USB Wireless Get Disconnected
Sep 22, 2009
I managed to install USB wireless adapter (Airties WUS-300) successfully into Windows 7 RC and it works great, but there is a problem.
Whenever I safely remove my ThumbDrive or mobile HDD from any of the USB ports, the USB wireless adapter would lost wireless connection. I have the exact hardware setup but I don't face this issue using Windows XP.
I've tried numerous workarounds and still no luck.
This problem is very annoying and driving me crazy. What could be the issue?
Can any gurus advice?
View 5 Replies
ADVERTISEMENT
Feb 22, 2012
I disconnected my printer from my laptop in order to take it to the other room wirelessly. When I needed to print something, I went back & plugged in my printer, But for some reason my laptop isn't communicating with my printer? Laptop: Asus G60JX.Printer: Epson Stylus R800 Photo.I also went to epson's web site & re-downloaded the driver to no avail.
View 2 Replies
View Related
May 21, 2011
I set up a dual boot of Ubuntu and Windows 7 on my lenovo u330 laptop a couple months ago and everything was working fine. That was till I found a problem with the wireless when switching from Ubuntu over to 7. I found that if I left the wireless off in Ubuntu and restart to 7, the wireless is completely disconnected in 7. Later I learned that if I enabled the wireless in Ubuntu and restart into 7, the wireless works fine. Now, the major problem is that the Ubuntu 11.04 update completely screwed the Ubuntu installation. The graphics nor the internet worked after the update so basically I'm stuck with the wireless off in Windows 7.
Also, I deleted the Ubuntu partition to possibly reinstall it but another problem is that I got the install from a friend (who isn't around). Someone told me that Ubuntu actually shuts down the wireless card at the hardware level. Any low level way of enabling the wireless adapter in Windows 7? ipconfig gives me the "Media disconnected" message on all of the adapter connections. I have already tried reinstalling wireless drivers as well and none of the Windows 7 troubleshooting apps work whatsoever.
View 6 Replies
View Related
Oct 28, 2012
I'm having a problem with the mouse and the keyboard (both usb). The problem is that sometimes (randomly) they get disconnected and when I try to unplug and plug in they dont work, even I change the usb port, but they still without working.Windows says (when i reconnect them) that it doesnt recognize them.
View 10 Replies
View Related
Oct 28, 2009
This is the story. I upgraded to Win 7 from Vista on two computers and in one of them the network kept getting disconnected. So I got a new network adapter from the compatible list and tried. It kept happening. It worked fine for a while and then it just lost the network. The computer was also freezing and crashing and never shutting down, so I decided to do a clean install.
It's not freezing as much it still does, and the shutting down takes forever if it happens at all, and I keep loosing the connection to the network.
View 1 Replies
View Related
Jan 2, 2012
i am using blackberry playbook and when i connect my playbook with my laptop it is successfully installing the blackberry driver require for transferring data.but when i want to transfer data to my playbook i am getting message that disconnected from computer in my playbook. insta[b]Note : same playbook when i am using in my friends laptop it is working fine and i am able to transfer files i have unchecked the option present in the power management .but after the reboot it is again getting ticked...
View 1 Replies
View Related
Jan 11, 2011
From all my research this doesn't look possible, but I thought I would ask anyway.Environment:- Windows domain environment - 2 2008 R2 AD servers, 1 2003 AD server, 2003 functional level for now- Mostly XP machines, new medical tablets and all-in-one pcs will have windows 7 32-bitIs there a way to auto log off disconnected client user sessions in windows 7? I know there is a way to log off disconnected sessions in terminal services using an idle timer, but from everything I've read you can't do this on a client. I found Grim's screen saver log off solution here and it works if no one uses the fast user switching ability. My problem is that the medical tablets probably will not sit long enough for the auto log off to kick in. A user will come by pick up a machine that the last user didn't log off (and never will, even if I tell them they will lose their jobs if they don't!) and do a switch user function, leaving a disconnected session. This will probably happen multiple times, leaving many disconnected sessions and a slow device. I would disable fast user switching, but our single sign on software must have fast user switching enabled in order to function properly. So much so that it overrides group policy and registry edits.
