I am having trouble using a locally networked printer when I use Remote Desktop to connect to a Vista machine. Under the local resources tab for RD, I have checked printers. The only thing I can figure is that my printer is networked locally, not connected directly to my machine. Every time I try to print during my remote desktop session, I can't access my locally networked printer.
I installed the printer drivers on the remote computer and when I try to locate the printer, I get the following error: "Windows cannot connect to the printer. Server print spooler service is not running..." but the spooler service IS runing.
I also tried to plug in my printer to a local USB port this morning. Still would not work. I keep getting the same spooling error. The drivers are not corrupt, as others have indicated may be the cause. They work fine on my system locally with 7.
I also found a post elsewhere that discussed setting 'share permissions' and 'network permissions' to resolve the spooler error. Still no go.
Any advice would be greatly appreciated. I've spent a few hours on this one and am at a loss at this point.
I have a working local Laserprinter under 64bit Win7. Through LAN another Win7 computer is connected. The remote computer can access local shared folders successfully. But it cannot access the local laser printer (connected through USB). How can I share the local printer to other computers in LAN? Do I have to define local printers explicitely as shared/accessible? Or are they automatically accessible (provided that the local user account and passwort is known at the remote computer? Do I have to install the printer driver in general at the remote computer as well or is the printer driver on the local computer enough?
how the local drive mapping in Remote Desktop works. I use it because it's very convenient, but I'm concerned about the privacy of it, i.e. that other people might see this drive as well.
I need to be absolutely sure before I'm going to continue using a mapped drive.
We have a windows server 2003 configured as a terminal server, running RDP 5.2. All remote workers using XP / Vista are able to ptinr to their local printers from the terminal server. Some are USB so the registry keys have been amended to allow this. However, w enow have a windows 7 remote client which cannot print to it's local printer. The registry key used previously does not exist in Windows 7!
I have WMC running on 3 Windows 7 x64 machines. I use Remote Desktop on my main PC in order to see my scheduled programs on all three machines on one screen. This has worked quite well for me for a long time......until this morning when WMC crashed in one of my remote windows. I visited the remote machine. When I opened WMC it had lost all my programing. It remembered my Series settings, though, which helped some. As of now, it's working on the host machine, ......however, I cannot open that WMC in the remote desktop. It crashes with this message in the details section:
Description: Stopped working Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: ehshell.exe Problem Signature 02: 6.1.7600.16385
I have a new computer at my office running Windows 7 Professional. My computer at home is running Windows 7 Ultimate. Immediately after connecting via Remote Desktop (from my office to my home), I get an eror message that says "Remote Desktop has stopped working". I didn't have this problem when my machine at the office was a Windows XP Pro machine.
I have two laptops an ASUS with windows 7 ultimate and the other with windows 7 home premium. I also have a built desktop with windows server 2008 r2. I have enabled remote connection on the server and can log on with all of the user accounts. But I can not file share when I have remotely connected to the desktop using remote desktop connection. I have enabled printer and clipboard and then went in to more and selected the drive i wanted to share. I then logged on to remote desktop and the drive is not listed in computer management or in my computer. Is it an issue in the windows server os that I need to do?
I trouble shot an issue with RDP that has me to believe the sollution lies in somthing to do with printer settings in Windows 7.Affected computer RDP's sucessfully logs into a load ballanced terminal server farm, several moments into the session being established I am getting the "Remote Desktop stopped working" dialog box.This issue is localized to this single computer and is fixed by unchecking the "pinters" option in the remote desktop settings. this computer acts as a print server to a small laserjet printer, all other computer on this small LAN can successfully print to this printer from their local desktop or while connected to RDP sessions. I have tried : Rebuilding RDP desktop icon for user. New Local machine user accounts. starting/stopping Print spool services. USB and LPT1 cables (currently on LPT1). I'm 2 inches away from backing up this users data and giving them a new computer. It doesn't make any sense
I know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
I am using Windows 7 Pro 64bit, trying to use Windows remote desktop to connect to another PC in the LAN and install software. Right click on the .exe and choose run as admin. As soon as I do that I get a black screen with 2 white bars in the upper left hand corner(looks like a pause button). The user who's pc I am connected to sees the log inbox for the admin creds, how ever I can not get to it. How can I make that screen stop popping up?
We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
Searched the internet, forums and tried everything even removing IDT.And getting a major head ache out of this. x64 notebooks.But on 1 single notebook the RDP does not work when connecting through a VPN.(Sony Vaio S-series factory customized i7, 8GB)The office has a Draytek VPN with an 2003 AD domain.Other notebooks do not have the problem. Remote desktop locally works Remote desktop via branche office works (through hardware based vpn tunnels) MS VPN connects, network is browsable MS VPN -> RDP shows: [Configuring remote session] But after a while connection is denied MS VPN -> Fileshares - functional MS VPN -> Webserver, FTP server - functional Maybe one of you guys have a hunch why this specific situation doesn't work?
