I've purchased a Windows 7 Pro Upgrade 64 bit couple of months back, and I'm about ready to install it. However, I can't seem to be able to install XP on my new PC, and I only have a copy of Vista 32bit.
I do not have a second PC to test it on. Would I be able to use a copy of Win7 64bit Upgrade on top of a Vista 32bit?
I'm installing Windows 7 upgrade for vista and it finds Kaspersky anti virus on my computer and tells me to uninstall. I have no knowledge of this programme and can't find it anywhere on my computer so I can't uninstall.
View 3 Replies View RelatedI purchased a SSD for my laptop and installed it. Therefore the SSD is blank with no OS on it. So I need to install 7 but it's an upgrade.
1.) Partition my 120GB SSD as partition#1 40GB, partition#2 40GB, leave rest unpartitioned
2.) Install XP on partition #2
3.) Install 7 upgrade on partition#1 which will see XP on partition #2
4.) Once install is over delete partition#2 and recreate partition#2 as 80GB
Is it possible to install a fresh copy of Windows 7 Upgrade (Genuine Retail Copy) onto a completely new hardrive without having any previous Operating Systems?
View 6 Replies View RelatedI have an old XP system that has died and i am building a new system to replace it. I'd like to use Win 7 on the new system meaning that the current XP software will be retired. I am purchasing new SATA HDDs and will not be using the ATA133 that has the XP installed.
If I understand correctly I can use an upgrade version of the Win 7 to perform a clean install on my new system. Correct? Any tutorials available on the process?
Just to be sure I am understanding the sticky above correctly, I wanted to ask a question. My current PC has an OEM copy of windows XP. So I can go ahead and buy an upgrade version of Windows 7 for 119 instead of 200 for the full retail version and install it on my computer right? Then, when I buy a new motherboard soon, I can upgrade my computer and use the same windows upgrade version CD's to reinstall Windows on the upgraded computer right?
View 6 Replies View RelatedI have FP up and running on a desktop with a Vista OS and Office 2003 but I want the mobility that my laptop offers. When I originally tried to install this same software on my WIN 7 Home Premium laptop it was unable to find a qualifying program. It wasn't seeing the Office 2003 - even with the actual install disk in the CD drive.So, I purchased the upgrade to WIN 7 Ultimate and have installed the Virtual PC with XP Mode thinking I could circumvent the WIN 7 and get FP installed through the virtual OS. I have access to both Office XP for Students and an Enterprise Version of Office Professional 2003.
View 9 Replies View RelatedI am doing a clean install using the upgrade DVD but on a virtual machine (on a Mac using VMWare Mac Fusion). Everything goes smooth and as per the tutorial except that once I arrive to the "Windows product key", it does not recognize the product key. I skipped that step and completed all other steps as indicated. However, I was unable to activate my windows 7 (last step) as it mentioned that the product is only for upgrade from older version and not for a clean install.
I do have windows XP copy but I would rather do a clean install.
I've a customer who simply cannot install all updates. In in the end, he decided to try the upgrade route in an attempt to fix the updates not installing. He got hold of an ISO (without SP1) and started the process. At about 70% completion (I believe the OS components have successfully been installed) it stops. The error message states something about lack of disk space to install the applications (????).There's plenty of disk space of coursePrevious to the upgrade try, we've run various MS FixIt tools, SFC, disk check, disabling A/V, checking for malware, etc. Commonly, upon unsuccessful updates, the error codes are either 8007371b or 80073712.
View 9 Replies View RelatedI searched for a solution to my issue and could not quite find anything exactly like it. Here is what I have and what I am looking to do:
I currently have a HDD in an HP system, with OEM Vista loaded on it. I just purchased a retail copy of Windows 7 Home premium upgrade and a SSD. I plan to use the SSD for boot, windows, and World of Warcraft.
What I want: To do a clean install of Windows 7 on the SSD. I plan to wipeout the HDD afterward and use it as a storage drive, as I have no use for Vista.
Question: What is the easiest way to do this? I was planning to just hook it all up, pop the Windows 7 disk in, start it up, and do a custom install to the SSD. Load up windows, activate the thing, then wipe the HDD. However, someone said that might not work and I might have to call Microsoft with my Vista key.
I'm running 32-bit build 7231 and want to upgrade to 7260. Yeah, I know that a clean install is preferred, but I want to test out the upgrade instead.
When I go to install it from the existing build, it complains about the version. So, I went into the cversion.ini file and change MinClient to 7000, thinking that would fix it. But it still complains.
So, is there more to it than that? OR is it that this build simply can't be installed as an upgrade?
I currently have Win 7 Home 32 bit installed. I will be upgrading my system and using a new Sata hard drive.I would like to install my Win 7 retail upgrade disk [ the 64 bit version ] on the new drive.Can I do this? If so what would be the easiest way to retain all information from my current 32 bit drive?
View 9 Replies View RelatedMy computer went through some problems and I will be getting a new hard drive. Once I get the new HDD I will have to reinstall Vista, which will only have up to service pack 1 included. Do I need to then upgrade to Vista Service Pack 2 before installing my Windows 7 Professional Upgrade, or will it still work on top of service pack 1?
