my dvd /cd drives in my dell dimesion pc areshowing unknown tryed auto find cd drive works ok then lose them when i turn on my pc the pc screen starts ok the monter pc wor ok its just th dvd/cd drive tryed f 12 and even f8
View 1 RepliesI have a Toshiba Satellite, A305 S6905 with a New Install of Windows 7 Home Premium 64 bit.Bios was updated to latest 2.20 version. I put two new, matched 2 GB ram modules in it. It does not show but 2 GB installed even in the Bios. I checked both modules by putting each one seperately in the primary ram slot and both were showing up as good. I even put the old 2 GB and 1 GB modules I had before under Vista and it still only shows 2 GB installed.It only shows 2 GB installed and 1.87 useable..It boots OK and seems to run fairly smoothly but I have not put it to the test under some memory hog programs yet.
View 9 Replies View Relatedmy adaptor is new but not showing in bios.
View 1 Replies View RelatedSo I am here because I am having some hard drive problems. Firstly for my Primary drive i am still running my old 250gb Hard drive (with windows already installed on this drive). Secondly, for my slave drive i have a Samsung Spinpoint 1TB Hard drive that wont display in my bios or in disk management. The 1TB drive seems to spin up fine etc. but i just can get it to display. i can format this new disk. Also i must add that my motherboard is an ASUS p8z68-v-pro board.
View 9 Replies View RelatedI'm trying to install Dell Studio 1535 Bios drivers from A02 to A06 , but i get error : Error! The BIOS update could not be performed ,because a valid ROM image file could not be found . If can it be , because Windows 7 can't read this driver?
View 5 Replies View RelatedI've wiped the HD, Prime tested the CPU, and Memtest + the RAM (all via UBD)
I've installed Windows 7 Pro x64 (which I would like to stay with, but I have the option to use x86).
I can install and get to the desktop, but whenever I restart I would get random BSOD; everything from memory errors to driver errors. However, another restart and everything fine. I download drivers from the Gigabyte site and installed the ATI display/chipset driver (restart BSOD, driver ACHI.sys?).
I upgraded the BIOS to F3 via QFlash(BSOD rdyboost.sys) Now I even tried to put in my win 7 disk and preform a repair and I get a NSFT.sys STOP 0x00000024. I've tried multiple different installs and wipes and now I'm getting a sector error in Boot & Nuke, but Seagate tools says everything is fine.
Final note for today. The HD I'm using was in a ReadyNAS Duo for 1 year and the last SMART check I did before pulling it from the unit said it had 2 unallocated errors, far below a damaged drive. I do not know what todo. I will try another wipe and install this time using the Gigabyte SATA drivers (preload) although why would the system be able to install with generic drivers if I needed to do this.
HTPC:
GA-MA785GPMT-UD2H (rev. 1.0)
- BIOS F3
Athlon II 245
- stock
G.Skill DDR3 1333
- stock
Seagate 500GB
Antec 380W PSU
Can any one tell me what bios drivers do i need for windows 7 i cant get my graphics card drivers to install can anybody shed some light.
View 1 Replies View RelatedMy Windows 7 64 bit computer has started locking up. I start it in safe mode and disable the sound card, which seems to sort of sort it out. However, when starting in safe mode, the lines on words on the screen duting boot up mostly include/windows32.Does this mean my machine is trying to use a 32 bit version?
View 3 Replies View Relateddevice manager showing coprocessor without drivers cant find what its supposed to be updates won;t install downloaded all relevant drivers from asrock and nvidia but still no luck .anyone any ideas what this could be?
View 9 Replies View RelatedI recently bought two Sandisk SSD's to run in RAID for my rapidly aging computer. I'm currently installing windows 7 (x64) on my new drives and I get the "no device drivers found" message that has haunted me in the past. I remember previously I resolved this issue on my Samsung F1 by setting the drive configuration in my BIOS to IDE, of course, this is not possible now as it must be set to RAID.
View 4 Replies View RelatedI have a Sony Vaio Laptop with Windows 7 Ultimate 64bit Model VPCEC1M1E. The problems that I am having are: The ATI Display driver stops responding and the screen goes blank, Also the optical drive is no longer showing within windows, and it will no longer open. I have tried lots of different ATI display drivers for the laptop however none of these have worked I have also tried clean installs but this did not make any difference. I have had a look through Event viewer and one error that seems to be a cause for concern is:Event ID 13: The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS.In some situations, this error may cause the computer to function incorrectly.
View 5 Replies View RelatedI've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies View RelatedI have a toolbar on my taskbar titled "Programs". It has about eight folders in it. I made another toolbar, and placed it directly adjacent to the Programs toolbar, to obscure the eight folders and force it to be a dropdown menu.Trouble is, as soon as I lock my taskbar, right next to the arrow that displays the eight items of my Programs toolbar in menu-form, one of the eight items is showing up as an icon, as if the other toolbar isn't close enough to the Programs toolbar in order to completely obscure the eight items.