My husband has a Win 7 pc custom built by Fry's. Is there such a thing as a remote control (I guess it would need a usb dongle) to control it? Like to watch Netflix or Xfinity TV on the computer while he's in bed. He has a large monitor and then I could get him to get the pc off the kitchen table and upstairs. I tried using google but just got hits for remotely accessing from another computer. Didn't know exactly what to search for. His HP laptop came with a remote but we've never used it.
I am trying to connect to another Windows 7 machine on the same router, but it will not connect. I have remote desktop enabled and checked under the computer settings, but when I right click the computer in the network & sharing center and try to connect, it won't work. I also tried manually entering the computer's network address but it failed. Both machines are Windows 7.
Using Remote Desktop I can connect my one Win7 machine to my other Win7 machine.
However I don't see my "real" desktop - by that I mean the remote machine spawns a sort of virtual desktop and shows me that - I can't run the graphic card control panel for instance - and if a monitor is plugged into the remote machine you just see the login screen not what I'm doing.
So is it possible to see the 'real' desktop using Microsoft Remote Desktop? Or do I have to find some other remote control software - like VNC or something like that.
Here is what i would like to try and do. I have two computers, a Desktop and a Laptop. My Desktop sits at home, while my laptop goes with me to school or anywhere else that i need it.Now, i would like to see how i can set up my computers (or network?) so that i can access my Desktop files via my laptop online.I want to try and carry as few files on the laptop as possible, such as if ever lost or stolen, i wont have my data or files compromised/stolen.I also plan to install a SSD on the laptop, in order to try and make my battery last longer, but SSD's are still too expensive (i have a 250 HDD right now), I'm thinking of getting a 64GB SSD and trying to carry as few files as possible. Getting a 250 GB SSD is just way too expensive right now.I have heard that Windows has a thing called Remote Desktop Connection, but i have tried to use it, but i never got it to work somehow. I am running Windows 7 Home Premium.
I am using windows 7 ultimate on my desktop and laptop. I am trying to connect to my desktop. On my desktop I have created a credential. the name of my laptop is laptopTo make things simple lets say I put user name abc and password 123. From my laptop I put in abc for user and 123 for password I can connect to the desktop but it says invalid user name or password. I have tried creating different user names and passwords on the desktop fot the laptop. What am I doing wrong? I do not understand why this is so difficult. Its problably not but the help section in windows 7 does not give enough information.
I just set up a new computer and they both are on the same wireless network and are even connected to eachother through bluetooth. I'm trying to connect to my laptop from my desktop tower (the new one). The Remote desktop thing is asking for a log-in for the laptop. Well I do have a password, so I enter in my user name Shannon, and then my password....It doesn't work...try it again. and it doesn't work. Even though it accepts the username, the password isn't accepted, and I know 1000000% that it is right. So whats going on? The tower is running Windows 7 Home Premium 64-bit and the laptop is running Windows 7 Professional 32-bit.
I am running a lite version of windows 7 32bit in which the dev took off remote desktop. I have looked everywhere but cant find a guide to reinstalling it.
I have a desktop in a remote location used to connect to a PC in main location to run a program. The new computer put in the satellite office running Windows 7 Pro 32-bit did not have parallel ports and I needed two ... So I installed two PCI-E cards to add the ports. These print fine locally but the printers do not pass through to the Windows XP Pro machine.How can I make the PCI-E LPT ports available in the remote session?
Just recently immigrate to win 7, I used to connect my XP work computer via remote desktop from home, now I cant . The ping command works fine. How can I solve this problem?
I'm using windows 7 enterprise at work and recently on several computers remote desktop tab under system properties > remote is gone. was searching forums for this problem but found only answers that after removing service pack 1 remote tab was back, but then i have a question how come 95% of other computers don't have this problem and also tried installing fresh installations today on thinkpad edge 11 with sp1 and at the beginning remote tab was there but after installing anti virus , office and other crap and several resets remote tab was also gone
Have setup RD for Win 7 64 Ultimate (both boxes) on internal LAN. Connects no problem and the LAN operates at almost full Gbps when moving files between the two. I've disabled the A/V and firewall (Kaspersky A/V 2012 on client, MSE on host) but no changes.Even with all the RDP options stripped down it is slow. Should it not be at virtual speed even with all the bells & whistles across the LAN?
I normally use remote desktop connection over my home network by simply typing the IP address assigned by the router to the computer I am trying to connect to.Now I am in a hotel in another city. I tried using the ip provided through ipconfig and whatsmyip.com, but I am unable to connect through remote desktop connection.
