I have a Toshiba Satellite A665 laptop, running Windows 7, 64 bit. Two weeks ago my Internet Explorer began running slowy, and then after a few days, the program would open but after about 30 seconds, would start clocking and give a Not Responding error message. It runs in Safe Mode just fine. I downloaded Firefox and experienced the same problem.
1) msconfig; Disabled add-ons - restart - problem remains
2) Malwarebytes - 0 problems were found
3) CCleaner - no help
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:57:19 PM, on 7/8/2011
Platform: Windows 7 (WinNT 6.00.3504)
I tried to install Internet Explorer 9 for testing a website. It prompted me to restart after the install, so I did. It never started back up. Now my computer will not boot into windows except in safe mode and system restore doesn't facilitate at all.
This is my ntbtlog.txt: [code]Microsoft (R) Windows (R) Version 6.1 (Build 7600) 5 29 2011 02:49:09.125 Loaded driver SystemRootsystem32 toskrnl.exe Loaded driver SystemRootsystem32hal.dll Loaded driver SystemRootsystem32kdcom.dll Loaded driver SystemRootsystem32mcupdate_AuthenticAMD.dll Loaded driver SystemRootsystem32PSHED.dll Loaded driver SystemRootsystem32CLFS.SYS [Log] .....
am using windows 7 but from today evening onwards, my computer has gone into a loop where it keeps restarting explorer time and again. And am not able to do anything.This problem is present even in safe mode.I tried fixing it by deselecting all the startup user application after using msconfig cmd.in safe mode.I saw a pattern in the startup bar that every time explorer restarts it tries to open network connections. hence i disabled all network services but again same story.
i tried to connect to the internet today and was told the ip config was wrong, i asked BT and they told me theres nothing wrong with my router or connection (as my laptop connects fine)i can however connect in safe mode?
I know this topic is similar to a number of others that have been posted before but i have not been able to successfully apply any of the solutions to the posts i have found addressing this issue.
It began happening after downloading an .mkv file. initially exp crashed and asked to restart. Did so and all good apart from occasional crashing and restarting.
Now turned lap-top on again and it won't even finish restarting before crashing, and this time there is no escaping the loop. Tried a restore from before the file was there but for some reason this didn't make any difference!
Currently in safe mode, have disabled all non ms services and all start-up items using msconfig and restarted normally - didn't change anything.
Ran CCleaner and cleaned out temp files and registry and still no change.
After found this site downloaded and ran SF diag tool as instructed in FAQ and copied all 8 files except Minidump folder which is apparently empty. Remaining files attached.
One person has suggested repairing using Windows Installer dvd this doesn't help me as OS was pre-installed and I don't have a DVD.
I have a Asus G73JH laptop and I've had it for a couple years now. Windows 7 64-bit Two nights ago I was able to get on the internet and shut down my computer and went to bed, the next day I was only able to connect to internet while in safe mode. This includes hardwiring into the router, and the modem while in normal mode. When connected to the router wirelessly it says I'm connected without internet, however I cannot even access the router through 192.168.1.1?
I bought new laptop ASUS K55V, and had an idea to plug in an internet, because my old laptop is really "old", and I found a problem - internet runs really slow in normal mode:
but fine in safe:
I think its a quite big difference I searched all over internet, tried multiple cmd commands, winsock fixes, and son on, Its a new laptop, all I have already installed are Firefox and Photoshop.
Specs:
Windows 7 Home Premium 8GB RAM intel core i5-3210M CPU 2.5Ghz 2.5Ghz
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.
window 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
i recently ran into a problem with starting up my computer. I have the blue screen of death. I've tried safe mode. It won't work. I would click safe mode it would load and then go back to the blue screen. I have a lenovo laptop and I'm not trying to pay 150-200 for it!
I own an HP G-62-347 Notebook, Windows 7 64 bit, Microsoft Security Essentials, Windows Firewall, no other real time AV, no other Firewalls, Windows Defender disabled as Microsoft instrucs for MSE, 3 GB Raam, 313 GB HDD, AMD Dual Core P-380 processor.My Laptop began freezing 8-10 minutes after bootup logon. No matter what I was doing, Media, Excell, Word, it would freeze up and hang. Sometimes CTL_ALT_DLT would unfreeze it, even before the task manager appeared, but it will take 3-4 minutes with an o[ague screen and the progress "circle" moving then unfreeze, sork 1-2 minutes, freeze, etc. Then all clicks on something to activate would result in loooong (long) delays, 15 to 45 seconds, then the new screen or window or peogram would open, sometimes frozen up.This did not happen in safe mode.I have (on suggestions) removed all things from my start up or programs that other's have suggested, Google Update files, and three or four others that others had issues with that I found on the net. I have also removed programs that I had installed around then.
