USB Ports Randomly Freeze?
Aug 30, 2012
USB ports keep freezing - Mostly my mouse and sometimes my keyboard keep freezing - at least 2 times per hour.Sometimes the whole system freezes and I need to unplug the power to reboot.I often hear the bebop sounds of a usb port responding to input/removal of a device Sometimes when it freezes it recuperates after 1 minute and system gives message in system tray that my usb device has been installed successfully.Sometimes if I switch the device to a different usb port, it works.I have tried updateing drivers and windows in general,uninstalling the usb ports, set power mangement to disable turnning off device....
View 1 Replies
ADVERTISEMENT
Jan 14, 2013
I recently got a new power supply and video card for my computer. It has been working great but on accident one day I broke the plastic divider inside one of my usb ports so that one no longer worked and now my other usb port is not working. It will not recognize anything plugged into it and my phone can't even charge through it. It did the same thing a few days ago but it randomly started working again but now it isn't and I don't know how to get it back or make it stop. The usb ports on the back of the pc are still working though, my keyboard and mouse are plugged in through it and haven't stopped working once.
View 3 Replies
View Related
Aug 7, 2012
i am having problems with windows7 freeze randomly.i want to use windows 7 .due to rapid hang of pc i change os to xp.my system configuration is: OS Version:
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+, x86 Family 15 Model 107 Stepping 2
Processor Count: 2
RAM: 3199 Mb
Graphics Card: NVIDIA GeForce GTX 550 Ti, 1024 Mb
Hard Drives: C: Total - 60000 MB, Free - 39933 MB; D: Total - 177999 MB, Free - 150447 MB;
Motherboard: Gigabyte Technology Co., Ltd., M61PME-S2
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled.
View 14 Replies
View Related
Nov 6, 2011
i'm having a problem with a Acer Aspire 5378G. It freezes random so if your doing something like chatting, if it freezes the screen it just hangs I can't move my mouse pointer even shift lock, num lock doesn't work anymore on the keyboard when it freezes so it's completly unresponsive ! i'm having this problem for a long time now and i sended the laptop to Acer 4 times and they said there was nothing wrong (but they changed the ram sticks) but that didn't fix the issue.
View 9 Replies
View Related
Jan 25, 2012
My computer will randomly freeze, or the screen will go black and I can not do anything except a reboot.My Pc is custom built (nothing is overclocked)Specs:Windows 7 Pro x64ASUS M4A89GTD/PRO USB3.0AMD PhenomII x6 1075T2x WD Caviar blue 250Gg HDD in RAID 0EVGA NVIDIA GTS 4508Gb DDR3 1600 G.Skill RipjawsMy PC got replacement RAM 2 weeks ago. This problem has been going before the RAM replacement too.First, the symptoms:The PC will run in standard mode, but it just locks up at any given time. My PC has not been running for a full 24 hours without freezing up since this all started about 2 weeks ago. I had my browser open listening to Pandora, suddenly the PC froze and the sound made a constant buzzing until I rebooted it. It led me to think the audio driver was bad, so I re-installed the Realtek audio driver (which I've heard can cause issues) and it still froze up. I re-installed Windows last week, because these problems were still occurring, but the re-install did not fix it.
Conclusion:While in safe mode, or booted from a live Linux flash drive, my PC has no problems running. This leads me to think I have a driver issue in Windows somewhere. I went to the ASUS website and downloaded the most recent drivers, (except the BIOS, which could be an issue, but I've seen PC's seriously screwed over when a bios update goes wrong. So I've been trying to avoid that) and installed them, but still, no luck.Sometimes my PC will even do a CHKDSK upon reboot, so could it be a RAID 0 issue?
View 9 Replies
View Related
Aug 20, 2012
i have already had issues before with this brand new machine, mainly BSOD's which i solved by replacing usb drivers from 32 to 64bit corresponding to my Windows 7 version, i use this pc mainly as a DAW for music production (fruity loops/ableton live), besides usb mouse/keyboard (microsoft standard) i only have virus ti 2 synth connected through usb and using it as both midi keyboard and soundcard, lately im experiencing freezes with do NOT result in a bsod later on, i just have to physically restart or shutdown. couldnt find anything on the event viewer or any other acceptable way of finding issues, attached the SF diag collected files.
View 7 Replies
View Related
Oct 13, 2009
I just recently put my computer together, and it would randomly freezes. im not sure if it is hardware or window 7, but when it would freeze fairly frequent. at least everyday. i dont know if its overheating hardware or window 7 please help, or if the psu is not giving enough power.