View 2 Replies View Relatedi protected password for my pendrive it is kingston 4gb then it showing 3.75b, but in properties it has been showing 576 kb how to get my original size (3.75gb)
View 1 Replies View RelatedI have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
View 14 Replies View RelatedMy Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
View 3 Replies View RelatedWhat are the types of BIOS over years up to present BIOS types ? What make each BIOS unique and better then the previous ?
View 3 Replies View Relatedi want to update my bios ( i have asrock motherboard N68-VS3 FX ) and i am a gamer who interested in performance i have bios ver 1.20 can i use the last bios update 1.70 ? or i have to download all the previous updates first what i mean is the update cumulative?
View 11 Replies View RelatedNew system build with Gigabyte GA-990FXA-UD3(v1.1), AMD FX8350 4.0Ghz/8coreVertex4SSD, Gigabyte GeForce GTX660 2GB video, 500wPSU, Win7 Home Premium/64.System ran/loaded/updated fine for about 6 hours then crashed during game play.BIOS/Windows unable to recognize SSD, unable to re-install Windows - get as far as "No drives were found. Click Load Driver to provide a mass storage driver for installation"that is followed by:"To install the device driver needed to access your hard drive, insert the installation media containing the driver files, and then click OK"I have burned CD\DVD's and USB flash drive files for a couple of days now looking for the "device driver", but I still hang up at the same screen.I have switched SATA/power cables, reseated memory (crucial Ballistic 2x(2x4)DDR3 PC3-1(16GB total)/video card, installed a WD Caviar Black 1T HDD (not recognized), (re)Flashed the BIOS to F9 from the Gigabyte sight (system had the most current version/flash was successful - no problems with that)but.
View 3 Replies View RelatedTried pressing DEL ESC f2 and basically every key on the keyboard during startup.. but no BIOS..
View 9 Replies View RelatedAs I mentioned how can I update my BIOS version I download the latest BIOS files from the manufacturing site but cant be able to update it.I have HP Compaq dc5850 Small Form Factor PC and My Current version of BIOS is 2.1 and update is 3.3
View 9 Replies View Relatedhow do you flash a bios for a motherboard using a usb?? I have an Asus P5KPL-CM and need the lastest bios cause it fixers a problem i have with my audio....
if someone could let me know how to go about this i wound be ever so greatful
NOTE: I have the right bios file.... I have no Floppy drive.
Just thought I would mention this as it is the second machine I have bolloxed now due to doing a bios upgrade.
A while ago I did a bios upgrade on a desktop machine and after doing it got a BSOD and windows would not boot. Had to format and do a fresh install to get over it.
This time round I did a bios upgrade on my laptop so that I could put a T9500 processor into it and got the same problem.
Bit of a pig this one though as I have 3 weeks of non backed up emails I will lose amongst other things.
It seems that if you do a bios upgrade windows 7 see's it as a different machine and just errors out without trying to load. There seems to be nothing you can do to recover from it.
Only option I have it to install another oppperating system on it and then see if I can downgrade bios. See if that will work.
Just be aware of this as not something that will show to often as not to common to have to upgrade bios. Hope this helps someone.
i never flashed bios before and have recently noticed there is an update on the Acer web site. The bios mine is running on at the minute is R01-B3 and the new one is R01-B4.
Is it worth updating to the new one?
Will Win 7 take to it?
What will be the benefits of the newly released bios over the one I have?
How do I go about doing it and are there any safety precautions I could take so I can roll back incase I F it up?
my laptop is vaio VGN-FZ31Z, is there any software i can use to update the bios?
View 5 Replies View RelatedI have two SATA hard drives. I was poking around in the BIOS yesterday and noticed that they were setup IDE instead of AHCI. I am not sure what either does and did not want to change anything without asking. When I first got my PC, it had XP installed, so I am thinking that is why IDE is set. Do I need to change it to AHCI? I am not having any problems. Would it be of any great advantage to change it? I understand that after the OS is installed, it is a problem to switch to AHCI.
View 4 Replies View Relatedhow to set bios to from CD. I have dell computer
View 3 Replies View RelatedPC does not boot to the bios.. motherboard is z68x-UD3H-B3F10
View 9 Replies View RelatedI was updating with sp1 and some other updates and when it rebooted the 2nd time it got stuck on the motherboard logo so when I tried to boot with my Window7 disk "nothing" I can not boot into my BIOS so I guess I should go down and get another motherboard? I just put in a new SSD drive and loaded my Windows from scratch a couple of days ago so I hope I haven't lost 10 hours of work?
View 3 Replies View Relatedmy computer when being booted up sits for about 30-45 seconds then goes to the welcome screen and turns on. My BIOS will not work. I need to change my primary graphics adapter and apparently need to do it in bios since its currently disabled. Does anyone know how to fix this? Ive tried pressing the keys to open it and it does nothing. When I force shut down my computer and you would receive the startup menu recommending safe mode etc my keyboard lights up and if I press enter it will bypass the 30 second count down before starting up my computer, but my monitor does not identify until the welcome screen and BIOS will not start.
View 2 Replies View Related