A few months ago, I set up my computer to dual boot Windows 7 and Ubuntu 10.04. It worked fine. Now I rarely use Ubuntu, and I would like to remove it. I would like to know all of the steps I would need to go through to do this. I have a large partition for winows 7, its recovery partition, then i have one partition for Ubuntu.
View 5 Repliesmy problem is that now i have two operating systems:
1)XP Sp2
2)Linux Fedora
now my boot loader is GRUB and with that i select which of them start,the default is windows Xp, now i want to delete linux and just have windows xp and then install windows 7.
so i think i shoud first change bootloader and then install windows7,but i don't know how to do this this.can u plz help me?
another thing where can i see windows7 requirements,and the file system for installing it shoud be NTFS is it right?
at least how many GBs shoud i have for installing it?
i have windows 7 rc1 32bit dual booted with windows vista home premium 32bit. I want to remove windows 7 safely without the chance of breaking my vista. Can someone please tell me what the best way is?
View 1 Replies View RelatedAll I have a dual boot Win 7 and XP, I want to remove the XP as I no longer use it. Both are active and on seperate discs, can I just format the disc? I have used easy BCD to edit the boot menu so only Windows 7 default yes.
View 4 Replies View RelatedI have windows 7 and Vista installed, both ultimate and 64bit.
they are install on 2 seperate physical drives.
Vista was installed first about a year or so ago. i added a new drive and put windows 7 on it. i would like to remove the vista all together as i am happy with windows 7.
in disk manager when i look at both the drives they are showing up and both being active and primary. but the Windows 7 is showing as the boot drive. i am not able to format the vista drive. the only options that are not greyed out are change drive letter and shrink volume.
I have been doing some research and i have tried this option
bootsect.exe /nt60 all /force
i have done it remotely and if it worked it should have rebooted the system and i should be able to remote to the system. i am unable to reach it now until i get home.
my question is why am i unable to format the vista drive in Windows 7 and have i just screwed up my bootloader?
I recently did an install of Windows 7 (a clean install) and accidenlty selected to dual boot somehow (I chose to install 7 on the D drive instead of C, where Vista is installed)
I do not want Vista anymore. How can fix this?
I have 2 hard drives with XP installed on 1 and then i installed windows 7 on the other. On bootup i get the option to select the operating systems.
Now i want to only have windows 7 and remove XP completely so that i can format the hard drive with xp on and use as backup.
The problem is that when i switch boot sequence to boot off the win 7 hdd first, i get BOOTMGR is missing. I have tried the startup repair from the win 7 cd but it also fails with an error saying Missing boot manager.
If i switch back to use XP hdd as 1st boot device, i get the OS options screen again and can boot into both without issue.
Does anyone have any idea of how i can get rid of XP and boot with only windows 7 as first boot device?
I made a dual boot system about a month and a half ago and I now no longer have need of Windows XP. Windows 7 is my primary OS, so how do I go about removing the XP partition?
View 6 Replies View RelatedHope someone here can point me in the right direction. I currently have a dual boot machine. Win7 and Vista. I bought the machine with Vista and shortly after 7 came out. So I installed 7 and never looked back at Vista. I want to delete the Vista partition so I can regain space on the drive but it wont let me. It's an active primary partition. Even though I am logged into 7 it says that I can't delete a primary partition.
View 2 Replies View Relatedi had install windows 7 32bit on XP and now i am using Dual Boot OS i want to know how can Remove XP from Dual Boot with 7
View 3 Replies View RelatedI have recently "tried" a Linux .ISO CD and took the wrong option and partially installed ubuntu as a dual boot option. Since that time I have discovered Oracle VirtualBox and much prefer this route to look at and experiment with linux. However I have a legacy of my untutored fiddling in the form of a splash screen at power up [straight after POST] of a dual boot option - Windows 7 or ubuntu p which I dont want. Its an annoyance rather than a catastrophy but I am at a loss as what/how to 'edit' this startup file to remove the dual bootup option. I have tried FIXMBR from the repair option but the dual selection option remains.
View 3 Replies View RelatedI am dual booting Vista and Windows7 RC 7100. They are both on the same Hard Drive on different partitions. I have made the decision to stick with the new OS (Windows7) and give Vista the boot. So I want to get rid of the extra partition and revert to a single OS (Windows7).
I don't want to reformat the whole hard drive and completely re-install the windows7 operating system. I want to remove Vista from the dual boot menu and keep windows7. Then I want to format the Vista Partition. How can I do this and keep my present installation of Windows7 without having to reinstall Windows7?
