I have tried several times to figure it out and can not. I don't have internet access cause all drivers were lost after doing a complete reinstall of Windows 7. All my drivers are missing or not attached to devices.
I wish to get to the bottom of. After a system recovery last October on my Hewlett Packard PC due to some software causing blue screens, I have just discovered after defragging my main C drive, I have noticed that the "D" partition which holds all the necessary recovery info is just 2% defragmented. As nothing is written to this part of the disc I wonder how this has happened, unless it has always been like that. Usually when I do a recovery, I immediately turn off the "auto-schedule defrag" program so I can do it whenever I wish. But this time I didn't and obviously the auto-defrag has scanned that part of the drive at one time and reported a 2% fragmentation. It may well have been made like that! Or would it be worth a quick defrag just to get everything in order? The OS is Windows 7, and it is a single 640Gb hard disc.
I run the system recovery with the build in recovery partition from Sony but the installation cannot be completed due to the hard disk failure. I want to replace with a new hard drive but also want to keep the original recovery partition because there is some useful software that is included. I have a external adapter to connect my hard drive through USB to my computer and have a software to recover the data in the recovery partition.
I recently installed Ubuntu and my Windows 7 partition converted itself to SFS. I want to know if/how I can use the recovery ISO in a USB flash drive so get my partition back?
I am running Windows Ultimate 32 bit. I have 2 SATA Hard Drives (one with OS), 2 SATA DVD and Blu-Ray Drives and 1 IDE Hard Drive which is configured as a slave.Second - I needed to do some hard drive trouble shooting for another computer that had a (possibly) dead IDE Hard Drive. To do this I shut down my computer, and attached the (supposedly) dead IDE Hard Drive in its place.Now - all the trouble began.After booting into the Bios, I noticed the supposedly dead hard drive did not register even though it was spinning. I kept booting into the OS to see if it would be recognized in any case - it was not.I put my working IDE Hard Drive back in - after shutting down and removing the dead IDE Hard Drive.I booted back into the BIOS and noticed my good IDE Hard Drive wasn't being recognized either. I then went into advanced Bios settings and walla - it saw my hard drive but said I needed to reboot.After rebooting I noticed the same thing with the Bios, but this time proceeded to boot into the OS.After signing on, I noticed my Good Hard Drive was no longer recognized in Explorer. I went into Administrator and Computer Management and then into Disk Management.
The hard drive on my netbook is unreadable, so I cannot access the recover partition. I bought a new hard drive. Can I download windows 7 starter from the manufacturer website? My netbook is a dell inspiron mini.
I have Unallocated space at the very end of my hard drive, even after the 25gb Recovery Partition, this is due to copying my old hard drive onto this new one via Clonezilla, and it automatically keeping the unallocated space at the end. Can I either move the unallocated space around the Recovery Partition, or delete the Recovery Partition altogether? Sorry if I am being a little unclear.
I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
is not empty - it is almost 80% full but when i click on it there are no files. Tried - to the extent of my knowledge - to see if the files are hidden but didn't reach anywhere. Tried a restore point but that didnt work either.
I am trying to delete the recovery drive and use all the c and recovery drive with windows 7. I do however want the Toshiba extras that come with it, well some of them. I also would like to use the windows experiance ratings.
My daughter has a Dell XPS with Windows 7 on it. It was having alot of issues so short verision after several house with Dell support they told me I would have to tell the computer to go back to the factory version. I followed the steps told to me and now nothing works. When I turn the computer on I do get the Windows word to start then a flash of something that could be an error message of some sort but its not there long enough for me to be sure. I then get something about I need to run a repair, which I do but the repair doesnt work. I tried putting the original install disk in the same thing happens. I have been told to try getting the recovery partition to open but I dont know how. Does this sound right? If so how do I do that and if not what should I do.
I have a Asus k52jc laptop with windows 7 home premium pre installed. Now I cant recover my windows installation using recovery partition.It does not appear in the boot menu. But i can see the partition is still there. I cant create a recovery disk either.
just want to know if it is safe to delete the recovery partition so i can unlock more gb in my hp notebook. when i first bought it, it was with vista preinstalled. so the recovery partition is vista, but i did make a complete rescue disk of my computer the first time i turned it on with windows recovery. so my question is, is it ok and with no problem, that i can just format the recovery partition, since i actually never use vista, but windows 7. it wounldt mess my laptop??
Made the mistake of deleting this partition, and really regret it since it would of been handy to have if i install win 7 again. So feeling bad about that. Any way i could get a PQSERVICE (a recovery) partition back on there?
My sister just got a new laptop with 7, then accidentally installed a friend's version of 7 on top of it, thinking it was Microsoft Office. I'm trying to restore to factory settings so she doesn't lose all the software that came with the computer.
