No Video On Specific Display?
Oct 26, 2011
There I was trying to show off my HTPC to the INLAWS (darnit), and I get no picture when I enter Windows.This rig has worked perfectly on a 42" Vizio for a couple years now, but the only way I can get windows to display is in safe mode (not even low-resolution). The HDTV I am plugging into (HDMI) is a 40" Phillips. To make an odd thing even stranger, in dual display mode, if the TV is on a different input (such as T.V. or Xbox) I can see the computer recognizing it, modle number and all. The second I switch to the specific HDMI imput computer loses detection.
View 1 Replies
ADVERTISEMENT
Nov 2, 2012
i want to stream a specific video program to my computer. their specs say that abobe flash player on 64 bit is not compatable. i have windows 7 64/32 bit. will this work. or what do i have to do.
View 1 Replies
View Related
Nov 2, 2012
i want to stream a specific video program to my computer. their specs say that abobe flash player on 64 bit is not compatable. i have windows 7 64/32 bit. will this work.
View 4 Replies
View Related
Jan 26, 2012
I recently built a new computer (specs below) and have been having intermittent issues upon power on/restart with my monitor displaying 'Cannot Display This Video Mode' and above that 'Optimum Resolution 1920x1200 60Hz'. I may have to power off/power on the computer one or two times before the computer loads completely to windows 7 login. Other times - the computer starts completely fine. As this is a fresh build (1 week old), I have loaded all the newest drivers from the appropriate websites.I have no problem playing any games in their highest settings (SWTOR, BF3, WOW, ETC.) and have no issues with anything once I can make it to the windows login. I have been reading forum after forum to find a solution to my problem without any luck. I read that unplugging the monitor may help the issue, and the last time it gave me that video mode message, I tried that - and it worked. I am running the monitor (DELL EF248WFP in 1920x1200 resolution, 60Hz) through the DVI connector on my MSI HD 7970.
ASUS P8P67 Deluxe
Intel I5-2500K
Corsair Vengeance (4x4GB)
MSI HD 7970
125GB SSD (Windows 7 - Boot Drive)
1TB Seagate Barracuda 7200RPM
Monitor: Dell E248WFP
View 7 Replies
View Related
Jan 7, 2012
I have a HP Pavilion DV7T. It came with 2 video cards, an intel integrated card to save battery life, and Radeon card for games. The problem is, when running Skyrim the game looks for the video card listed in DirectX. My Radeon card is working, but not showing up in the dxdiag. How to get the Radeon card, or both, to show up on the dxdiag? I have uninstalled and re-installed the card. I have the most recent drivers, and tried older ones. Both cards show up in the Device Manager, the integrated card is listed first.
View 2 Replies
View Related
Nov 5, 2012
i cannot find any information on across the internet.things to know:
-i am using an acer aspire m3802 on a windows 7 os
-750gb storage space
-4gb ram
-i use an nvidia geforce gt 230 graphics card
-both disc drives are nearly full
-i have recently installed two video editing programmes (30 day trials)
-for about half a year my computer has had minor glitches when playing Internet videos or music
so i was on the surfing the internet and my monitor suddenly goes completely black. the fan was still going and the lights were still on, but i couldn't interract with the computer because i had no display whatsoever. about an hour beforehand i had been converting some hd video files, which was probably using up a lot of memory, and i had been skyping too. the computer had been running a lot more slowly over the past couple of days, but had shown no signs of being about to break. so i turned the computer off and then tried to reboot it. the acer logo appeared, but after that nothing else happened, not even the 'start windows normally' screen. the mouse still lit up and the computer seemed to be alive, but it downright refused to display anything at all. when i briefly tilted it, however, the display popped up for another millisecond. i tried rebooting this morning, at which point the 'acer' screen briefly flashed up. i managed to start it up in 'safe mode' and the core features of the computer appear to be working. however, when i tried to access the internet, the error '0x80131018' appeared. (this may be completely irrelevant but every piece of information helps!) so we can basically rule out that the monitor is playing up, which makes me wonder how far inside the computer the problem is hidden.