1st. Installed XP on IDE drive, 2nd. installed a Sata drive, installed Windows 7 on that drive, want to remove the IDE drive, is it as simple as disconnecting the XP drive and do a startup repair, or is there going to be an issue with the XP drive being the Active drive, will startup repair make the Sata drive the Active drive?
View 3 Replies View RelatedSee the video tutorial on how to Remove Windows 7 From Dual Boot With The Bootsect Command.
View 0 Replies View RelatedI have a dual boot system (Win7 &XP). I have had to recover the boot files for Win7 in the past. Now the boot screen shows a choice between 'earlier version of windows' and 'Windows 7 (recovered)'. how to remove the word 'recovered' from the Win 7 description?
View 3 Replies View RelatedTried tackling this one single-handedly to begin with and failed.
I have Windows 7 and Windows Server 2008 R2 installed as a dual boot, different partitions single HDD.
I want to remove the Windows 7 partition and keep the Win 2008. I do NOT want to lose anything from the Win 2008 partition. Taken from Disk Management.
Disk 3 with 5 partitions
1st - Healthy, Primary partition 73MB. (I thought this was system reserve but its not, leftover space from a previous partition change). It's currently mounted and completely empty.
2nd - Unallocated space 500mb
3rd - Windows 7 OS (Healthy - system, active, primary partition)
4th - Windows 2008 Server OS (Healthy - boot, page file, crash dump, primary partition)
5th - Unallocated space 8mb'ish
I haven't been using Windows 7 for years and want to clean this drives partitions up because it's messy and wasting space. I just need windows server 2008 as it's been used as a server for years and that's all I need it for now.
I want to safely remove the windows 7 installation and merge that partition along with the 1st and unallocated spaces back into a single partition where windows 2008 server resides.
Now I've tried tackling this myself and failed. I stupidly made the windows server 2008 partition as active which killed my boot and took me forever to repair with zero loss fortunately. Sadly it was as simple as using diskpart in a command prompt from win 2008 boot disk to make win 7 partition active again.
So, how do I do this? The boot manager must be on the win 7 partition as removing active killed it. The windows 7 boot (during startup) is long removed, system boots directly to windows 2008.
I have two drives (C and D) with Vista on one and Win 7 on the other (not sure if they're actual drives or partitions of a single drive, how do I tell?). I am dual booting and never use Vista. Starting to need the disk space and want to delete Vista. Is this difficult in this scenario?
View 2 Replies View RelatedMy main operating system (on c: drive) is windows XP. i installed windows 7, on a partition but now need to remove it because i am running out of hdd space (only 111gb ). I cannot figure out how to change the windows 7 boot.ini file. what i think i have to do is modify windows 7's boot.ini , then format the partition and merge the free space into the main partition (the one with XP).
View 2 Replies View Relatedi have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies View Relateddual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies View RelatedAs currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
I installed vista on my harddrive, and then made a partition and installed windows 7 on it.
I no longer want vista, and just want windows 7.
How would I go about deleting vista all together, and just have windows 7?
If I make the windows 7 partition active, it won't boot.
how do i remove single os from dual.i have windows 7 and server 2008.nd now i want to remove 2008.
View 4 Replies View RelatedI have Win XP 32 bit on my old drive. I buy Win 7 full retail and a new HD. I set bios to boot from cd etc. Win 7 starts up. It shows the 2 drives, so I select new drive...no problems. It starts install. I leave it to do its stuff.When I come back its up and all ok.I dint get any option to boot from XP. The drive was listed as "SYSTEM" but not old Windows or anything.
Also ASUS chipset drivers dont work and they were listed as 7 drivers.I tried Vista drivers but it normally shuts down and restarts. Nothing.
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies View RelatedI have XP (x86) installed on one partition.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies View RelatedI installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies View RelatedI was having win 7 RTM and i tried to installl OSx86 in second hard disk
after few failure i successfully installed OSx86 in my secondary had disk now the problem is that i cant boot win 7
i changed boot order i tried windows 7 disk repair
but both failed
im getting some Boot mldr missing...
Actually even OSx86 is not booting i get OSx86 boot screen with two hard disk to select if i select windows disk it still says the same Boot mldr missing.
I can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies View RelatedI setup an XP/Windows 7 dual boot on two drives. Currently C: Windows 7, D:XP
Love Windows 7 and now I'm ready to convert to single boot Windows 7.
I'm not real savy re. bcdedit so will need very detailed instructions
I did find the command line in Windows 7 by going through accessories but I'm scared to go further without help.
Eventually I want to clean up the D:xp and use it for storage etc.
I'm guessing this procedure may have already be written up but I can't seem to find it.