View 8 Replies
View Related
Jul 26, 2011
I have a laptop w/Windows 7, we also have 2 other laptops using 7 and one using XP. We are constantly getting disconnected from our wireless internet. Sometimes it will show that it's connected but then show "no internet access". We also have a Wii, PS3, 2 iTouches and 2 iPhones. Could we be overloading our wireless router? It probably happens at least 2 times a day. We are always having to unplug router and modem and starting over. I've reset the router several times but still have same issue.
View 8 Replies
View Related
Jan 14, 2012
Tried ipconfig but it says cannot complete any operation while WLAN media is disconnected. Tries ipconfig /release, renew. Still nothing.
View 3 Replies
View Related
Sep 5, 2012
Why my internet is showing disconnected but isn't?
View 1 Replies
View Related
May 16, 2010
I have an HP G60 laptop with preloaded Windows 7 Home Premium. The OS has been fully patched till date, and guaranteed to have no viruses. I have MS Security Essentials and Super Anti Spy-ware installed and working. Lately I notice that each time I close the cover and open it back the OS resumes all right but the internet connection is lost. No amount of trouble shooting through Windows helps. Of course rebooting solves the problem. My internet connection is through a Scientific Atlanta cable modem connected through the LAN connector, and so requires no drivers.
View 7 Replies
View Related
Dec 18, 2012
Recently I installed a SSD and was happy with the speed.Boot takes about 14 seconds.I have another 2 HDD.one is Hitachi 1TB 7200 and another one is a Seagate Barracuda 7200.12 750GB HDD.So yesterday,i tried disconnect my Hitachi HDD and boot up my PC.My boot up time is way more faster about 8 seconds and even the windows flag haven't finished.
View 9 Replies
View Related
Apr 25, 2009
How do I enable viewing of disconnected devices in the Device Manager?I have like 30 WiFi cards installed that I need to remove.
View 8 Replies
View Related
Jun 17, 2012
I disconnected my wired internet on my pc by right clicking on the internet icon down on the right toolbar and therefrom i disconnected. Right now I can't connect it back. I've tried unplugg and plugg it in (not working) and restarting the pc (again, not working).
View 2 Replies
View Related
Mar 8, 2011
In windows 7 , i can't disconnect my network mapped path. when i tried to disconnect , it gives an alert "network connection does not exists". even i tried to connect i can't create for the same drive.
View 3 Replies
View Related
Apr 11, 2012
I am having a problem connecting using an Ethernet cord to the internet. It was working fine a couple days ago, then all the sudden stopped. I don't think I did anything different. Ran ipconfig, which is below. Have uninstalled/installed the network driver, looked up other fixes (reset the TCP/IP stack) but nothing has worked.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:windowssystem32>ipconfig
Windows IP Configuration .........
View 14 Replies
View Related
Jan 9, 2013
i am connected to the internet but suddenly the yellow icon apprears and i get disconnected and then have to disconnect the wi-fi again and connect it back. Then it starts workin.