View 1 Replies
View Related
Mar 31, 2011
This is on a fairly new HP G72 running Win7/64. A soft drink was spilled on the keyboard, system ran fine after cleaning it up, then performed a scan and found malware. Removed the malware, rebooted and system boots to user logon no problem. After you log in, the screen flashes white for several seconds, then goes black/white quickly and then all black: no cursor, no nothing. A few seconds later you hear the Windows startup song.Connect an external monitor and you see the desktop perfectly. System shows no problem with driver, all settings look good, system can see both an LCD screen and the external as disply devices. Use the Fn-F4 key to cycle througn video outputs and it goes blank-blank-external. Once you get past the logon screen in Normal mode the LCD goes blank but the external VGA works a treat!Boot into BIOS, let it run 15 minutes and never lose the display. Boot into the Recovery Console and let it set and poke around for 15 minutes and it never lose the display. Boot to Safe mode and poke around for 15 minutes and never lose the display. Boot to Normal mode and after you logon the screen goes black but with the external VGA working perfectly.
Uninstall the video drive (Intel HD), delete the driver on the system and boot into Normal mode: the LCD works perfectly, no problems other than 800x600 resolution and 256 colors. Install the latest & greatest video driver for the system from HP, reboot to Normal mode and the screen goes blank after logon but the VGA still works great. In frustration I do a destructive restore, taking the system back to new-out-of-the-box condition and still get the same problem.Only thing I haven't done yet is a HDD reformat and OS reinstall from recovery discs. Trying to avoid that so I don't lose the recovery partition. Don't know if this is a rootkit/bootkit problem but my next step is to try rebuilding the MBR and BCD. If that doesn't work all I can think of is reformat/reload.Doesn't all this look like a software problem? I want to think it's hardware (remember the soft drink spill) but if the LCD video works in BIOS, and works in Recovery Console, and works in Safe mode but *only* fails in Normal mode with both the OEM and latest drivers, doesn't that really point to the OS?
View 5 Replies
View Related
Oct 23, 2011
I have been experiencing a sporadic problem with video playback for several months now,If I watch enough (locally saved) videos consecutively without restarting my computer, at some seemingly random point, the media player will stop displaying the visual component when I open new ones. Once this happens, the problem will persist until I restart the computer. Each time I try to open a new video file, the player will briefly expand to the proper display size as if the video portion is going to come up as it should, and then the player will just revert to the small size it would as if it were just playing an audio file. And the audio continues to work properly, but I won't be able to get the visual component to work until the computer is restarted. Interestingly, I can continue to watch videos embedded in websites without any problems, just not anything saved to my hard drive(s).
Generally, I use VLC Media Player to play music and watch videos. But once the videos stop displaying properly, I get the same results regardless of which media player I try to open videos with.Other than that, my desktop runs perfectly. I generally have lots of applications opened up simultaneously, so I leave it on pretty much all the time (except when I have to restart it to fix this video problem). Although I haven't noticed any real pattern to when videos files stop opening properly, I would say I can usually open an average of about 20 videos before the problem occurs. It seems like I'm able to extend that number if I pause videos before they finish or if I open new ones while another one is still playing. But if I play audio files or let the videos play out to the end (when the video display minimizes), it seems more likely that the next video I open will cause the problem to reoccur.
View 3 Replies
View Related
Jan 27, 2012
I just built a new computer and first couple boot ups everything worked fine, but when I tried it the next day I got "Cannot Display Video Mode"and then after the system reset itself the screen looks all messed up with these weird vertical yellow dotted lines. I've tried reinstalling the drivers nothing works. System says Error 43 and it stopped the video card. There is no integrated video on my motherboard. After installing drivers it does the same thing before, I have tried doing clean installs.
View 4 Replies
View Related
May 3, 2012
Recently and all of a sudden (perhaps after using a VGS projector) when i boot my laptop i do not get any video display - not even my TOSHIBA POST or the "starting windows" screen. But when the boot gets to the login screen it dispalys on my laptop and from thereon everything is fine and normal
If i connect an external monitor or projector i can see everything right from the very beginning on the external monitor such as the TOSHIBA POST and the starting wndows etc. When the login screen appears the dispaly from the external monitor dissappears and the dispaly returns to my laptop screen after which everything is normal.
View 1 Replies
View Related
Dec 7, 2009
what inexpensive video card for dual display?
View 9 Replies
View Related
Jul 2, 2010
i'm having some trouble with my display driver crashing when video files are played. sometimes the driver recovers, but other times it ends with a bsod.i am running windows 7 x64, 4gb ram and a ati radeon hd5870 with up-to-date drivers the driver crashes when
- an embedded video, such as on Internet, attempts to play
- during the windows experience index tests (fails during video processing)
- playback of some video files in windows media player (error message states not enough memory)
the video files in the windows/performance/winsat folder for example don't all crash.these all crash in wmp:
clip_480_5sec_6mbps_h264
clip_480i_5sec_6mbps_new
clip_480p_5sec_6mbps_new
this doesn't:clip_1080_5sec_10mbps_h264 they all play in powerdvd 8 and quicktime.the bsod log's also point to one particular driver, dxgkrnl.sys the ati driver is up-to-date and i've tried updating directx as well. even tried reinstalling the os over the top of the existing installation.
