I have changed my OS several times from win7 to win8 and then recently I finally use linux 13 which did not complete its installation. I was running it from a DVD and using the live session. I wanted to reinstall win7 but when I reach where I'm to select a partition, nothing is there and I'm told to that no drivers are found. When I run linux live I see the HDD and it content.
Whenever I use Live Mesh, it locks the computerand quits Windows Media Center. Is there anyway of setting it so that I can log out with WMC running and the computer unlocked?
In internet explorer when i open it up and restore my last session it opens up many windows, including my last session, a session i may have had 2 weeks ago and other sessions?
Frequently I notice when using Windows Media Center watching live TV that WMP is running when I havn't started it. Does it run automatically when Media center runs? And when I stop watching TV and minimize Media Center to the taskbar WMP is still running and consuming 8-12% of my processor when idle. What gives?
I have a windows 7 desktop at the office which I leave on so I can remotely connect to it (at home) via VPN. Problem is, after the remote session my Win 7 Desktop logs off, which I find annoying since I leave open documents as is for my work the next day. How can I disable this feature?
In IE8 on Windows 7, clearing cookies via Tools -> Internet Options -> Browsing History/Delete... only deletes cookies with expiration dates, leaving all session cookies (those that expire when the browser is closed). The only way I've found to delete the session cookies is to go through Developer Tools and select Cache -> Clear Session Cookies. So it's a 2-step process in completely different dialogues to clear all the cookies and get a clean slate. As a web developer this is extremely annoying. I understand there are some utilities out there for dealing with this like ccleaner.
IE8 on WN7 Pro 64, Standard user, IE8 shortcut in task bar opens a session with my favorites and options as I tuned them. All is well. Now, if IE8 is not open when I click on a link in email or any other place including thumb drives WN 7 starts a new IE8 session in a freshly opened window, however no favorites and no options I set, just the options as per the first time one uses IE8. In fact I get the first use welcome screen. How do I get a link to open IE8 in a fully functional and tuned IE8 session? OBTW my IE8 version is 8.0.7601.17514.
Is there session saver for IE 9? My box is windows 7 x64, and I need to save session with tabs. When I cleaned garbage files with ccleaner or other tools, I could not open the session with "about:Tabs". If there is something like session manager of FireFox.
I have connected to my PC using teamviewe and restarted my pc, and i was unable to connect to the session, as my pc didnt restart it just shut on saying 'Force restart' or cancel' but shut down teamview.
Migrated to Win 7 from XP Pro.I have client VM's that I need to monitor from time to time. In a crisis I might have to open 100 RDP sessions at one time. I could do this in XP with a paging problem. This is one of the reasons I built this monster. I now have 6 monitors and 12 Gig of ram.Alas I can only open 15 RDP sessions at a time without having Windows 7 attempt to scan for viruses.Also is there a way to globally set ( or preserve ) the Registry data for RDP network connections.I have never been able to find a way to migrate a section of the registry from one machine to another.I have to enter in the user name and password for each of these users again. 200 plus.
My issue is that I am trying to Remotely Login to several computers that are in various locations, and then have these remote compters VPN to other networks so they can process some data. I can connect to the computers remotely jsut fine. I am also using NCP secure client to VPN to the works network. However the NCP session on the remote computers say they are connected, when I try to connect wiht my oracle client to the server I get an ora-12154 error as if there is no vpn session to my works network.
My machines are all Windows 7 64 or 32 bit. They all are connecting to the network using NCP client. I am remotely logging in to them using LogMeIn.com (Also tried the windows remote session).
Just thought I'd pass on this slightly dirty fix for no session manager in IE9 I'm using Win 7 x64?IE9 only offers to restore your session automatically at startup only if IE crashed.Here's a 1 line batch file that kills the IE process so that when you start it again it offers to restore your last session. I put the shortcut to the batch file in my quicklaunch toolbar and just needed to get in the habit of closing IE via the shortcut.Here' the contents of the batch file...
i tried excess my download folder in 'my documents' there were short cuts created for each folder which was previously not there.these short cuts were not eccesible "excess denied" my nortan antivirus program detected a trojan horse (vircure 32 exe.). there are unknown new files (ntuser.dat) created too. when i tried to delet tthe massage " if deleted windows or a program may not work" apeared. i have not done anything yet.
How do I configure Windows 7 to lock my RDP session only (but not the console session) after predefined time of inactivity (idle)? By default Windows 7 does not disconnect or lock RDP sessions.
Thinstuff F.A.Q | Support Topics - Config RDP timeout. Disable Remote Desktop Auto Lock Screen on Idle - Lock via Screen saver. How to Disable Lock Screen Using Group Policy | eHow.com - Lock via Screen saver policy.