I know the recovery partition is on the computer (I made it appear by assigning it a drive letter). But I cannot boot from it (or whatever I need to do to access it).
I have tried the following:
1) Advanced Boot Options -> Repair -> System Image Recovery: no system image -> System Restore: no restore point
2) all possible F# keys at startup, including F10 which got me to Edit Boot Options, which seemed hopeful because it named the partition number, 3, but did not allow me to change it (the recovery partition is 2).
3) F2 -> setup (nothing there)
4) burning an iso of Windows 7 recovery disc, which just gave me the same repair tool as in the 1st attempt.
5) setting the recovery partition as "active" (in fact, I think it was already active).
I recently upgraded my Acer 722 netbook to an 265GB SSD and installed Windows 7 on it. I was wondering if there was a way to create a partition for a recovery environment (just in case something happens). I have a system image of this pc saved, however I feel it would be best to also create a recovery partition.
I am using dell insipiron 1464 model with preinstalled windows 7 home basic os.i have lost my installation cd.now how do i take backup of my os in separate dvd or usb drive with the help of recovery partition.
I've been to their chat they said if I install Windows7 It will erase/delete my recovery partition.. is there anyway i can avoid this? I'm making a recovery disks right now will that help?
Ive got a dell xps 8300 that came with a recovery partition on the hard drive. Its taking up about 19 gigs of space and is not needed as I use recovery software on my machine. I want to format this partition and merge it with the rest of the C: drive. How do I go about this. I have tried right clicking on the partition but the format choice is greyed out
I have a Sony Vaio VPCEC4SOE I bought cheap - needs a new screen.After purchasing first thing I done was a Reinstall of windows using F10 on boot up and following instructions.However after all finished Task manager showed 90+ processes at idle and the amount of bloatware was more than I had ever seen included with any PC.So, Made up a Windows 7 Install disc as I wanted to go for a totally fresh install. Once installed it asked for product key - I checked underneath and half of the sticker is missing (I know I should have checked before hand!) Plus thinking about it after I really don't think the product key can be reused even if it is on the same machine (can someone confirm?)I now have a nice clean operating system, but no product key, that will self destruct in 27 days! So I would like to return to VAIO factory state. I have checked and recovery partition is still there and intact - 13gb, but how can I reinstall from this partition? F10 now does nowt on boot up.
I'm upgrading a Compaq Presario running XP that has a recovery partition installed by the manufacturer. It's my understanding that the recovery partition will be useless after the upgrade. Should the drive be reformatted and the partition deleted?
I have not backed up my system for 2 years, last time it was brand new with vista, now I have win 7. This partition is taking up a couple of gigs of hard drive space. So is it OK for me to wipe this partition clean? Does it auto-save stuff on it?
i've fitted a new hard drive into my laptop and want to get rid of the recovery partition on the one i've removed.I've formatted it via Disc Management but the 15gb Recovery Partition remains there. Is there a way to format it so that i get the maximum amount of disc space.
I had got some virun problem in my HP laptop so that I use a recovery partition in order to install Windows 7, but unfortunately during installtion the system stucked and I think my recovery partition is also corrupt. Now I want to install Windows 7 without using recovery partition and want to use my own Windows OEM key but the question is that how can I get my Windows 7 product key from my recovery partition, actually the sticker on the bottom of my laptop wipe out as well as I cannot run keyfinder program because I couldn't login into my Windows. Is there any possibilities that I can get my product key from my recovery partition.
Just want to run something by you guys before I install my compy of Windows 7 Ultimate on my laptop.
I have a Fujitsu-Siemens Amilo Xi 2250 with Vista Home Premium. When I got the laptop I created the restore DVD:s (3) and have since then used them a couple of times.
From what I've gathered reading trough this and other forums, and from my own knowledge and experience it should be safe to remove the recovery partition from the HD right? Or could I run in to some kind of problem if I'd like to go back to Vista using my recovery DVD:s and the partition is not there? As I understand it if I for example had a Dell it whould be ok, but could it be different on my computer? Or do these recovery-partitions always work the same way?
Also, if I decide to leave the partition there and I do a clean install of Windows 7 will this do anything to the restore partition? Cause in that case I could just leave it there right?
I have tried to Delete my Recovery Partition on my Acer Netbook but it doesn't work. I have the boot files on the C: Drive. My Recovery Partition has nothing on it.
I have used the cmd
select volume 1
active volume 1
delete volume 1
and than cmd freezes up on me and all i can do is close the program or check for online solution
than after i try
select volume 1
active volume 1
delete partition
i get an error:
"Cannot delete a protected partition without the force protected parameter set."
I have also tried to go in the Disk Management section and delete the Recovery Partition but when I select it, I can only click on settings.
How can I make the Recovery Partition become usable?