I am trying to install Win XP over Win 7 (64bit) on my Lenovo Z560. Most (if not all) laptops does not have Floppy Drive any more and the tutorial suggests that I have to use a floppy disk to install Win XP SATA Driver/s just before I start to install Win XP to my laptop. How important to do this step? Can it be done later? The only way seems to be is using an external USB Floppy Drive? Then again, if I cannot use a USB Flash drive to load the driver/s, will the external USB floppy drive work at this stage of Win XP installation?
I don't have a one key rescue button but have one key rescue desktop shortcut. When I launch it the laptop restart but gives error 'disk read error, press cntrl+alt+del to restart'. Also while using laptop my laptop gives a beep sound. And it hangs and the hard disc rotation light stops. I want to restore my laptop but I can't.
I had problem starting my Lenovo ideapad z560. After many tries it started so I immediately launched one key app. laptop rebooted but showed a error saying 'Disc Read Error. Press ctrl+alt+del to restart'. Now I am using laptop in safe mode. One key app restores my laptop to earlier time. I don't have a windows cd. The OS is hidden in hard disc. Also my windows restore is not working and I don't want to lose my genuine windows.
im currently using windows xp and i want to change to windows 7.im curious whether windows 7 can install all the T60 drivers without missing any.(chipset,LAN,ATI radeon x1300,wireless,USB,audio and bluetooth).if there are still missing driver, where can i get it?
I made fresh installation on my new Lenovo E520, but it freezes 3x per day. Mouse is moving, but nothing more, task manager can�t be started. It happens with various applications. But normally, no BSOD is displayed.I looked at topics:
-"Using Driver Verifier to identify issues with Drivers", -"Driver Verifier - Enable and Disable" -"Windows 7 - Blue Screen of Death (BSOD) Posting Instructions"
I turned on verifier and before system launched, BSOD appeared. I run BSOD Dump & System File Collection app and I exported report in perfmon - both attached.I have Windows 7 professional, 64bit, full retail.Laptop and system installation are new.
I installed my OS 7 ultimate few times and still can't install the camera device on lenovo ideapad z560 laptop even when I download the device from the official lenovo site. Itts says device not matched and when I open youcam it says there is no camera installed.
When trying to install W7 in 64-bit form I get the error message "The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."
this is new purchased notebook and i can't install the windows 7 anywehere in the driver
So yesterday I bought these quadrophonic speakers from a friend. The problem is, that only front right is working (everywhere- in test, windows sound, music, games etc.)... I thought that the other speakers might be bad, switched them but no- now when the FR speaker is the different one, it is still working and the others are not... I plugged the green wire in the green socket, the black one (rear) in the black socket, confirmed it in the realtek manager (front speakers, rear speakers)... I tried setting it to other mods (5.1, 7.1), it�s the same, only front right speaker is working... I downloaded the newest driver (2.52 or whats the newest one) both from gigabyte and realtek...When I plug the green wire in my notebook headphones socket, both speakers work ok (I have Windows 7 ultimate on my notebook to, but the sound card is not realtek hd)...
I'm planning to install windows 7 64 bit on my computer, so i did some research. By downloading the win 7 upgrade advisor they said my computer is ready for upgrade but my biggest concern is that my VGA(winfast gtx 280) doesn't seem to have windows 7 driver and i lost the cd also(but it's downloadable). The easy transfer from microsoft is also my concern because my computer is infected with a bunch of viruses, and i definitely don't want to bring them with me.
My full specs:
-Intel core 2 quad Q9550 -Mobo(forgot what it was) -V-gen DDR2 2GbX2 -VGA: Winfast gtx 280
I was looking to upgrade to 64-bit Windows so I could purchase more RAM, I was told that the Windows installation disc comes with 32-bit and 64-bit, but my disc says ' Windows 7 Professional 32-bit x86 Upgrade' If it does come with the 64-bit, how do I install it?
Can I download a 64-bit ISO and use my product key to activate it?
I'm trying to do a clean install of windows 7 and it installs all the way up to 90% and then just stops. its a copied CD the windows 32bit version installs fine but the 64 bit just wont go any further.
I read 32-bit versions of Windows do not have the capability of setting up a 64-bit install of Windows on a USB drive. If this is true, is there still a way to accomplish this with no optical drive in the new system? I'm trying to install Windows 7 64-bit on a fresh build, and the computer I'm working with right now is 32-bit Vista.
I've been trying install Windows 7 Ultimate 64bit on my Compaq Presario F700. It came with Windows Vista (Don't know which version). It then became corrupted, so I installed Ubuntu 10.10 on it, then I DBANed it, Now it won't install Windows 7. It says that Bootmgr.exe is missing. I tried a repair disk, I tried the bootrec (don't know if i'm doing it right).