View 4 Replies
View Related
Jun 11, 2012
The last couple of weeks I've been having this issue where my computer will freeze/lock-up hard. And by hard I mean that I can't launch the Task Manager, move the mouse cursor, or anything...it's completely unresponsive. To get the machine working again I have to physically restart it using the Power button or the Reset button. I initially thought that it was overheating, so I opened up the case and gave it a good cleaning with a compressed air duster and verified that the fans worked properly. No dice. I then reformatted and reinstalled Windows. Again, no luck...the issue just keeps happening. I ran MemTest overnight, and that came through clean. I haven't found any issues from Disk Check, and MSE comes back with a clean report. Here are my system specs:
Windows 7 Professional x64, Retail
Core2 Quad Q6600 @ 2.4GHz
Asus P5K SE/EPU
6 GB RAM
nVidia Geforce 9800 GT
2x 500 GB HD, 1x 320 GB HD
Last, but not least, I ran a System Health Report that's attached to this post. I took a look through it, and I'm a little confused by some of the errors it found. Namely, I don't have a PS/2 keyboard; my printer is working just fine; I've uninstalled LogMeIn, and I have MSE installed. The Health Report seems to be..
View 8 Replies
View Related
Apr 19, 2012
My system seems to randomly freeze once every couple of weeks, but has done so twice today and cost me some work so I thought I'd try and resolve it.The freeze occurs with the open browser becoming unresponsive to mouse or keyboard. I can still activate already open browsers from the hot bar but they're also unresponsive. Mouse still moves and if I have an application open already (today it was the calculator) that will be responsive to both mouse and keyboard, I was able to do sums still. That then becomes unresponsive after a minute or so. Hot keys don't work, like alt-tab or ctrl-alt-delete. Windows start button still opens up to menu, but applications won't open from there. All are unresponsive.Hard reset and Windows boots with no problems, everything working again. [code]
View 1 Replies
View Related
Mar 7, 2012
it freeze totally at random, i cant move my mouse or do anything.
View 9 Replies
View Related
Aug 9, 2011
A few days ago I installed a USB 3.0 card (to be precise, this one: 2-Port USB 3.0 SuperSpeed PCI-E Controller Card - Free Shipping - DealExtreme). It uses the very common NEC PD720200 USB 3.0 controller. I installed the required drivers for Windows 7, and the card worked fine for the first day or so. but not since. Whenever I plug in a USB 3.0 external hard drive, I get a false "This device can perform faster..." message, as if I had plugged the drive in a USB 2.0 port.
The external drive I am using is a Western Digital MyBook Essential 1130. It is definitely a USB 3.0 drive, and came with the required USB 3.0 cable. While the USB 3.0 card was working, I got full-speed transfers to the limit of the hard drive's ability, about 90-100 MB/s. Now I can only get USB 2.0 speeds (33-34 MB/s). Windows insists I have the drive plugged into a USB 2.0 port even though it is plugged directly into the USB 3.0 card.
Things I tried so far: -rebooting and complete power cycle. No difference. -plugging the drive into one port or the other. Also no difference. -Looked in Device manager.The controller is recognized as a USB 3.0 device is using the proper NEC drivers.
Other info that may be important:
-No overclocking settings in use.
-I made sure the cable was plugged in all the way. It's in as far as it can go, but the ports will still only act like USB 2.0 ports.
I might as well throw the card away if it is only going to act as a USB 2.0 device.
View 4 Replies
View Related
Jul 13, 2011
Im having screen freezes every couple of days. My whole computer just freeze what its doing.Been
-on word
-on a game
-watching movies
-transfering data
So no specifi thing sets it off.Cant alt-cnt-delete.Its like a screen shot of my computer and watching a picture. Cant even move the mouse.My keyboard can change colours via buttons on it (logitech g110). I cant even change the colours coz its like the whole pc is in a time freeze..Due to this i dont get an "windows had an unexpected error" message when i restart the computer...