View 1 Replies View RelatedI have a bit of a strange question about installing the Windows 7 upgrade. I'll try to keep it as simple as I can. Firstly
1: I currently have Windows XP SP3 Home Edition installed (and activated) on my 160GB WD Caviar Blue hard drive, which has 8MB cache. It's getting a bit full now.
2. This hard drive is one of the few remnants of a Dell machine I bought a few years ago.
Surprisingly, the restore disk still works and activates, even though I've changed the motherboard and a number of other things over the years. My last reinstall was about a year ago, and I had no problems reactivating whatsoever - I didn't even need to phone Microsoft.
However I doubt it'll install and activate on a new hard drive - particularly as I've also changed the DVD drive since my last activation (as the old one broke), literally the only things remaining from the old system would be the RAM and the processor.
2: I have purchased a 500GB WD Caviar Blue with 16MB Cache
3: I intend to buy Windows 7 Pro Upgrade from TheUltimateSteal for £30. I'm a student, but will be graduating soon, so it seems sensible to take advantage of this offer while I can.
4. Clearly I can install Windows 7 in the normal way onto my current drive and use the 500GB drive for backing up my files, which I'll do if that's the only option.
5. However, if I did that I would not be taking full advantage of the extra cache of the new drive. It would be nice if I could use that for my primary installation to speed things up a bit.
So here's my question:
If I start the upgrade process having booted from the 160GB drive, but during installation select my 500GB drive as the target for the installation, will Windows 7 install and activate correctly? Will it recognise the pre-existing installation, even though it was on a different drive?
If not, then:
If I install my Dell restore disk on the new drive, and don't activate Windows (which presumably I won't be able to), and then run the Windows 7 upgrade on THAT drive, will Windows 7 install and activate correctly?
Basically, is there a legitimate way of installing a Windows 7 Upgrade onto the 500GB drive, on the basis of there currently being a valid XP installation on the 160GB drive?
I have no intention of continuing to use XP after the upgrade, if I am able to install and activate Windows 7 to the new drive, then this will serve only as a backup for my files.
Has anybody tried something similar and succeeded/failed?
I've already read the tutorials on here about doing a clean install of Windows 7. I'd like to avoid dodgy workarounds, as I'd rather not run into problems further down the line when it comes to updates and that sort of thing.
I'm trying to play a blueray disc on my Sony Vaio VPCF22M0E/B Windows 7 laptop. First of all, when I try to open Corel WinDVD currently version 10.0.5.800 I receive the message from LogicLayer� with WinDVD information service is not yet ready. Please try again lateSo I went on the Sony website to download the latest drivers, WinDVD BD - 10.0.6.162 here-ony : VPCF22M0E/B updates | Download updates for VPCF22M0E/BThen when I try to install the upgrade I get the following message from 'Update Module' - InstallShield Wizard-This upgrade patch can't apply to your version of WinDVD. Setup will now abort
View 1 Replies View RelatedHow do I installing something during the Windows Setup Menu's Installing features and Installing updates?
View 3 Replies View RelatedI ordered the 50$ Windows 7 upgrade disk. I realize that Windows 7 will need vista or XP already installed for the upgrade version of Windows 7. But if I want to upgrade my Vista 32-bit to Windows 7 64-bit, Will I be able to do it with this upgrade disk? after all I will need a fresh install (because 32 to 64) and this is the upgrade version...
View 9 Replies View RelatedI have a pc with Windows XP pro 32bit retail version. First I have made an image, just in case. Then I have upgraded it to windows 8, 64bit by using the retail upgrade DVD and clean install. However, I found out that my motherboard is so old (5 years old) that there are no drivers for win8 and after asking ASUS they said that the motherboard is not supported any more and that there will be no new drivers for it. I tried using win7 drivers but it did not work and without correct drivers a lot of things does not work (in particularly hdmi port).What I want to do now is to revert to my image (windows xp), buy a Windows 7, 64bit upgrade retail DVD and upgrade windows xp to windows 7 for which there are drivers for my motherboard.
1) Can I use windows xp retail (whose product key has already been used to upgrade to win8) image to upgrade to windows 7 retail? will the activation of windows 7 succeed? I want to use clean install again since i upgrade from 32bit to 64bit
2) If the answer to question 1 is a yes, how does microsoft prevent users from using the same windows image file to upgrade different pc's? I mean, theoretically, I can make an image of pc1, copy it to a hard drive of pc2 (even if it will result in erroneous installation due to different specs) and upgrade both systems by using two VUP product keys which are cheaper than one VUP + one retail product keys
3) Can I use windows 8 upgrade DVD which is not used any more to upgrade another PC?
I have tried installing on 1 stick of ram, the old HDD is unplugged, have deleted the partitions, running bios in AHCI mode using 6gb/sec cable, when I look in the drive some windows files have been copied onto the SSD and it is accessable. It is a Corsair Force series 3 120Gb.
View 4 Replies View Relatedcan i use the windows 7 professional student upgrade to upgrade from windows 7 home premium?
View 4 Replies View RelatedI purchased Windows 7 Professional through the Ultimate Steal.
