premium (64-bit) to Windows 7 Home Premium (64-bit) and I think it is almost done (the last step I remember was the last one on the list). However, when it restarted, the screen is now changing from red to bright green, to blue, to gray, darker gray, gradient white/gray, black, and repeat. Is it supposed to do this? It seems like the hard drive is still active as the indicator light flickers, but I haven't seen any tutorial that mentions this happening. It kind of looks like the colors are being tested or something but it's been going on for maybe 20 minutes now?
I just upgraded a 32 bit windows vista Sony Vaio to 64 bit windows 7, but all the shortcuts and original programs (accessories, dvd writers, etc.) installed by Sony are gone. Would like to know how to get these programs back. I had try to use the disc that came with the computer but it actually wipe out windows 7 and reinstall windows vista back onto the computer.