When I try to install win 7 64bit it won't complete the install. The screen is blank and it will stay that way for over an hour. I have read many post on this site about that problem and have tried many of the answers that were given (only having one drive connected, using only one stick of ram etc). but it still will not install all the way to where you name the computer and put in a password. When I reconnect the other drives and boot into my win 7 32bit os and go to computer and check the drive that I was trying to install the 64 bit os the files are there. Of course under users there is only Administrator, default and public. I have tried 3 different install disk that I borrowed from other people and the same thing happens.
Does Win 7 automatically detect where software should be installed? I see it choosing x86 a lot, should I allow it or try and put in the 64 bit program files folder?
Recently I have been trying to upgrade one of our computers (Dell Dimension 9150/XPS 400) to Windows 7. While this Dell model is old, a brief search on the internet shows that several people have gotten Windows 7 to work on this model just fine, so I'm inclined to believe this should be doable. I have performed multiple clean installs of Windows 7 Professional (64-bit) on this desktop, but inevitably I will eventually start getting a BSOD. When the computer restarts, I get the notification "Windows has recovered from an unexpected shutdown" with the following details:
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional information about the problem: BCCode: 24 BCP1: 00000000001904FB BCP2: FFFFF88002AFF318 BCP3: FFFFF88002AFEB70 BCP4: FFFFF800028EC185 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that describe the problem: C:WindowsMinidump-52112-24616-01.dmp C:UsersCherylAppDataLocalTempWER-40014-0.sysdata.xml Read our privacy statement online: Windows 7 Privacy Statement - Microsoft Windows If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt Here are download links to the files that "describe the problem": Minidump file & Sysdata file.
The BSOD is kind of a crap shoot; on some installs of Windows 7 it happens occasionally while on others it happens as soon as the desktop loads. The problem gets worse (or more likely to occur) the farther I progress in "setting up" the computer. Here is a general procedure I have been following:
1) Clean install of Windows 7 Professional (64 bit) on hardrive 2) Install all the Windows 7 Updates (the only drivers installed are those recommended via Windows Update as Dell offers none for this computer on Windows 7) 3) Install Microsoft Security Essentials 4) Install Microsoft Office Professional 2010 5) Install Microsoft Updates for Microsoft Office 6) Install other programs I need
One time I got all the way to step 6 and was ready to transfer backed up files to the desktop when I started getting a continual looping of the BSOD...with the most recent install, I only got to step 3 before the first BSOD occurred. I have tried running CHKDSK but that does not find anything nor seem to prevent any problems. I ran a memory test via advanced setup (where you press F8 while the OS boots) and that said something like "Problems were detected...you will need to contact your hardware provider" or something to that effect.
However, no specific information was revealed; perhaps a summary is supposed to come up once you reach your desktop but this was during an install where the BSOD was continually looping so I never could see the desktop for more than a few seconds. Reinstalling the original Windows XP OS doesn't seem to fix the problem; regardless of OS, drivers, or other programs installed, the BSOD inevitably shows up and does not seem tied to a specific update, program, or action.
I have never installed a new os from start. Do i need to download drivers for my mobo ready for a fresh windows7 install?Or does it find them automatically on the windows disc? Or online later? I have drivers on disc for all other hardware, but not mobo.
I am trying to install a 64bit Windows 7 on my 32bit Vista computer.. I have run the upgrade advisor thing and it said that it should all work... I bought a Family Pack with 3 upgrades and it has both a disc marked "32-bit software" and one marked "64-bit software". I want to get the 64bit windows 7 home premium so I inserted the disk and tried to run the Setup.exe but I get an error saying "The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
I then tried to run the file as administrator and then get a different error saying E:setup.exe is not a valid Win32 application.
I have already installed 1 of my licences on another computer but then I installed a 32-bit Windows 7... I know I have to do a clean install to go from 32bit to 64bit but shouldn't the disc work on my 32bit system? :S
Won't boot off external hard drive[windows7pro64bitInstallation](320GB)'ve been making custom images of Windows 7 for my work. Currently I am working on an image filled with loads of programs (the wim file is 27gb). I have followed the normal instructions to create a bootable usb drive.captured the wim using imagex, used bootsect /nt60 on the external drive etcI am just wondering, is the reason it won't boot, is because it's not a flash drive?Previously all my other windows 7 builds have been on 8gb flash sticks.Is it possible to make a working bootable installation drive on a 320 external hard drive?and if there is a way.
I am trying to install window 7 from a usb. It get to the loading windows files screen but right after that i get the 0xc0000001 error. Failed to load winload.exe.