I just downloaded internet explorer 9. Previously, I was using IE8. Every day, when ie8 would open up (it would load automatically at startup from AOL IM), I would go to Tools -> Reopen last browsing session, and all the tabs and pages I had open when I closed my previous session would load (though in reverse order left to right, annoyingly).Now that I'm running IE9, when I go to Tools -> Reopen last browsing session, the option is greyed out - it does not work. The only time it works is if I close IE9 and then reopen the browser without rebooting. If I reboot, which I do every day, the option is not available like it used to be in IE8. (Seems like every time I download an updated version of anything anymore, something inevitably stops working or is worse than it was before - this soooo tiresome.)
I've tried a regedit I found somewhere on these forums - setting for 'turn off reopen last browsing session' to 'disable'. Didn't work.I do not have IE9 set to delete my browsing history on exit.I have the box checked for Automatically recover from page layout errors with compatibility view.
I am trying to install Windows 7 on my Acer Predator 7750G but everytime the first installation phase stops it says that it cannot configure my computer so the installation will stop.I have had some virus problems on my HDD were i couldn't see what was on them, that is the reason why i have choosen to install from scratch on the computer!
In windows XP perfmon asked every time I wanted to close it if it should save the settings / session. In Windows 7 it says nothing and I see no way to save all the counters I've set up. There is an option to Save Settings but I see no option to load them back. Basically I want Performance Monitor to startup as I left him the last time. Any hints?
BSOD: The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000, 0x00000000) I'm getting this on a shop system running Win 7 Home Premium 32 bit. The last thing I did was shutdown before going home and I believe it installed an update then shutdown, so I'm suspecting the update caused the problem.
I can't get into the F8 Safe Mode screen to try Last known good configuration so I think I'll try a System Restore from the install DVD. Does that sound like a good approach?
I don't have the specs with me but I think it's a 2.8Ghz Dual core Intel with 4GB RAM and two SATA drives. It's been running fine for about a year.
I trouble shot an issue with RDP that has me to believe the sollution lies in somthing to do with printer settings in Windows 7.Affected computer RDP's sucessfully logs into a load ballanced terminal server farm, several moments into the session being established I am getting the "Remote Desktop stopped working" dialog box.This issue is localized to this single computer and is fixed by unchecking the "pinters" option in the remote desktop settings. this computer acts as a print server to a small laserjet printer, all other computer on this small LAN can successfully print to this printer from their local desktop or while connected to RDP sessions. I have tried : Rebuilding RDP desktop icon for user. New Local machine user accounts. starting/stopping Print spool services. USB and LPT1 cables (currently on LPT1). I'm 2 inches away from backing up this users data and giving them a new computer. It doesn't make any sense
I have not been able to get any email on my [url]..addresses. My verizon mail works and some of my hotmail accounts work. Also, I can't seem to get onto most microsoft sites.
ive been getting BSODs and finally figured out how to debug it with WinDbg (x86) and set the symbols for windows but i cant read the text. ive tried reinstalling my GPU and Java but no luck. when i try to run intel driver update utility as soon as i run it i get a BSOD ive got the minidump here if anyone knows how to read it, so here you go.
Microsoft (R) Windows Debugger Version 6.2.8400.0 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:UserskalyeDesktop�81212-36504-01.dmp]
Very recently I started having a problem with the remote desktop where it says the following message:
"Your computer could not connect to another console session on the remote computer because you already have a console session in progress."
What I am trying to do is to access my Vista Ultimate computer using my Windows 7 Ultimate computer, and have been doing so this way for more than a year.All of a sudden I start getting the message that I have quoted. I do not know why it started doing that.As well, going in the Users tab of task manager you can see there that I am logged in as a console user.
After a factory reset and clean installation I am looking in to a few remaining errors that are reported.
One such is Quote: Session "Homegroup Log" failed to start with the following error: 0xC0000035 System - Provider [ Name] Microsoft-Windows-Kernel-EventTracing
Just read on Lifehacker MS internal blog report that Windows Live will be put to pasture. Anyone know if it's just the brand or the brand and ALL associated parts including great ones such as Live Mesh?
I'm just installed windows 7 on my 2009 imac through bootcamp. However there are some problems. Ive noticed when i try to play something on windows media player it will tell me that my computer is running low on memory and to close some windows. Also games run poorly if at all. I suspect its a driver issue but have gone through all the auto updates etc.
As I shutdown/restart my laptop, I notice it switches to a secondary desktop that has been running programs.A good example would be trying to open my Task Manager, I can Ctrl-Alt-Del and it will allow me to open Task Manager - however when I click on Task Manager, it opens on the Desktop running in the background. I can't even access the Desktop in the background, it only shows up as I'm shutting down - closing programs that I tried opening awhile ago.
I have an RDP Server on a windows 7 ultimate 32 bit and i would like to be able to use another system login screen to connect to this server. As in when i turn of display last local users, so that if i was to enter XXX into the username and XXX into the password and it will connect Although i wouldnt mind being able to set up roaming profiles between these systems either.