When ever i play Diablo or any other game it runs smoothly for about 30 minutes and the monitor shuts off and theres no sound but the computer is still on. I bought my computer a few months ago so i dont know what the problem is. Here are my specs.
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
When I open up in regular mode, as it is setting up I get hundreds of small lines across the monitor.They are thin lines like on notebook paper but very close together. Then within a few minn. the computer restarts. My operating system is windows vista.When I restart it in safe mode I don't get the lines and it works fine except for the programs that don't start up like sound and some of the programs I try to use. [code]
I am using Windows 7 RC on a Dell 1501 laptop. The problem I have is if I leave the computer idle for a few minutes and the screen turns off (the pc doesn't go into hibernate or sleep) and then I move the mouse, the screen turns back on but the pointed is jumpy and my programs are unresponsive.
If I hit ctrl+alt+del the system then needs to be shut down by holding the power button. I used the Beta previously and didn't have this problem. Anyone out there know anything about this problem? It makes the system almost unusable. Performance is very good with 7 except for this issue.
I've seen lots of problems but this one has me puzzled. I thought my old graphics card (EVGA GTX 285) was having some problems and it was time for an upgrade so I purchased a new EVGA GTX-660 ti. I'm still having the same problem so I don't think its the graphics card. What happens, when windows starts before the log in screen comes up the monitor shuts down. However, I can start Windows in safe mode. I can go in and remove the drivers and restart Windows and everything comes up. Windows will install the new drivers and when I restart to set the drivers the problem returns exactly as before. I have flashed the BIOS, updated the chip set drivers, tried loading the card drivers from several different sources and no luck. Its a Gateway FX6801 PC, i7, 12 gigs of RAM, 750w power supply (I have watched the BIOS power and its steady as a rock)
My 6970 xfx works great except when I connect the hdmi to my receiver. The monitor just shuts down. Is there a procedure I need to do to prevent it? When I disconnect the hdmi the monitor turns on...
i'm trying to run an older game called Daiblo 2 Lord of Destruction. The game seemed to install fine, but every time I try to play it it gives me a Critical Error 22 (Something involing the directdraw). I can't see what's wrong because I just formated and installed my windows 7 ultimate 64bit and updated it before even intstalling the game. Anyone want to shed some light on this matter?
I just got Diablo II and I just bought a new laptop and it is running Windows 7 64 bit and everything runs fine but the colors in the game are all messed up. Like rainbowy. I downloaded the latest patch as well.
I am trying to install Diablo 2 on my Windows 7 64bit system and I am getting an error at the end of the installation process that says: Setup was unable to create the following directory:C:Program Files (x86)Diablo IIsaveI have looked into this a lot and have been told to create the directory myself, How do I do this without it adding another Diablo II folder in the directory? Example: if i create C:Program Files (x86)Diablo IIsave, it will end up being: C:Program Files (x86)Diablo IIsaveDiablo II, Adding the Diablo II file folder at the end of the directory. It is still having the same error. Is this the correct way of installing?
I have had this problem ever since my dad built this computer and even he has no idea what has happened. I am not a computer genius but I came across the windows helps forum so now I am deciding to give it a try. This blue screen occurs most when I am playing games or when I am trying to rate my computer's assesment through the windows experience index sometimes it would say windows assesment tool has stopped responding in the middle of the test, but I think I have finally solved it through the clean boot method that windows has shown me. But the BSOD still happens and I do not know why.
I downloaded the Diablo 3 beta client from the official blizzard website yesterday and ever since I started installing it I was able to connect with my wireless but not access any sites whatsoever, (for some reason aim works). I have tried connecting on the same computer with a wired connection and that works and tried using my wireless on another computer and that works.When I try going to any sites in google chrome or try the windows troubleshooter they both give me a DNS error message.So far I have tried:
Game worked fine for the beta and even for a week or two after launch. Randomly (not on a patch day), the game started crashing. Now it crashes after 2 or 3 minutes in the game almost every time. I've followed all the regular troubleshooting steps (see Battle.net thread here). At first I didn't see any error logs, but the Action Center came up today with a bunch of errors looking like this. I included the recommended error files, the dump files from the error in the above screenshot, and the perfmon report.
randomly get the following exception while playing Diablo 31) KMODE_EXCEPTION_NOT_HANDLED2) IRQL_NOT_LESS_OR_EQUALIs Windows 7 . . .- Windows 7 64 ?- Windows 7- Full Retail- What is the age of system (hardware)?2~3 years- What is the age of OS installation (have you re-installed the OS?)
When I try to run D2 in fullscreen I get a UE. However, when I run in windowed mode it runs just fine. Not sure why this is, but it works for me.If you want to run D2 in windowed mode you have to right click your Diablo 2 shortcut, go to properties, and in the "Target:" field you should see something like "C:Program Files (x86)Diablo IIDiablo II.exe" Just add -w to the end of that (after the quotes and with a space between) so it looks like "C:Program Files (x86)Diablo IIDiablo II.exe" -w
I have the hard copy of Lord of Destruction but I decided it best to download it from blizzard.net (or battle.net, i'm not sure, it's irrelevant) because I thought it might run more smoothly on Windows 7 Home Premium 64. For whatever reason though, it won't run in full screen mode. The game has an inch or so of black bars on the left and right side of it. They appear from the intro (the Blizzard logo), to the main menu and into game play?
i recently installed diablo 3, and in the process of installing i somehow managed to pin a shortcut to my taskbar. this shortcut says "Battle.net Account Management". the shortcut works, and is actually a link to the battle.net login screen. HOWEVER... i cannot right click or drag on the icon to try and remove it. i can drag it along the taskbar, but thats all. its a small problem but for one as OCD as myself its extrememly unnerving. i found a related thread in support, but it was for the diablo 3 beta.
I've been getting a BSOD with the 0x000000124 STOP code while playing D3. It's not very frequent, maybe once or twice in a 4 hours span. It's happened after long periods of playing and after very short periods.
Windows 7 . . . - x64 - the original installed OS on the system? YES - OEM - What is the age of system (hardware)? ~1 year old - What is the age of OS installation ~1 year old
In the last few days I have started getting BSOD's When playing games, The two mentioned in the title specifically. They will run OK for around 5/10 mins then BSOD. The only change I have made to the system in this time that i can think of is updating my ATI driver, But I did that after this started happening.
My PC is Windows 7 OEM Home premium Intel Core i7 920 ATI 6970 6GB RAM.
Every 3 hours i get one big BSOD only when i play this game. I also play the game from a laptop and its working very well on it.Found earlier here on the forum Driver Update and FixCleaner and bought them. I thought it will find the problem...but it didnt?
Just got a question regarding D2 - LOD expansion. Here's what happened, I downloaded the game, installed the game. All good then I mounted the Expansion image via Daemon Tools, had no success. It's not accepting / won't run the image and gave me an error. I got freaked out. System froze and there's nothing that I can do aside from pressing the "reset" button. Is my OS compatible to the game? I got a broken file on my OS (OS issues) or the image itself is corrupted?
Currently I'm building a server for a client who wants to run several copies of Diablo 3 on multiple Virtual Machines.Further, they also need the ability to use a hardware unity function.
I purchased diablo 3 for my husband & my video card is not supported so he's unable to play, my computer is a HP P624 f-b desktop with a Intel GMA intregrated graphics, I am aware I need to up my power supply also, I have no idea what video card can be used to upgrade so the game is playable, not looking to spend a fortune?
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
I am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D Windows 7 home premium 64-bit AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
