Reinstalling Windows 7 - Possible To Save Configurations?
Jan 8, 2012
I'm buying a new system, so I will have to make a fresh install of windows. I spent many hours customizing windows and editing settings... Would it be possible to save those preferences and restore it to my new win7 installation? For example, I made a custom theme for windows 7, I know I can save and export it, then import it on the new windows7 installation. But what about other settings? Like everything in the control panel.
I know there's an option to "tell" windows to use less memory that it have by configuring the MSconfig. But is there a way to create dual boot with 2 memory configurations? One with 4GB and the second with 8GB?
I currently use an old Creative X-Fi Xtreme Music sound card in my system. Worked wonders under XP (What didn't, honestly) and upgraded recently to Windows 7. My sound in Windows 7 works great, all speakers emit their proper sound in their proper positions and when I play games, I can hear everything like I did in XP. Someone sneaking up from behind has no clue that I can actually hear them. -.- Anyways, to my point...
Front Left becomes Rear Right, Center Becomes Front Left, Front Right Becomes Center, Rear Right Becomes Front Right My Rear Left Makes No Sound And Sub Becomes non-existant!
This all happens just after a quick *Pop*, and suddenly someone speaking dialogue in front of me sounds like he is behind me! The only way I have found to fix it is to open my Creative console (I use Game Mode (Entertainment proves just as problematic)), set my speaker configuration to 2.1, then set it back to 5.1 and the sound works properly again! But, wait about another half hour, *Pop*, back to messed up configuration.I have an XP partition, works fine under it with no sound re-arrangement,Figured It was my speakers, Bought a new set, does the same thing.I've checked the cables: Everything is as they should be and placed correctly Does this in OLD and NEW games, as well as iTunes and WMP.
I'm trying to reinstall a game controller on Win 7 64 bit, but every time I replug the controller into a usb port it shows the previous settings.How can I remove the settings from my machine so I can do a fresh install of the game controller.
i disable alot of devices in dev manager in order to achieve the best latency for a live audio rig. i also use the same laptop for alot of other generic activities in which i want all devices active. since the removal of "hardware profiles", i have not figured a way to boot into the same OS with different device manager settings. i was wondering if i created a 2nd boot partition, could it access the single OS that is on my hard drive? 1 OS, 2 boot configs?
how can i change my pc controllers configurations for example my pc recognize button 3 as button 2 and so on..i opened the controller configuration panel but when i press button 3 it shows button 4...
I changed via the dialog the TEXT SIZE via the screen resolution in the control panel to CUSTOM SIZE.With one of the newer "Cinema" or Very Wide screen (1680 X 900) displays after I'd increased the text size to over 160 % I didn't get the possibility to SAVE any documents any more via the SAVE AS button. The SAVE dialog would appear but the SAVE button was missing.The effect was noticed in Office 2007 (all programs) Notepad etc etc.Seems to be a Windows fault as this should not be allowed to happen.on more traditional "Squarer" type monitors -- no problem.
Is there any way to set the default save location folder for downloads in IE8 to the last folder that the same file type was saved in? It makes no sense to default to a single folder and have to browse through to the desired folder for every single download, so I assume there has to be an option somewhere.
I bought a brand new Samsung QX411 two months ago. It's a great computer. Problem is, it got hit with a nasty virus that was pretty much completely debilitating, so I took it in to Best Buy (mistake), and they told me the best thing would be just reinstall Windows 7, and everything would be great. Well, I did, and now I am stuck. I reinstalled, but I did not realize that literally nothing would be in place. I am not completely naive: I did save all of my important files, folders, music, etc. So it's not that I have lost my data and am now crying "woe is me." Instead, I have basically a blank Windows 7 and nothing is there. I can't connect to the internet, because it is telling me that I don't have the necessary hardware (I know I do, but still). A basic summary would be this: I have no idea what to do after properly installing Windows 7. I want to get it as close back to normal as I can, but I don't know how to start.
I recently built a new computer system that contains my old HDD, which I transferred from my previous PC. The old copy of Windows 7 that was already installed didn't work in the new PC, as expected. Instead, I have a new copy of Windows 7 available that I need to get on the HDD. But I also need to deal with the old Windows copy. I've already transferred all of my personal files from the old copy onto a portable HDD for safe keeping. What I plan on doing is reinstalling the new copy of Windows 7 onto the PC's HDD to be used in the new computer. I was able to acquire the new Windows 7 version for a really cheap price from my college.
