Should I Dban And Start Over
Oct 11, 2012
I was able to reinstall Win7 Ultimate on my Dell laptop, Precision M6300 from a WIN7 disc I made following your site's instructions. However, I noticed that 67 gigs was already in use and I know Win7 is not that large. Tried again and this time I did get the drive options, but NEW was grayed out. I tried using format and that would not work. There are 2 partitions. One is 2.1 gig and the other is 230.2. No idea what the 2.1 partition is, certainly too small for Win7.I would not be doing this except my computer was in an endless updates fail, cancel updates every time I turned it on. I uninstalled all my programs and deleted everything I had not moved to an external hard drive. I'm tempted to dban the hard drive, but that's probably not a good idea. Yes, I also saved the drivers to a jump drive.
View 5 Replies
ADVERTISEMENT
Oct 12, 2011
Last night, I ran DBAN. This morning, only 4 percent was finished. My HD's shutdown after a few minutes due to inactivity I guess and I can't figure out how to disable this. I've looked in the BIOS under power management options but I am only able to select S1 or S3. There are 2 other options: AC Power Recovery (off) and Low Power Mode (disabled).
I am running a Dell Dimension 4600, 2.66 GHZ, 4 GB RAM. Bios version 12. Windows 7 32 bit (am getting repeated BSODs and error messages, which lead me to want to wipe completely and reinstall).
View 8 Replies
View Related
Apr 13, 2012
How much worth would it be if I wipe out and erase my current HDD with Darik's Boot and Nuke before doing a clean OEM Windows 7 install (x64)? Or would there be a chance I can damage my entire system if I do that?
View 4 Replies
View Related
Oct 3, 2011
I am trying to help a friend out with his Sony Vaio E Series Laptop. The computer had crashed and he tried to do a clean install of windows but it failed and nothing would respond. Even when you tired to do a clean install of windows again it just went to the light blue windows screen with the bird and nothing happened. So I used Dban to Wipe the hard drive clean and start over from scratch. After I wiped it I tried to reinstall windows and it says there are no signed device drivers found. So I checked the bios and it's not even registering the hard drive. I have been searching the boards everywhere to find a solution to this. The Bios does not allow for much change so I can not make sure it is set to a SATA connection and I have tried turning off the signed device option when starting up. Nothing is working.
Sony Vaio E Series
Model# VPCEB23FM
Intel Core I3
View 9 Replies
View Related
May 21, 2011
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies
View Related
Mar 7, 2012
Monday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
View 1 Replies
View Related
May 8, 2012
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies
View Related
Oct 3, 2012
I'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
View 3 Replies
View Related
Sep 17, 2012
When i got home today didn't my computer work, my girlfriend has been the last one using it. So don't know how things were just before the shutdown or anything.when i turn on the computer i get to the screen where "touch bios" is and where i can see the options like Bios settings, boot menu, xpress recovery.but i cant press anything, and after about two seconds on that screen the PC shuts down again.The keyword lights up so there is a responds on it, but just doesn't work to press anything before it shuts down.I've got BSOD upto several times a day for a few months time.believe that my computer is affected by some virus or something is delaying my computer. might be an combination of several things.I got no external things hugged up to the stationeer computer right now.it is a windows 7 x64 machine.
usually when i get issues i can access advanced boot up or bios, but can neither in this case..I wonder if it might be a hardware issue.
View 9 Replies
View Related
Jul 1, 2012
When I start up my computer, my Steam starts up, then I manually start Chrome. Chrome comes up fine, Steam does too, but when I try to right click on Steam and click friends, all it does is create another steam process running at 100-108 K. Then if I close Chrome and try to reopen it, it will do the same. This happens with EVERY program after I start up. There's a 5 second window where I can open programs without issue, then after that it will only start 108 K copies of them. It takes me around 30 restarts just to get it working properly, if not more.