View 14 Replies
View Related
Mar 26, 2011
I have just built a system running:Asus p8p67 motherboardIntel i5 2500kAti 6850 graphics carWindows 7 ultimate x648gb ddr3 1333My issue is, after removing my sata optical drive, the computer blue screens at windows loading screen and restarts. If I connect the optical drive back in, everything works fine.I have tested this several times and its always the same scenario.Both my sata3 hdd and normal sata optical drive are connected to the 6G/b ports on the motherboard.I have installed the latest videocard drivers and all my mboard drivers are installed
View 1 Replies
View Related
May 8, 2011
I have a dell inspiron 15 with wireless modem of ITI make supplied by my ISP (BSNL India) running windows 7.While browsing internet normally, suddenly the data transfer stops. Important thing is that ping to google goes through. But i can't browse or download.I have tried following things -
1. disabling eset smart security temporarily - both antivirus and firewall
2. Disable-Enable wireless adapter form network settings
3. Checked for any suspicious process in task manager tried stopping a few unneeded
View 3 Replies
View Related
Jun 14, 2011
I've been wondering if Windows 7 has capabilities to trigger sound alarm when the network connection icon in the bottom right corner changes due to internet/network disconnection. I guess, in theory, Task Scheduler should come in handy, but first, the correct Event ID for the above-mentioned change needs to be determined. I couldn't find it yet. I found a standalone program NetSNSOR that can trigger alarm. However, a built-in process would be more useful.
View 1 Replies
View Related
Apr 15, 2012
I have a problem with connecting to my modem. When I plug it in to computer I've got "Unidentified network" and no network access, when troubleshoot: "Local Area Connection doesn't have valid ip configuration", then when ipconfig /all: there is no default dns, and when trying to /renew cant do anything cause "media disconnected". Modem type is Netopia 3341-ENT...
View 9 Replies
View Related
Feb 22, 2012
I've discovered an odd issue with my computer. When there is no internet connection, it goes extremely slow. Simple programs such as VLC and ACDSee took something like 10 seconds to open. These programs are also installed on an SSD which makes these figures even worse than they would normally seem. Anyway I figured it was an issue I could fix with a reboot, however when windows was starting up, at the point where the desktop would finally appear, black screen. I can ctrl+alt+del to open task manager and I could see that there were 6 processes open, and nothing else was continuing to load. Safe mode with networking suffered the same problems.
At some point I disconnect the computer from the router, intuition I guess, and viola! Everything starts loading fine within 10s of disconnecting it from the router. I restarted multiple times with it disconnected, connected, disconnecting after few mins of black screen to confirm that it was the issue, and it indeed is. Same thing happened with Safemode with networking. Disabling the NIC seems to fix the issue as well. And of course when the internet came back on, it works perfectly fine.
View 4 Replies
View Related
Nov 27, 2012
I have the TP-Link USB Wireless adapeter (TL-WN722N) It always reconnects after sleep mode or I have to do it manually and it takes a long time to reconnects all the time?
***DO NOT say to uncheck " Allow the computer to turn off this device to save power" option! This DOES NOT work for me and it has no effect whatsoever!***
View 3 Replies
View Related
Feb 6, 2012
This BSOD has been happening more regularly, sometimes after 30mins, other times after a couple of hours.If I try and restart it crashes shortly after Win 7 logo appears.Unless I disconnect the power for at least 15mins, it won't restart Windows - just re crashes.Have attached the dump and sysdata files - note that the two files are not always written.
View 4 Replies
View Related
Mar 4, 2012
no it doesnt make a difference whether the new drive is connected or disconnected , same problem
View 1 Replies
View Related
Feb 14, 2011
Windows 7 Prof 32 bit, with Office 2003 SP3 on a Dell laptop. Everything works fine when on the network and connected. If the user takes the laptop offsite without shutting it down first and still has mapped drives when he tries to save a document the drop down menu will hang any Office app.To explain a bit more... in the Save As dialog box, the drop down menu to change locations it was freezes it up. After about 30 seconds or so the menu will finally appear and the application will be happy again. The user doesn't have that kind of patience though.This isn't a new issue, I've found its due to the mapped network drives being unreachable. I do not have this problem in XP, only Windows 7. This is very annoying to the user. Short of removing the mapped drives with a script that the users has to run when they leave the office what can I do? I've looked around the web a lot and can't find much more than "disconnect the mapped drives" and I dont think of that as a solution so much as a work around.