Motherboard - ASUS A8AE-LE Hard Drive - Wester Digital IDE DDR PC3200 AMD Athlon 64 (939 chip)
I've tried 3 different Flash Drives, 5 different Hard Drive. Cant load from CD/DVD drive because when I boot the system with the CD/DVD drive installed i get the Blue screen of death.
I'll be installing both Firefox and Chrome in Windows 7 64bit (I use both). Do I have to install BOTH 32 and 64bit versions of Java and Flash to support FF (32 bit browser) and Chrome (64bit), or will installing the 64 bit versions suffice?
I just purchased a new Dell Inspiron with Windows 7 64 bit. I'm not a programmer and have tried desperatly to install my Adobe Web Premium software I had on my old laptop running Windows XP onto my new laptop. I tried several of the suggestions I've read on several forums but the program stalls at 90% while checking system profile.... at the very begining of the load.
I am using Windows 7 ultimate 32 bit. I am planning on installing the 64 bit version soon. Before I do I wanted to know if it could be installed on just one partition. My 500 GB hard disk has about 7 partitions ( C : , D: , E : etc). If I want to install windows 7 64 bit on the primary C: Drive (Clean install) would it affect the other partitions, which has data on them? (D: , E: etc?) like erase or not make them function. Also will my external hard disks which worked on 32 bit system (seagate goFlex Desk) work on the 64 bit after i plug it in after the install? All of my externals have my backups and I wouldn't want them erased.
I have Win 7 that apparently only has a 32 bit system. I need to install a 64 bit program but get the message that the laptop won't support a 64 bit program.
Tried to install Service Pack 1 on my machine today and I find it gets stuck as it installs once I've shut it down. I did have to hide one of the updates about a month ago which did the same thing, so I'm assuming it's been put in SP1 and is what's causing it to get stuck. Just tried to view the hidden updates to tell you which one it was, and to ask how to stop it from installing in SP1, but it seems to have disappeared from there, which might be because of SP.Can I find this missing hidden update? Is there a way that I can remove this one update from SP1?
I recently downloaded the AMD all in one driver from this link: [URL]. I have a few issues however:
1) I don't know if this is necessary, but I can't find out my current driver version. I did a google search on how to find it, but the results I received told me to look for a "Motherboard Resources" entry under "System Devices" - problem is that no such entry exists on my system. 2) Whenever I click on the setup file for the driver I downloaded, it launches it using the ATI Catalyst Control Center. Is this right?
These are my system specs: PSU: Arctic Cooling 550 MOBO: Asus M5A78L VGA: Club 3D Radeon HD 6870 Fans: 2 x 120mm CPU: Amd Phenom II X4 955BE + stock heatsink Wifi: TP-LINK TL-WN781ND RAM: 2x2gb DDR3 Corsair Value (DDR1333) HDD: Samsung Spinpoint F3 1TB Optical drive: Samsung SH-S222AB 22x DVD/CD SATA
Randomly (for example: while surfing the internet), on Windows 7, the computer crashes with a screen with blue and grey vertical stripes (or sometimes totally grey or black). Sometimes this screen "hides" a BSoD, sometimes it doesn't. The system crashes only if video drivers are installed. On Ubuntu 11.04 (64-bit) and Windows XP (32bit), even after installing the drivers, there are no crashes. From BlueScreenView, all crashes look identical.
I tried: - 2 passes of Memtest86+: 0 issues - Installing Windows 7 and then ONLY the video drivers: CRASH - Installing XP 32-bit SP2 and the drivers: does not crash - Using Ubuntu 11.04 64-bit: does not crash - Uninstalling the drivers: does not crash - Safe mode: does not crash (obviously)
symptoms: random fps loss here and there during video playback in Internet, as well as flash based games (about 1 or 2 seconds and then goes back to being smooth in what seems to be 20 or 30 second intervals). i'm not sure if this is 100% accurate, but i noticed that fps (frames per second) took a hit after installing sp1 (service pack 1) on windows 7 ultmate 64 bit. i don't know the cause, and i've tried uninstalling and re installing it but no difference. hardware is not an issue, as i just built a new computer with some of the latest hardware.
system specs are as follows: os: windows 7 ultimate audio driver: realtek version: 6.0.1.6482 (latest) audio codec: alc892 16 gigs of ddr3 1600 corsair vengeance ram saphire radeon 6850 hd western digital caviar black 7200 rpm 1tb 700 watt psu fx 8150 am3+ 8 cores asrock 990fx extreme4 am3+ amd 990fx sata 6gb/s usb 3.0 atx amd motherboard
i don't have this issue when i was in windows xp 32/64 bit, and again, symptoms only seemed to start after installing sp1 for windows 7 ultimate 64 bit. broswers tried: ie9, chrome, firefox, safari (safari seems to handle it slightly better, but symptom still present non the less).
