USB 3.0 Host Controller Not Found
Sep 15, 2011
Yesterday, my usb 3.0 host controller seems to have stopped working. I have tried enabling/disabling controller from BIOS, reinstalling drivers, finding different drivers, and reinstalling my mobo CD, but to no avail. (Yes, i already tried searching).It does not show up in windows device manager at all, but when i plug my mouse into the ports, the LEDs light up, but the system does not detect it (nothing happens, no chime or anything).
View 4 Replies
ADVERTISEMENT
Nov 18, 2011
I've just recently upgraded my pc but i'm having issues trying to install and setup the drivers for the usb3.0 ports and updating the firmware.
I'm running on Windows 7 x64
My motherboard is the
P8P67 PRO Rev. 3.0 - New P67 B3 Revision
I have tried the drivers and firmware from here without any success. RENESAS/NEC Drivers & Firmwares Perhaps I am installing the wrong drivers? No clue.. i'm not the best with computers so that's why I cam here.
Also in the end my goal will be to run and use this product which needs to be ran from USB 3.0
The product is the Black Magic Intensity Shuttle Blackmagic Design: Products Blackmagic Design: Support Detail
Here's a good video tutorial to setup the drivers but mine doesnt allow me to open the host controller.. it just says Host Controller not found..
View 3 Replies
View Related
Apr 13, 2012
How do i found out what my Server Host Name is?
View 1 Replies
View Related
Nov 24, 2012
I'm also running Windows 7, 64 bit. I am unable to update or download any software from websites. I am however able to download torrents! I just ran avast and have run malwarebytes and AVG and all have reported and removed affected files. But I still have the same problem. For example, I try to download the new adobe flash from the adobe site, I then hit run when prompted. It then gets stuck at retrieving the file until the error appears: "Installation encountered errors Actionlist not found".
I try to update malwarebyes and receive: "An error has occurred. Please report this issue to our support team (include the content of all error message(s) and code(s) in your submission). PROGRAM_ERROR_UPDATING (0,0, Host not found).
View 1 Replies
View Related
Jan 28, 2013
Amd usb 3 0 host controller driver
View 3 Replies
View Related
Jun 22, 2011
I have a W7 Home Edition 64 bit and by mistake installed an old piece of hardware which over wrote my Network USB Host Controller driver. I have a disk image backup from before; I just need the name of the driver so I can install the correct one.
View 2 Replies
View Related
Jun 13, 2012
The device cannot start. Error 10.I have installed the drivers various times and the controller will not work.I have an MSI Z77 GD55.
View 9 Replies
View Related
Feb 16, 2013
I clicked on Device Manager > Universal Serial Bus controllers. Five members of the Intel 82801G (ICH7 Family) were listed. One of the five was described as a USB2 Enhanced Host Controller - 27CC.
My PC has 3 USB ports. How can I determine which is the Enhanced port? What if I plugged a USB Hub into a port other than the enhanced one, would it work better or not at all?
View 1 Replies
View Related
May 4, 2011
i started my pc 2day 2 find thay some of my usb devices hav stopped workin and an error msg in device manager. the error is on the standard enhanced PCI to USB HOst controller. my mobo is a asus m4n68t m le v2 Windows 7 x64
EDIT: I uninstalled the driver n rebooted. windows reinstalled the driver n all seems ok so far
View 2 Replies
View Related
Mar 28, 2011
How to get driver"standard enhanced PCI to usb host controller -version 1970-01-01" for windows 7
View 1 Replies
View Related
Jun 22, 2012
I need some information regarding the convertion of SATA to AHCI.I have built a new PC with i5 2500K,Asus P8Z77 M Pro Motherboard and 8GB Transcend RAM.I tried to install Windows 7 ultimate after formatting my old hard disk(Segate Bracuda 500 GB).I got an error as "Enable Host Controller in BIOS settings"Then i surfed and found that this is the issue with SATA to AHCI Conversion.I also found a Microsoft KB Error message when you start a Windows 7 or Windows Vista-based computer after you change the SATA mode of the boot drive: "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE". The KB has a Auto fix setup file that can be installed on a pre installed hard disk. But i have formatted my disk and i couldn't install a new copy of windows 7.There is an auto run files for the same Auto Fix but when i tried to boot the auto fix from a USB stick,i got an error "Please insert Floppy Disk for copying files".I dont have a floppy drive attached to my new computer.let me connect it to my old computer(intel dual core with mercury motherboard) and install window7 in it with the Auto fix installed on it and if i connect it to my new computer and boot it will it be working?Is SATA will be converted to AHCI after doing this?