The user is the CEO of the company I work for and he often uses his laptop at home, then gets in the car and uses it on his way to the office (obviously he isn't driving himself) and then gets into the office and wants his drives to just magically workAlso, trying to change how he uses the laptop won't work either. This is not a tech savvy user. This user also resist change (obviously, still using Office 2003)
View 6 Replies
View Related
Oct 21, 2011
I have an iPhone 4 which has internet tethering. I can either connect this via the USB cable or wirelessly via my intel 6300N wifi card.
When I connect to my laptop via USB cable, the 'Set Network Location' box comes up, which I select Home Network. It is simply named 'Network', but I then go in and change 'Network' to 'iPhone'. This then shows up in the Network and Sharing Centre as iPhone on a Home Network. This works perfectly, is super fast and when I'm finished, I disconnect the USB and shut down.
When I next turn on my laptop and connect my iPhone internet tether via USB cable, I am once again asked to ''Select a location for the 'Network' network''. Windows 7 netwkr and Sharing centre isn't recognising the same iPhone is connected and asks me to set up a home network again.
I've gone into 'Merge or delete network locations' and the original 'iPhone home network' is set up (not in use) as well as the new 'Network' location that it's asking me to set up. If I merge the second 'Network' and original 'iPhone network', this removes the second network and I'm left with the 'iPhone Home network (in use).
If I disconnect the iPhone and reconnect, it asks me each time to select a network location for the 'network' network. If I don't merge them, I end up with Network 2, Network 3, Network 4 etc all the while still having the original iPhone network not in use as well as any other not merged or deleted.
Why won't it recognise the same iPhone as being connected and selecting the iphone home network that I set up and why does it keep asking me to create a new one whenever I connect?
This never happened before, with my laptop previously recognising the iPhone home network I originally created ages ago. There has been no significant updates or changes that I'm aware of, except that I updated my iPhone software, bt this has been done in the past numerous times with previous iPhone updates and hasn't happened before.
I have a Virgin wireless broadband usb modem, which the system recognises each time I connect it. It's only the iPhone connection that's not saving. The iPhone network is 'unmanaged' but so is the Virgin Broadband USB.
I have a Pioneer Dreambook P170HMx running Windows 7pro x64. If there's any other details you need, I'm happy to supply them. All I want is my system to save the network configuration and recognise when I connect the iPhone tethering that it's an already created iPhone Home Network.
View 9 Replies
View Related
Apr 23, 2012
Yesterday I disconnected a useless usb socket and ever since i am getting the message failed to boot when switching the pc on, I have tried taking out the bios battery and left it out for more than 5 minutes, I have tried my windows install disk and tried repair from that but issue still exists. I am running windows 7ultimate 32 bit, and the bios is phoneix, that's all I know.
View 2 Replies
View Related
Oct 18, 2012
I was on my laptop, connected to the Internet, going about as normal. My Wifi Internet went out completely and then would not reconnect. When I tried plugging directly in to our modem, it came up with error 633. It seems like one of my programs is interfering with it being able to connect. I haven't added or changed any programs recently, I've only uninstalled a few games/programs that weren't in any way related to the modem.
What programs could be the cause of error 633? Is there a list? Or is there another way to fix it? I can add more detail if needed. Well, I went out today and left my computer on while I was gone. When I came back, it was connected to the Wifi again. I've been using it for a bit, but now it's going on and off again. It's on for the moment though...
View 3 Replies
View Related
Jun 6, 2011
Im trying to get my Ethernet adapter local area media connection working but i dont no how?here is what the cmd text box for it says,Ethernet adapter Local Area Connection: Media State . . . . . : Media disconnected Connection-specific DNS Suffix . :and thats all that box says.
View 1 Replies
View Related
May 25, 2012
Whenever i try to access the homefront multiplayer it wont work. once i click on multiplayer in the title it pops up as a screen that says "you have been disconnected from steam" i tried everything from getting a new router(my old one was 6 years old and barely works) to reinstalling the game but nothing has worked.
here is the screenshot if you want to see: Steam Community :: Jh71590 :: Screenshots [URL]
View 4 Replies
View Related