View 14 Replies
View Related
Feb 5, 2013
I have a video card that used to boot up in windows 7 - but know this computer with a GeForce 9500GT video card boots up with the Vista boot up logo.I found out this was the video card because I have another card with another GeForce video.I took the swapped the video cards, and the indication changed. The original computer booted with the windows start up screen. And the test computer booted up with the vista boot up screen.
I was told by a local computer repair facility this had something to do with video drivers.I tried what the organization suggested and uninstalled all video drivers (I used generic Windows 7 Video Drivers).Then the organization recommended downloading the latest video drivers for the GeForce 9500GT.This video card has 512GBytes of memory. I did this.Then I was told to install the newly downloaded video drivers.I resrted the computer with the Vista login screen with windows 7 operating system,and the vista login screen was displayed.
View 1 Replies
View Related
Dec 28, 2011
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
View 3 Replies
View Related
Mar 2, 2012
1. Which DLL uses W7/64 for the sound at start-up of Windows? I would like to edit it for my own sound.
2. How can I alter the sequence of the entries in the Start-menu? Now the sequence is in sequence of creation, I would like to group them by application-area.
View 1 Replies
View Related
Dec 8, 2012
F keys will not work either! I don't think I have a disc to restore from, what else can I do?
View 4 Replies
View Related
Sep 3, 2012
I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
View 3 Replies
View Related
Feb 7, 2012
My laptop freezes when i turn it on after a minute or two just enough time to maybe sign in but i can go into safe mode and it wont freeze but you cant do anything in safe mode that
View 1 Replies
View Related
Nov 3, 2012
My dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.
I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.
View 6 Replies
View Related
Feb 25, 2011
using windows 7, have a blue screen at start up issue, memory dump. Sadly the PC wont start so unable to try too much, it lets you select user, attempts to ,log onto the user then just goes to mthe blue screen and starts the cycle again. It will not start in safe mode either, basically the same result although sometimes it loads and you are in but when you try to do anything it goes to the blue screen again. I did get the error code (not always the same on the blue screen but this one comes up most time), "driver IRQL not less or equal"
View 2 Replies
View Related
Apr 12, 2011
The problem that i am facing is that, my windows 7 search is instantaneous but when i click on the application the application takes time to load but if i run the same application from Desktop it will load immediately. This happens only one first time after bootup.
View 9 Replies
View Related
Oct 18, 2012
I have Windows Ultimate (x64).I use the Asus Suite II supplied with my Asus Asus P8Z68-V Pro Gen3 Motherboard (which I like for fan and temperature monitoring) Ai Suite II always loads BUT "on screen" it is messy during loading because a seemingly AI Suite bar sized white artefact appears top left of screen for 10- 20 seconds before disappearing when the AI suite icon appears in the notification tray. Sometimes a white square also appears temporarily.I have noted that if I exit Ai Suite II and reload via the Asus AI suite supplied Shortcut I never get these artefacts AND the suite loads instantaneously (I note however Asus uses AI Suite II.exe via the shortcut but via the Asus installed Task Schedule it open via "AsRoutineController.exe -open"I have also tried unloading AI Suite II and AsRoutineController.exe and loading AsRoutineController.exe and it too loads cleanly and almost instantaneously.
1) Why does Asus use the Task scheduler instead of loading via the normal Windows Startup procedures?
2) Could it be so each can be easily disabled if required) and is that the ONLY reason?
3) what is the -open switch in the command line?
4) Is there ANY good reason why I should not disable the AI Suite II in the Task Scheduler and add it the the Normal Windows Startup applications I use the Free version of Startup Delayer as it has served me wonderfully with my current Win 7 O/S (and my previous XP) in ensuring all desired Notification Tray Icons display EVERY time).
Today I PROVISIONALLY made the change and AI Suite II opens cleanly (as other Startup apps) without temporary white artefacts and with no noted side effects so far. I am nervous however, to make it permanent without advice from knowledgeable Seven Forums members on this subject
View 1 Replies
View Related
Mar 1, 2011
I have an Acer Aspire M5811 running Windows 7 - 64 bit. When I tried to start my pc tonight I ended up with just the desktop wallpaper with no icons or start menu.