View 2 Replies
View Related
Jun 30, 2012
my pc has been acting weird lately, it has began randomly crashing frequently. I turn it on and after 3 or so minutes of random activity it just freezes or gives me a blue screen error. Sometimes while playing BF3, it freezes.[CODE]
View 3 Replies
View Related
Mar 7, 2012
When the PC is on it will depending on how long its been on will randomy just shut off. When it shuts off, it "sometimes" reboots but most often it "tries" to reboot but fails and then stays off. After this failed try to reboot if I press the power button on the case and mobo, nothing.Now if I turn OFF the PSU leave it for a few minutes and come back turn the PSU switch on and press the power button the system comes to life for a second or two then dies and will no respond to the power buttons until I turn off the PSU again.I have gotten it up and running from this state by leaving it off and unplugged for a couple of hours. When I say the PC comes to life for a second or two, I mean the case fans. If I get it booted up the BIOS is reset to default for some reason. Also if it makes it to windows, the notification area icons also gets reset... very very odd.I have a short video of the problem, sorry for the darkness, I finally decided to video it and it was 11pm.PSU dying or Mobo. I dont have extra's so I cant test them.Forgot to mention, ive checked for heat problems but none of my temps are high, they are all normal and its a Antec 1200 with tons of air movement.Event Viewer shows nothing expect for unexpected shutdown. My event viewer is clean from any errors also. I do not get any BSOD and this is on a fresh Windows 7 install from late Jan.
View 8 Replies
View Related
Apr 26, 2011
I recently bought a USB to RS232 adapter (it works fine). My question is: How can find out which com port it is using, except by trying all of them and then finding the one that works. I have a older Thunderbird GPS 10 MHz frequency standard thet requires a RS232 interface to talk to it (for setup purposes). The first thing it askes me is which com port I'm using(1-16).
View 8 Replies
View Related
Nov 25, 2009
My USB ports on this Gigabyte mobo are SUPPOSED to be all USB2.0
So, how come I still get "This device can run faster" messages in
my Windows 7 64 bit home premium installation?? I went to Gigabytes webpage and installed the chipset drivers for Windows 7 on there, but still get the same message when I plug in my Corsair 4GB jumpdrive.
View 6 Replies
View Related
Nov 5, 2009
First a little background:
System - Dell Inspiron 546, Windows 7 Home Premium x86 64 bit.
I'm an Engineer/Designer/Machinist and work with CAD/CAM programming. After I create the programs with the toolpaths for my CNC Macining Center I use a separate program to transfer the machine control data to the CNC.
Here is my dilemma - Win 7 is not compatable with the old 16 or 32 bit, file transfer program I had been using with XP and Vista. I have found 64 bit programs that are compatible but cannot get the computer and CNC to communicate.
The problem I'm having is, in the file transfer software I need to set the Parameters such a Comm Port, Baud Rate, etc. I cannot determine the port assignment for the usb connections. In XP and Vista they were Comm 4 and I could find that in Device Manager/Ports. Win 7 doesn't seem to have a listing for ports. How do I determine this.
View 2 Replies
View Related
May 12, 2012
I have five USB 2.0 hub successfully operating over 20 devices. As these fail I will upgrade to 3.0. Anticipating more 3.0 devices and a 3.0 motherboard in the future. Why do they only have four ports? If I am mixing 2.0 hub with 3.0 hub's should I plug in. In a certain order
View 2 Replies
View Related
Sep 28, 2011
So I installed some weird file and it like disabled ALL of my USB ports, hwo can I get them to work again?! Both my keyboard and mouse are USB and I don't have any regular ones, any way I can fix this through my 2nd partition using WinXP? im using the Win XP partition to ask this right now, my Win7 partition seems to run fine like when it happened I thought it froze but it didn't because the wifi signal went off from my USB wireless adapter and my mouse+keyboard adapter both light off as well as my DVC 80 capture device. The file I ran was 'libusb-win32-filter-bin-0.1.12.2.exe' from a package I downloaded in a zip called 'iHackintosh iRecovery Package for Windows & Mac' and I REALLY DONT want to restart my computer
View 1 Replies
View Related
Jan 21, 2011
I restarted my computer to return to the login screen and found i have no control of my mouse or keyboard.I have control before Windows loads (in Bios Settings).I have enabled and disabled in every combination possible for the settings of the USB in Bios Settings.I can not system restore. I have no control in safe mode.Basically if it deals with windows, i have no control. Only before windows loads.
View 3 Replies
View Related
May 10, 2011
I noticed recently that for some reason,my USB ports aren't being identified as 2.0 ports, but I know they are. My computer is an ASUS CG5270, Specs: Core 2 Quad @ 2.4 GHZ,8 gigs ram, 750GB hard drive. I tried going into the device manager and uninstalling everything under "USB", and then restarting and replugging everything in..no luck. I found some Fix for Windows 7 SP1...no luck. Whenever I go into the Device Manager, there are two ports ( I think they're ports) listed as "Enhanced", with the rest as "Universal". I keep getting errors when I plug in my external HD that "this device could perform faster". (I also get another message telling me that the drive needs to be formatted, but it works anyway). I also get a "this device could perform faster" with my webcam, as well...