View 9 Replies
View Related
Sep 12, 2011
I am looking for a video editing software that allows changing orientation of video display by 90 degrees.
View 3 Replies
View Related
Oct 27, 2012
I am using Windows Live Movie Maker 2.6 running in Windows 7. I have found that when I try to save my completed movie "For high-definition display" it will not be savedThe saving process stops sometimes at 13%, 27% and even 99%. My computer freezes completely and I have to switch it off and on again manually. However, it will save in "For computer" setting, with no difficulty. I have noticed it only when I try to save MOV video clips.
View 2 Replies
View Related
Dec 19, 2011
find the driver for my lenovo t60 video display
View 1 Replies
View Related
Jun 26, 2011
That is the message I get right after my videos crash. The whole screen blacks out and turns green. I'm not sure if it is Google Chrome or if it's my computer.
View 4 Replies
View Related
Mar 16, 2011
I got a new video card at work to install and nothing will show up when I plug it in. I can go through the computers VGA and it works fine, but when I go to the video card only a black screen. Any help? Can't download drivers either, only black screen upon boot.
View 8 Replies
View Related
Jun 13, 2011
I have a Samsung RC512 SO2 Netbook w/ Windows 7 Home Premium 64bit.My Computer has two videos cards in it:
1) Intel(R) HD Graphics 3000
2) NVIDIA GeForce GT 525M
Currently it is using the Intel card for my built-in display on the laptop.The max resolution is only 1366 x 728. I am looking for any way to jack up the resolution.Is there a way to switch the built-in monitor's video card to the GeForce, with hopes that it offers a higher resolution?The only thing I could find is a way to utilize the Nvidia card for another monitor if I plug it in, but not for the built-in display of the laptop.
View 2 Replies
View Related
Mar 7, 2012
I have a problem playing live TV using Windows Media Player. I can select different TV channels without a problem. I can hear the audio clearly. However, i can not watch anything as it displays a black screen. I originally used WinTV (version 7, with the newest updated driver and software) and works fine. For video card, I have a GTX260 with the latest version (295.73) installed. I've tried different versions of driver (259.xx to 285.xx) to no avail. When I tried setting up the TV tuner it detects the tuner as Analog Cable (tuner 1) which I assume is the WinTV tuner.
View 9 Replies
View Related
Jul 3, 2012
Display or video driver for Pentium dual core, provide a link..... Because of it the clarity of video is not good and I can't set a screensaver.
View 5 Replies
View Related
Feb 12, 2013
Video card for windows display driver model
View 11 Replies
View Related
Aug 18, 2012
If I am streaming a video online the screen will get fuzzy and freeze. I will then get the blue screen which will mention that there is a problem with my display driver. This has happened many times. I won't be able to do anything after that. I can't even turn off the computer. I just have to wait for the battery to die so that it will turn off.
View 4 Replies
View Related
Feb 14, 2011
So when I try to watch recorded TV programs or watch videos. I get an error what says: Video error files needed to display video are not installed or not working correctly. Please restart Media Center and/or restart the computer. I have restart both. Not work. I have read several forums and update drivers and uninstall drivers and do everything what there has been. But nothing. I have Windows 7 (32-bit), Ati Radeon HD 5670 1gb video card, 4000gb ram, AMD Athlon (tm) 64 X2 Dual Core Processor 4000+ 2.1 ghz (maybe) 2 CPU's. Its been working before and im not do any big changes to my computer. Only thing what i do is that I installed Tom Clancy's Rainbow Six Vegas.
View 14 Replies
View Related
Nov 19, 2009
the display/monitor uses the generic driver for display and it is 1024×768 or 800x600 but it looks very odd it should be bigger because my screen is bigger. I have a acer monitor but is there something I can download to fix the display size?