I tried to reboot in safe mode but the pc became unresponsive. I also tried using the system restore disc but again nothing.
View 2 Replies
View Related
Aug 13, 2012
Yesterday, the task bar and Start button mysteriously disappeared.I've also found that the "Taskbar and Start Menu Properties" windowdoesn't come up. There are two places to click on in Control Panelthat should bring up this window, but it doesn't. The Control Panelborder changes color as if something is starting to happen, but thennothing happens, possibly indicating that some program starts to runbut then finds something wrong and exits. I didn't see anythinginteresting in the error logs. The desktop icons appear normally.The problem exists only when logging onto my son's account. When Ilog on as administrator, the task bar and Start button appearnormally.The usual tricks don't work: Ctrl+ESC, or bringing up Task Manager andtrying to rerun explorer.exe. I tried sfc to check for corruptedfiles, but none turned up. I ran an AVG scan and it did find one fileit considered a threat, which it removed, but that didn't solve theproblem.
I found a web site that referred to the registrykeyHKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorerwhich has a NoSetTaskbar value that can be used to disable the"Taskbar and Start Menu Properties" window. On the administratorlogin, the Explorer subkey is there all right, but doesn't haveNoSetTaskbar. (It does have NoDriveTypeAutoRun.) But when I log ontomy son's account, the Policies key had no subkeys at all. I triedadding an Explorer subkey without adding any values, but this didn'tsolve the problem. I haven't yet tried adding a NoDriveTypeAutoRunvalue, but since this seems to pertain to AutoPlay it didn't seemrelevant to this problem.Any thoughts as to what might be going on or what might fix it?
View 2 Replies
View Related
Feb 16, 2013
i cant start my laptop in normal mode. when i start in normal ,mode i stuck in black screen only the mouse pointer is appear, when i wait it reboot again but still i get stuck in black screen
View 1 Replies
View Related
Oct 1, 2009
How to Pin Libraries to Search and See More Results in Start Menu ?
View 0 Replies
View Related
Jun 29, 2009
How to Pin Search Connectors to Search and See More Results in Start Menu ?
View 0 Replies
View Related
Jan 28, 2011
I can't figure out for the life of me how to get my Diagnostic Policy Service to come back on. not sure what to do and i've been lost for the last month trying to figure out what to do without having to re-format
View 3 Replies
View Related
Sep 21, 2012
i have recently bought a laptop to desktop memory adapter. when i installed my 4gb laptop memory my computer didnt start, i tried it in both slots and nothing. but when i put my other 1gb in the other slot, it starts like a dream.when i go into the BIOS i expect to see 5gb of ram but i see 3gb. what i can gather from that is that my desktop is not allowing the full 4gb dimm. if i go on CPUID it states a 2gb dimm ( 4gb) and a 1gb(my old one)
View 9 Replies
View Related
Aug 23, 2012
I don't understand it sometime hibernation will start then all ob a sudden it will stop working and I did change it. Windows 7 32 bite system?
View 1 Replies
View Related
Oct 14, 2011
Last night I got on my laptop and it was working fine once it was done doing system and windows 7 updates. It restarted itself after 5 minutes of it being on, then did it again after another 5 minutes. Now, I am just getting the beginning Toshiba Satellite screen, a black blank screen with a blinking cursor then it shuts off. It keeps repeating this process untill you hold the power button to turn it off. I have tried changing the setup back to default settings and did a HDD/SSD recovery and nothing is helping. I need this computer. It's for school and it is essential to my college courses
View 5 Replies
View Related
Nov 26, 2011
I am Running Windows 7 Professional. This is what it says every time I try and start the Fax Service.
The Fax Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by any other service or program.
View 12 Replies
View Related
Apr 3, 2012
I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fresh from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems.Does anyone know what might be preventing the program from running? I tried shutting down the Spybot Resident and disabling the firewall and virus scanner with no luck. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. [code]
View 5 Replies
View Related