View 9 Replies
View Related
Jul 1, 2011
The realtek ethernet controller was not found. If deep sleep mode is enabled please plug the cable.I saw a lot of people having the same problem but there is one problem. I have windows xp while the others had windows 7. I've just formatted my computer and i want to install the drivers. And when i'm trying to install the ethernet drivers it appears this message.
View 3 Replies
View Related
Oct 2, 2012
Realtek network controller was not found
View 3 Replies
View Related
Jun 26, 2011
i just installed Windows 7 64bit on My Laptop [code] After it installedi it. i had a 1 Conflict in My Hardware Device List it said i had No Driver Installed on The Mass Storage Controller. i have tried using the gateway drivers but it said it would not work with this Version of Windows.i tried doing Windows Update it says no Drivers Found any clues where i can get one?????
View 1 Replies
View Related
Feb 16, 2011
After months of searching how to get rid of that "Other Devices" PCI Simple Communication Controller; Intel Techs final found one to fix it. I don't know if this will help anyone else, I hope it does.
View 3 Replies
View Related
Jun 27, 2011
i just installed Windows 7.. 64bit on My LaptopGateway MT6451 Chipset ATI Xpress 200 (RS480) Rev 10 Southbridge ATI SB400 Rev 80BiosBrand Phoenix Technoligies LTDVersion 84.06After it installed it. i had a 1 Conflict in My Hardware Device List it said i had No Driver Installed on The Mass Storage Controller. i have tried using the gateway drivers but it said it would not work with this Version of Windows.i tried doing Windows Update it says no Drivers Found
View 8 Replies
View Related
Dec 12, 2011
Has someone faced the problem of the RealTek Network Adapter/Controller not being found. Yesterday morning my Internet connection went off and when I tried to repair it I got the following message: The RealTek Network Adapter/Controller was not found. If Deep Sleep Mode enabled Please Plug the Cable i searched the Net on my other Computer and found chapter and verse on this problem but none of the suggested cures worked and the Net remained off the whole day. Finally in the night in disgust I shut down the errant computer, unplugged all the cables attached to it, and went to sleep.This morning I attached all the cables and restarted the computer and everything was back to normal again. After scouting the Net the only change that I have made is to uncheck the "Allow this Computer to turn off this device to save Power" Box.
View 6 Replies
View Related
Jan 15, 2013
My laptop is from Toshiba, model L650 PSK1JA OK3017. Here's Toshiba's driver page for my device: Support :: Toshiba ::Computers, Laptops/Notebooks, Tablets, Televisions, DVD and Blu-Ray Players, Camcorders, Storage, Accessories, and moreI recently purchased a blank hard drive along with a copy of Windows 7 Ultimate 64 bit. I've installed all drivers listed on the page for a 64 bit system but when I try to install the "Intel Wireless LAN Driver (For Intel Model Only)" driver or Proset driver, the driver extraction begins, ends, but when the setup is meant to run, nothing happens. I've redownloaded it and attempted to install it twice to no avail.Basically, I cannot connect to the internet and Windows cannot detect my network adapterI can't call Toshiba support because their operating hours are when I'm at school.casionally, when I try running the driver I mentioned before and the extraction is complete, when I select "No" as to whether I want to run the file, Windows gives me the error: "Archive Extractor -- Error occured in system module [-135]".
View 1 Replies
View Related
Sep 14, 2012
as usual I turned off my laptop and after a while a turned on again to use my laptop but it couldn't reach operating system and showed error : " OPERATING SYSTEM NOT FOUND" !
I tried all instructions to solve the problem and finally run by windows start up CD to re-install new windows. this time I faced error: " No drivers were found. click load driver to provide a mass storage driver for installation"
View 1 Replies
View Related
Aug 26, 2011
So the other day I logged on to my computer to find all my downloads gone and not reach able and the folder has a huge error something like File osociated cant be found. I have system restored to the previous today and it didnt work What do I do?