View 3 Replies
View Related
Sep 22, 2012
Windows 7 64 turns off the monitor 1 signal after startup. At login, it powers off monitor 1 and powers on monitor 2. Windows 7 behaves as though dual display is working even though monitor 1 does not display. It's the same for single display, the monitor will not work on cable 1 except at startup.Both 'Extend these displays' in Windows Screen Resolution and 'Extend' in the Nvidia Control Panel is selected. And changing which one is primary does not turn on monitor 1. Nor does switching the position of display 1 in either (ex.left/right/top/bottom).GeForce 8400 GS; Dual Monitor Solution 59 pin (DMS-59) to 2 VGA adapter -tried two of these adapter cables.atest Driver: 306.23 - installed a clean reset install of the latest Nvidia driver released last week.Same Resolution: 2 of the 4 monitors I have tried have the exact same 'recommended' resolution (1280X 1024), both 60Hz, and even chose 16 bit color for both instead of 32 to reduce resources.
Linux worked: Dual display worked immediately when I tried it in Ubuntu 10. So, it's not the hardware. It works in Ubuntu 12 too but not properly -it won't transfer windows across displays. My Windows 7 64 is an upgrade from Vista 64. One person in another forum with the same problem resolved theirs by reinstalling Windows 7. But another got the same problem only after a fresh clean install of Windows 7 64 with the same GeForce 8400 GS and DMS-59 when it had previously worked in Vista. Dual Monitors - Only One Works at a Time
View 5 Replies
View Related
Aug 12, 2011
how to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?
View 1 Replies
View Related
Feb 13, 2012
I'm looking to block a specific network both wired and wirelessly and wondering if there is a way to do this. I spend to much time on the internet when at home. I can now lock the computers so that during specific times I can't access the home network. HOWEVER I would like to configure one laptop computer so that it can't hook up to the home network at all. Not being able to connect with the network either hard wire or wirelessly. I want to be able to take that computer to other locations though and be able to hook up wirelessly to them. So in other words I couldn't connect to the home network but can connect to other networks.
View 4 Replies
View Related
Sep 10, 2012
I can use my internet just fine except for two specific web-sites (that I know of) that crash when I try to access them. those two websites are: what.cd and utorrent.com. when I type them into the search bar, I get this:This webpage is not available Google Chrome could not load the webpage because what.cd took too long to respond. The website may be down, or you may be experiencing issues with your Internet connection.I know it's not the website because other people I know can access them just fine.but there is an even stranger problem. When I do a google search in the URL bar, usually it works fine. but when I include the words "torrent" or "what" in the search, the browser crashes the same way. I can search for anything else and it works fine. But if one of those two words "torrent", or "what" is included, it crashes..
View 14 Replies
View Related
Mar 26, 2011
Just formatted a laptop, reinstalled windows7 and all of the drivers. My laptop is an Acer Aspire 7738G-6006.
Here's the problem: To get the volume slider on the keyboard to work, I need to install Launch Manager. I found the download on the website and extracted it. When I run setup.exe though, absolutely nothing happens. It doesn't even show up for a split second in task manager.
I tried the same file on another computer and it ran just fine. I installed .Net framework as well as the C++ Runtime Distributable. No change. I've tried to run in compatibility as well as an administrator. I also tried Dependency Walker, it had this to say:
I tried downloading the new IE, no change, even tried DLing the DLL and putting it in the folder and that had no change either.
View 3 Replies
View Related
Jun 4, 2012
I have scanned my computer, with 2 different Anti-Trojan applications, both found many infected items and removed it. now everything seems to be cleaned.Thing is, while trying to load google.com or bing.com - both sites wont load - it just hangs. I tried from 3 various browsers.
View 6 Replies
View Related
May 1, 2011
I have a very odd issue that I cannot seem to figure out how to solve....memory tells me I think have had this problem before with this website about 2 years ago, but I cannot remember for the life of me how I solved it.Basically, the issue is this: I am an avid rally fan and usually check World Rally Championship every day.However, a few days ago I noticed that I would get a "The Connection Was Reset"error in Firefox 4.0.1 when trying to connect to it. The first time, I just thought maybe the site was down. The second day, I thought it was odd so I opened up IE9 and tried it there....it will not load in IE9 either. Then I thought, this is really odd, and tried it on my netbook and then and subsequently the other netbook and 2 other desktops in our house. The three desktops are connected to the net through our router via DHCP. The netbooks are on the same router via wireless DHCP. I tried restarting and resetting the router in case that was the issue, no go - internet works flawlessly on all the other computers and my desktop EXCEPT for that ONE site on my desktop.On both netbooks and the other 2 desktops, World Rally Championship loaded perfectly, so it must be an issue with my PC. I tried clearing the caches and cookies for both browsers, and I restarted this machine twice to no avail.
View 5 Replies
View Related