Downloaded it, put it on a disk also.
It will go through the start of the setup and copy files etc, and then it will give an error and say to install from a current version of windows I need to use the upgrade anytim through windows.
But when I go to upgrade anytime it asks for an upgrade key, but all I have with the purchase was a product key and it says that I can't use the product key.
any help?
edit: also i have windows 7 home premium installed right now
and here is exactly what it says:
"To upgrade from one edition of Windows 7 to another edition of Windows 7, use Windows Anytime Upgrade. Cancel the upgrade, open the Start menu, and search for Windows Anytime Upgrade. "
I installed Win 7 RC on a new build and purchased Vista Home Premium 64bit OEM with upgrade to Win 7 Home premium. The Win 7 upgrade disc has arrived. I understand that Vista must be installed and activated for the upgrade to work. Attempts to install Vista with Win 7 RC running or booting from the Vista disc lead to error code 0x80070103, insufficient free space. My HDD has > 450 Gb free space in 2 partitions. Do I need to reformat the HDD in order to install Vista over Win 7?
View 9 Replies View RelatedCustomer dropped off a laptop telling me that his Windows upgrade had failed.
It's a new HP DV6 that had Vista pre-installed on it.
I've taken a look at it, and there's a "Windows.old" folder on the root of C:, which is of course a back up of all his data.
There's also a batch file inside the folder with the following inside of it:
"REM Dummy file for NTVDM"
I'm wondering if there's a way to "continue" the upgrade / merging process? He has asked me to re-install all of his software the way he had it. So i'm hoping there's an easier way to continue where he left off.
I know Windows 7 creates a "Windows.old" folder when upgrading from XP. Not sure why one was created for a Vista to Windows 7 upgrade though.
I'm considering whether to upgrade from Windows XP to Windows 7. IMHO, the new OS seems to be not sufficiently "mature" yet, and it is better to wait for the first service pack to come out before actually upgrading.
View 9 Replies View RelatedIf I bought Windows 7 Upgrade for 49.99... could I use it to upgrade windows 7 RC instead of vista or XP assuming it even supports XP.
View 5 Replies View RelatedI have Windows 7 Home Premium installed on my my machine, but is is not activated yet. I will be getting a Windows 7 Professional key from the student offer, and I would like to use that. Is it possible to use that key in Anytime upgrade?
View 7 Replies View RelatedBought a new computer 8GB DDR3, 500GB HD, Core i5.Installed XP Pro on active partition 1 (100GB)Restored XP and files/programs from the Windows backup utility. All good, everything works. Insert Win7 Pro upgrade disk (legally purchased from Microsoft)Starts install 'copying temporary files'Error message 'Windows Setup cannot find a location to store temporary installation files. To install Windows, make sure that a partition on your boot disk has at least 686 megabytes of free space - error code 0x80070490 )Boot disk C has over 60GB free space.If I try to boot from the Win7 CD to do a clean install I get an error message that it is an upgrade version and must be started from within Windows.Have reformatted hard drive and gone through it all again but same result.
View 5 Replies View RelatedHave very recently purchased a Windows 7 Laptop and only now i have learnt that i might be able to obtain an upgrade to Windows 8.
View 2 Replies View RelatedI upgraded my Acer 5100 x86 from Vista to Win 7. I do have Vista recovery discs, however I was checking to see if I could recover the laptop to Windows 7 by using Alt/F10. Actually I was just trying to see if Alt/F10 worked at all and what I found after the Windows 7 upgrade was that I got a screen with the following:
Edit boot options for: Win 7
PathWidowsSystem 32Winload.exe
Partition 2
Hard disk 2522d7dc
/No execute=optin/PAE/Numproc=2
Enter=submit Esc=Cancel That is at the very bottom. What does all this mean and what does it mean as far as Alt/F10 goes? Does it mean that there is no way that works anymore because of the upgrade? I still have eRecovery and my Recovery partition is still "Healthy". I don't get why the Alt?F10 quit working though.
my operating systemis windows 7 ultimate x32 bit.Recently i decided to upgrade to windows 7 ultimate x64
i purchased a license key and downloaded from the official site this version of windows-i decided to install it using a bootable usb flash drive. i've followed all the steps to make the flash drive bootable and copied the files into it,however i can't install it.
after booting from the usb drive, it gives me a message"loading windows files" and after that is done,appears the normal "starting windows" image for a couple of seconds but after that the screen goes black with a moving cersor for a while and after that it freezes on something like windows 7 main screen-i can move the mouse but nothing happens
My motherboard is :GA-880GM0UD2H
CPU:AMD Athlon 2 x3 (3.2 ghz)
ram: 2 gb ddr3
usb device:jetflash trancend 8 gb
needless to say i have tested whether i can upgrade to windows 7 x64
i have also taken a video of the whole process but i can't attach it"error you aren't permitted to upload this kind of file"--the video is in vlc form
I am currently running on a Windows 7 Home Basic 32 bit 1Gig memory. I just upgraded my memory to 2 gig. I want to know if I can upgrade my system to 64bit now that I have a 2Gig memory.
View 2 Replies View Related