View 2 Replies
View Related
Nov 21, 2012
I want download Ethernet controller and net work controller drivers
View 2 Replies
View Related
Apr 10, 2011
I found this site while browsing on my iPod. Now why would I have to use my iPod when I have a beautiful new computer sitting in front of me? Well as the title says. I have no controllers, ergo, no Internet.I bought it second hand, absolutely nothing wrong with it, I think he just might of went too far when he wiped it before giving it to me.So, I came here hoping you guys could rescue me... I'm looking for the driver(s) I need, and I'm also wondering how I can manage to download them to my com if it's not online. I have;System Manufacturer: Gigabyte Technology Co., LtdSystem Model: H55M-S2OS: Windows 7 Home Premium 64bit (6.1 build 7600)Processor: Intel Core i3 CPU 540 @ 3.07ghz (4 CPUs)BIOS: Award Modular BIOS v6.00PGg that's all good, I read it all of my DxDiag.
View 2 Replies
View Related
Jun 18, 2012
My Toshiba Satillite L655-s5153 Laptop doesn't reconize the ethernet port when I plug in my wireless router to the ehternet port. How can this be fixed? I have no internet connection.
View 1 Replies
View Related
Jun 22, 2012
I am looking for these drivers. I have a Sony Vaio desktop that I upgraded from Vista 32bit to Windows 7 64bit. The model is VGC-LT32E.
View 7 Replies
View Related
Dec 20, 2012
multimedia audio controller, PCI simple communications controller
View 1 Replies
View Related
Mar 24, 2012
I've only used VMs for testing known apps, development work and testing OSes.How safe are they from infecting the host with a virus? Normally I use a seperate computer or i switch harddrives and boot up to another drive, so there is no chance for a virus.
View 2 Replies
View Related
Sep 1, 2011
I installed windows 7 ultimate on my dell xps15, but can not connect to my wireless network and cannot connect to the internet through an Ethernet cable, i looked around in my devices and noticed these had a yellow exclamation point next to them:[CODE]ecause of this i am not able to use usb drives or connect to the internet in any way on that computer, i dont know what i need to get this fixed and since i cant connect to the internet i sadly cant just update them like i would like to
View 7 Replies
View Related
Oct 28, 2011
I have a J & W H61M-D3 (B3) motherboard with an Core i3 2100,4 gig DDr3 ram.Windows 7 professional 64 bit Im despritly looking for the drivers for pci simplecommunications controller and SM bus controller
View 2 Replies
View Related
Jun 21, 2011
I've been having some BSOD probs, so I'm currently updating all of my drivers. The only one I can't find an update for is called PCI Standard Host CPU Bridge. Could you point me in the right direction, so I can get the update?
Also, for some reason, PCI Standard Host CPU Bridge is listed twice in Device Manager... and both entries seem identical. Would this mean I have to update both?
Some spec info:
Dell Inspiron 1764 Laptop
64 Bit Windows 7 Home Premium (SP1)
Intel Core i5 2.27 GHz
Motherboard: Dell 0TKV96
4 GB RAM
View 2 Replies
View Related
Dec 3, 2011
I config my host file to go facebook (my country prevent me to go there ) and It work probably to one day... I cannot go to facebook, and I checked my host file again. It's still no change from that time, but there is a small thing: host file now has a key icon at left-bottom. (That I'm sure it doesn't appear before).
View 2 Replies
View Related
Oct 6, 2010
I am trying to set up a VPN on my Desktop computer (HOST) so that I can connect to it from my school with my laptop (CLIENT). At one point it was working, but now every time I try to connect I get "Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection."I know the issue is NOT my laptop, because I can connect to another VPN that I currently have running in place of the one at home (One obvious reason I'd like the home VPN is that my current one is in Sweden...)I also have little reason to believe that my network settings are wrong, because I have the Host computer set as DMZ on my Linksys WRT160N Router and have forwarded the PPTP Port to it as well (Just in case.)I've gone as far as reformatting my Desktop computer and doing NOTHING but installing Network Adapter drivers and an antivirus, and then setting up the VPN and it STILL doesn't work...
View 2 Replies
View Related