So now I either have to format my HDD so that the new Windows 7 can work properly while keeping the old/useless version out of the way, or wipe the old Windows 7 from the HDD completely. Should I keep the old Windows 7 on the HDD and just never use it, or would that conflict too much with the partition used by the new version? If they do conflict, how should I go about removing the old Windows 7 partition? dealing with the HDD and OS seems to be one of the most annoying parts of a PC.
I have bought a Lenovo Ideapad about 6 month ago with Windows 7 Home Premium.I now want to Re-Install Windows and delete my whole data. In Short, I want it to be Completely Clean.I Dont have My Windows CD to do That, But I have a Key Below My laptop and its Genuine.
I mistakenly purchased a 32 bit version of windows 7 pro which was on OEM. Now I am going to purchase the 64 bit version OEM software again and format my hard drive and reinstall the 64 bit OS on my PC.
My question is now that I will be using the 64 Bit version, can I re-use my 32 bit OEM on a completely different PC as it will no longer be installed on my PC?
If so do I have to uninstall it first or will a simple wipe off the hard drive deactivate the 32 bit key? Also is there a cheaper option to purchasing the OEM software again, such as upgrading from 32bit to 64bit?
I've recently purchased an SSD and would like to utilize it as a boot drive. I am happy with my configuration and would like just to install Windows 7 on the SSD and use it to boot -- with all other hardware and drives remaining without change.
So I've been using my new laptop recently and discovered its hybrid hard drive contains an SSD. And boots up windows in seconds. This has caused me to want to buy an SSD for my desktop (my real gaming machine). The trouble lies within reinstalling windows and backing up.My desktop currently has two hard drives. Both 1tb each, one is full. And the other is barely used up. If I were to buy an SSD for my desktop. Would it be possible to reinstall windows (OEM) onto my new SSD? How would I do this? Also I've never backed up before (terrible I know and I want to start now!). However my family does own a 1tb external HDD. How much of my 1.2tb of data could I backup, and how would I do it? I've got loads of games and whatnot installed I don't want to lose.
I'm currently running windows 7 64 bit on my current system. I am just after buying a new pc and want to install my OS on my new SSD. I'm going to keep the old raptor HDD for my new system also (the raptor HDD currently has the OS on it)
1. Can I install windows to my SSD using the same product key yes?
2. How can I/whats the best way to completely remove the OS from the raptor HDD and just use it as a storage device..I want to use the 120GB SSD for the OS & some of my games - (Origin & Steam)
I just installed and activated OEM Win 7 on an HDD. Changed my mind and want to purchase an SSD, place Win on that, and use my HDD for everything else. Will I still be able to install Win or am I too late because I activated it?
I'm not sure this is the right forum for this question, but then again: lots of people seem to have comparable problems, so here goes:As my 3-year old netbook was getting very slow, I decided to get rid of all the junk at once by completely reinstalling the OS (Win7 starter). Now, there is a very easy way to this with the Recovery Manager (as described in the support papers on the HP site), but that didn't work for me. This may wll be due to a faulty HD; I've no way of testing it as my C: drive is now reformatted. So what next?I was not completely unprepared; earlier I made:- a USB-stick with the 'HP USB Recovery Flash Disk Utility' (HP45774). The stick does contain, I think, all or almost all of the contents of the recovery partition. (NB: you need a 16Gb stick and this is a trick you can do only once.
- a recovery CD on an external CD drive, although without a 'disk-image' as by then the system had grown much too bloated already. (should have done that straight away after I'd bought it, although I'm a bit at a loss as to what storage medium would be used).These two means should surely be enough to restore the thing to factory settings? However:- The memory stick should be bootable, but isn't.- Booting from CD works, but the Recovery Manager can't seem to access the diskimage on the usb-stick. (Although, when I call up a command prompt, one of the other options, it is readily available.)So I don't really know what to do now. I'm thinking of two options:1. In one forum thread it was said that the stick thus made 'often' or even 'usually' isn't bootable, as it should be. The advice was to make it bootable, using EasyBCD. That's easier said then done, I found; no luck so far.
The stick does contain a boot directory, bootmgr etc.; it clearly is supposed to be bootable.)2. Following the advice in other threads, I downloaded the whole 1.7Gb WAIK, just to get hold of imagex.exe, which i then put on the memory stick. As the bootable 'recovery CD' does provide a command prompt, I could, supposedly, 'apply' the image base.wim, which is also on the stick, to 'drive D:' (under these circumstances, that's the main partition). But as there's lots of other stuff on the stick (like FactoryUpdates), I'm afraid it will be a lot of hassle installing computer-specific drivers and stuff.