View 9 Replies
View Related
Jan 12, 2013
When I plug a USB device into my laptop it doesn't recognize it Shown Here: Rec008.avi - download now for free. File sharing. Software file sharing. Free file hosting. File upload.
View 1 Replies
View Related
Jan 9, 2009
first of all i would like to excuse for my rusty english... passed some time since i last wrote something completely in english ;-)
i'm using the x86 version of build 7000 and i'm very fascinated of how it works already in this beta-stage. but i have a strange crashing-issue from time to time that does not allow me further testing.
from time to time all of my usb-ports seem to block everything: my usb-soundcard stops working, my wireless-adapter, my external hd, everything that's plugged-in into an usb-port stops working.
it happens when i'm using my soundcard, videocard or both of them: playing games, watching dvds, browsing Internet, listening to music, etc.
when i'm trying to reboot, the os will stuck in the logging-off-screen 'cause it's trying to play the logoff-sound over my soundcard..
View 9 Replies
View Related
Nov 7, 2010
On my Dell Vostro laptop, Up until today I never had a problem but now when I plug in my energy monitor to a USB port I do.. I have a mouse plugged in one port. If I plug in my energy monitor into any of the other 3 USB ports it installs a USB to serial port at the next higher com number. Its up to com 18 now. If I unplug and replug it in again it will find USB to serial com 19. It just keeps going up. How can I reset it back to 3 or 4.
View 2 Replies
View Related
Jan 18, 2012
I want to disable some of the USB ports in my W7U-64bit Ultimate system.Normally I do this by viewing in HWINFO64.The after in DeviceManager to uninstall the wanted USB ports.But now I cannot see the adresses in HWINFO64 nor in DM.
View 5 Replies
View Related
Apr 21, 2012
as soon as i connect anything to the usb port, i get the message "usb device not recognised". i have tried to go back to various restore points but these all fail to complete.
View 2 Replies
View Related
Jul 3, 2012
I am not going to tell my problem or trouble but rather to tell what I had done based on what I found out from other responses to "related issues" subjected above.I just thought that I must do this for the sake of others, brothers and sisters in Jesus Christ wanted to go back to the threads that his but I am not that fond of using the search fields and somehow my google search results on this lappy is quite differ from the one i got on the usb-troubled lappy that i used to log into sevenforums. i have read through just about 10 of the related result on sevenforums but not one of them is the one i found out earlier.anyways, what i did was: uninstalled all usb listings in device manager and then just shut down the lappy, unplug all cables including power cable and went out for a smoke. a few minutes later, came back and plugged the power cord and turned on the lappy. and somehow, windows auto-install everything and since the lappy is wirelessly connected to the internet like always, it also download and install everything.then i plug the main cause of the problem (microsoft 5-button intelligent mouse) and wait for the driver update wizard to complete; and now everything not only seems working fine, BUT actually working fine now.
View 1 Replies
View Related
Mar 1, 2011
I cant open my ports. My router has DMZ enabled and I have disabled windows 7 firewall and disabled the firewall in ESET Smart Security 4. PORTS STILL WONT OPEN!
Im trying to open 55550-55560
View 4 Replies
View Related
Mar 15, 2011
I am running windows 7 ultimate x64after booting the pc and without visiting any website when I scan my machine localhost using command nmap -sT -O localhost[CODE]
View 6 Replies
View Related
Oct 11, 2009
I just installed Windows 7 tonight and thus have moved from the Vista forums to here
But of course if everything were going smoothly I wouldn't be here. Now here's my problem, I'm trying to open ports for some of my programs but I havn't been able to. I've done it many times before in Vista with no trouble. I've tried disabling the firewall to see if that worked but it didn't.
Now here's where it gets weird. When I was in Vista I'd use Open Port Check Tool to check if my ports were opened correctly, it always worked. But now when I try it it tells me that my ports are closed, even basic ports like 80 and 21 keep getting:
Error: I could not see your service on 76.68.106.153 on port (80)
Reason: Connection timed out
View 5 Replies
View Related
Dec 6, 2009
is there a program that can show me the exact ports that an aplication or all the aplications on my computer use, or is there another way to get the information.
View 1 Replies
View Related