I have also run, in Safe Mode, MSE, MS Safety Scanner, MS malicious file remover, ESET online Scanner, my laptop is clean.I have used mscong to disable all non-microsoft items to see if that helped. It did not. Same issues.I have used startup repair, and after scanning received a message that there was a problem, but that it could not fix it, did I want to send a report to Microsoft, I checked yes and it sent me to System Restore, ran it for about a week ago which was when I had downloaded some software, and the problem still existed, which sent me back to System Repair, ran it, same error message, reported again.I used a Repair Disk to get back on the laptop a coulple of times when needed, but ultimately, the problem surfaced still.I have used ReImage Plus to rebuild all my defective Windows Files and a lot of my 3rd party defective files. And, I also did a Win 7 repair install.I am pretty convinced something is being loaded somewhere, but can't find where or who or what.Am I on the right track? Have I missed something? Am I wrong? I do not really want to do a clean re-install of Windows 7, for if I do I am reformatting everything to clean any and everything.... sort of NUKE it... but would rather find the culprit (for education purposes). And, I dislike installing and updating and setting up everything again more than I hate "boiled okra!"Anyone and Everyone that has had to do with this or similar sounding issue, please reply. I have two weeks invested, and would like to "graduate" resolving this and getting the learning experience of WHY?
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
My laptop hangs up/ freeze in normal mode. Now I can only open it on safe mode. I was only copy pasting some files couple days ago when it happened. I have to hold the power button to turn it off. I already tried system restore and reformatted it twice. I'm using HP Pavilion dm4-1160us, windows 7 64-bit.
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
Windows 7 x64 does not boot into Safe Mode or Safe Mode with command prompt. Normal mode boots perfectly. Are there any suggestions on how to resolve this? I've tried startup repair and attempted fix boot, etc. No affect. The unit is free of infection. I also tried using SFC, but it said everything was fine.
So I am having trouble with my computer since last night it started to give me the blue screen of death every 10-15 minutes with all kinds of different reasons. I cleaned my pc, searched for viruses as much as I could, and I have restored to a different point in time twice. I have tried the windows memory diagnostic twice. No issues. I have tried the files check before start up, no issues were detected.Pfn_list_curruptan attempt was made to write read only memorysomething on the lines of service_system_exeption? Not sure about the last word to be honest I caught it while my computer restarted on its own. Memory_ managment Bad_pool_errorI am not sure what to do I have done all I can by myself. I will be doing a complete restore to manufacture settings after I get something to back up my files. In the meantime maybe I can figure out if it is a hardware issue or if there is something else currupt.
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
I have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
I have Windows 7 on Laptop. My mouse stopped responding in the Windows normal mode but functions fine in the Safe mode. I restarted the laptop several times but the problem remains.
i bought my hp pavilion dv6 laptop in 2010 and the warranty went out on 2011, i turn on my laptop and i only get the quick web. Every time i try to start window it tells me it cant. i can not even get on safe mode. it asks me to repair my computer but every time i click on that i get a blank blue screen (baby blue color). i have tried to go on safe mode it wont let me, i tried to go on safe mode command prompt and it still wont let me,
I have a HP Probook 4430s and under device configurations in the F12 options, what does "Numblock on at boot" mean and what does it do. I'm still having troubles booting up.I can start up in safe mode and w/networking and have been trying to figure out how why it dosn't want to work right. When I'm in safe mode everything works fine but when i shut down and try to power back up i can only do it in one of the safe modes, also it takes a really long time to even do that.So I was just wondering what Numblock on at boot ment and what it does.
I have installed the RC build of Windows 7 as a second OS on the machine.I am finding it incredibly difficult to solve the display driver issue that I have. Currently in Device Manager my display adapter is listed as:Standard VGA Graphics AdapterI believe that, since this is occuring, any ATI graphics drivers that I try to install aren't recognising the x700 as my graphics card and so are failing to update any drivers.At the moment I'm stuck with the standard Windows display drivers which limit the resolution of the screen and disable graphics acceleration etc..If anyone has an idea of how to soI wondered whether it would have anything to do with updating chipset drivers etc...but since I've never had to do that before (and since I am still using XP on the laptop) I didn't want to start messing things up.
edit: I should add that, on my first install of Windows 7 I used Windows Update to install an 'ATI Technologies Inc. driver update for ATI MOBILITY RADEON X700' - once installed, after rebooting the screen was completely black and there was nothing I could do to get the picture back. I tried booting in low-resolution mode and safe mode but neither helped. I wondered whether it was because I had the screen set to the highest resolution possible before installing and rebooting the drivers.
I am using windows 7 32 bit on my computer. while booting my computer initial windows 7 logo appears with keyboard num lock lit; but after the logo stuff; the user choice screen should have appeared but; the num lock key goes off and doesn't re light and black screen appears. But it works fine with safe mode and safe mode with networking?? What could be the problem??