I want to buy a new laptop. The problem is that new laptops come with a tonne of crap on them and I want a clean install of Win7.What would I need to get this clean install?Would I need to *cough* acquire an OEM edition of Win7?
I installed Windows 7 on one of my computers. I have another computer running Vista. Can I uninstall Windows 7 on my first computer and then reinstall Windows 7 on my other computer?
I reinstalled Windows. When it was done, the internet disappeared! It says "Not connected - No connections are available". I try to troubleshoot it and it says to install a network adapter driver. My router is Linksys WRT54GS and my modem is ubee.
I had multiple BSOD's on my laptop, i had to reinistall windows 7 because it could not boot up. After reinstalling and adding all drivers I got another blue screen.Please find attached the dmp file.
I decided it was time to perform a clean installation. I just got my computer last year and I've never done it before. I have 2 hard drives, each 1 TB. My primary hard drive is partitioned. The first 882 GB is the Local Disk. It has everything on it, the OS, programs, data, etc. The other 48.8 GB has the Windows 8 pre-release installed on it. My secondary hard drive is used for backup. I use the default Windows backup program. I'm currently performing a backup and I plan on creating a system image after that. Once those finish, I'm going to partition my primary hard drive again for the new installation. How much space do I need to give Windows 7 on a partition?
I was also wondering what to do after reinstalling Windows. Do I restore from the system image? I thought reinstalling Windows then restoring would defeat the purpose, wouldn't it? Also, what do the backups and system images cover? Should I just manually copy my programs and data to the internal backup hard drive? I just that that moving programs from where they installed then moving them back might mess some things up. I read somewhere that it would be smart to reinstall all programs. I wouldn't mind doing that, but there's one that concerns me. I'm a PC gamer and I use Steam. My Steam folder is almost 200 GB, please tell me I wouldn't have to download all my my games again...
i reinstalled windows 7 64bit a few weeks and since then ive been having startup problems. BSOD, restart during welcome screen, freeze on starting windows screen etc.need to know if its a simple fix or should windows be reinstalled or is it a hardware issue?
Windows 7 Home Premium X64 keeps re-installing the same existing USB drivers every time I plug in an USB device. This means every time I plug in my Wireless mouse, my printer, scanner, external hard drive... and so on I have to wait minutes before I can start using the device. Also, it does not just re-install the drivers from the hard disk, it does a lengthy check via windows update before it installs anything.
Used RT Seven Lite to slim down windows, but may have done a little too much in terms of removing Windows services (RasMan, etc.). Is there a way to reinstall the Windows components?I did try to manually create the services using sc create and trying to duplicate the service from another box, but so far it hasn't worked out that well
I am running Vista basic and Windows 7 ultimate on my pc and i was just wonder how can i reinstall Windows 7 while keeping vista and not changing anything on my C: drive ( which vista is in ) while just getting rid of Windows 7 and putting a new Windows 7 over that same hard drive ( hard drive D: ) . Is there any way of doing this and without causing any problems to vista, my pc and not having conflict's ?If so can you please tell me how to do it step by step?
I got windows 7 pro 64-bit though my school for only $30. It said it was only an upgrade. I also purchased the backup disc.BUT I downloaded the .ISO, wiped my drive, installed it, and it activated just fine, no errors.Now I just reinstalled it on a different hard drive, and its giving me the error that it is an upgrade only. This is using the same product key that worked before. I did this on another friend's new build and it gave the same error. I talked to a representative that said I should not have been able to install in the first place.I tried calling to activate, but when it gets to the product key, it will not recognize the numbers or letters when I try to type or say the key.I used the number 1-866-234-6020. I am getting nowhere on the phone.Can I get this product key activated for a full version anywhere? Any specific numbers I have to call?I have a disc of XP retail version lying around. Can I install that and upgrade using my backup disc
Just reinstalled Windows 7, walked away from the PC during the re-installation and it appears that a second partition was created in stead of overwriting the old partition. How can I start up the PC and delete the old OS? Or should I just re-install Windows 7 again and be at the PC when it goes through the steps?
Recently I decided to reinstall windows 7 without wiping my hard drive, but I ran into a problem. Everything was going smoothly until it reached the transferring data and settings. It went up to 72% and hasn't changed for an hour. If I try and close it down it simply says that it can leave the PC in an unstable state.Here is an image of what I'm seeing: and the number hasn't changed, and it is always changing from please wait to Transferring files imgur: the simple image sharer
Specs: Windows 7 home Premium 64bit 6570 (amd radeon) I5 2400 8gb of RAM 600W power supply (for future upgrades)
