Hanging On Windows 7 Updates?
Dec 18, 2012I am just curious.Everytime I open Windows Updates window it hangs for 5 secs and then get back after that .I tried system restore but didn't worked.
View 4 RepliesI am just curious.Everytime I open Windows Updates window it hangs for 5 secs and then get back after that .I tried system restore but didn't worked.
View 4 RepliesFor the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.
I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM. Windows wants to install the same four kb files again.How do I stop this?
Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)
Installation date: 6/15/2012 7:47 PM
Installation status: Successful
[Code].....
I have 5 updates that fail to install. I have also tried to manually install them, but they still fail Here are the updates:
KB2586448
KB2572076
KB2564958
KB2567053
KB2579686
The error code I get is "800736B3". I ran MS FIXIT and it said they did not detect any problems.
Windows Updates continues to re-install five specific updates which are:*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2604121) -Download size: 38.5 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368) -Download size: 1.8 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656405) -Download size: 11.7 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2686827) -Download size: 4.3 MB.*Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2600217) -Download size: 32.2 MB.- I purchased my computer 4 to 5 months ago. It is a Windows 7 Home Premium Hewlett-packard HP Pavilion dv6 Notebook PC (64-bit Operating System).
View 3 Replies View RelatedFor a while now I have been experiencing a strange problem. My laptop keeps changing the Windows Updates without my consent. I know this has been raised in the past but my problem is slightly different.I prefer to choose "Check for updates but let me choose whether to download or install them", however periodically the settings change without my consent to "Never check for updates".This is very frustrating as I am constantly having to keep an eye on this, and change the settings back to what they were in order to receive critical updates, or indeed any other update.The laptop was bought new just under 12 months ago and came with Windows 7 Home Premium 64Bit pre-installed.Has anyone else experienced this, or can anyone advise on a fix?
View 9 Replies View RelatedMy wifes computer has been acting up for about a week now. IE 8 is not loading properly and is crashing. I am unable to connect to MSE to get updates or to Windows to get updates. I have run Malwarebytes and Emsisoft and neither one can find a bug. Chrome works for a while and the she gets the AW SNAP message.
View 26 Replies View RelatedI'm having a problem with installing windows 7. I start the computer and boot from my dvd-rom and it gets past the "Windows is loading files..." screen occasionally i get to the "starting windows" screen with no logo over it. other times i get a random blue screen. I've read a bunch of different forums online and none of the remedies seem to be working for me. I've tried disabling usb ports, unplugging all peripherals not necessary for the install, swapping harddrives, swapping video cards (including using the integrated),swapped psu, and messing with other bios settings.
My build is:
i5 661 3.33GHz cpu
Biostar TH55 HD motherboard
2x2GB 1333MHz Corsair Memory
600w thermaltake PSU
1TB Western Digital Caviar
500GB Western Digital Caviar
After a recent power failure at my home, I tried to turn back on my computer and I get hanged at the windows 7 logo. I tried to restart multiple times but it don't work. So I to to do safe mode but it don't work either. It gets stuck when it loading to drivers. So I tried to put in the windows 7 installation disk to try and reformat my hard drive, but even that gets hanged at the logo screen when it tries to boot up.
View 4 Replies View RelatedMy window 7 Ultimate OS is hanging after logining into to. After desktop and Task Bar appears nothing more works. Even Ctrl+alt+del also not appears. After a long break it says "Failure to Display security and shutdown options". i have gone through all the options from F8 repair options since 3 days. Opened in safemode and checked the event viewer. i found many errors in it but don't know which is causing this problem. after checking all i found this may be responsible and searched it on google and taken what ever measures they said and got an advance from login screen to desktop and taskbar appearance and hanging there (present situation). Error: Session "ReadyBoot" stopped due to the following error: 0xC0000188, event ID:3, Source: Kernel-Event Tracing.i was able to get into safemode.I have a backup at the time of installation after which i have so many updates and softwares installed. If backup is restores 10s of software installation i loose. and esp. i want restore IE, Chrome and Firefox pages to restore. I have done restore point use (only 1 i have). Tried "last known good configuration", disabling some services incl. readyboot. no use.
View 9 Replies View RelatedBought lots of cheap RAM, so I thought I'd upgrade from my current 32-bit Vista to 64-bit Windows 7 Ultimate. Easier said than done. Since my DVD drive is busted, I opted to do a USB install using win2flash.
I got to the stage where I had to set up my user account and home share password, but when it rebooted after that, it gets to the Verifying DMI Pool Data and hangs. There are no other HDDs attached, only the primary SATA HDD. The faulty DVD is disconnected. I'm only using 2GB RAM for the install.
Now I can't even get it to boot from the USB...I've selected 'removable drive' on the boot priority list, but with the USB plugged in, it doesnt detect it.
My pc hangs when i insert usb. Initially hanging problem started when I mounted in daemon tools den when I inserted memory card reader and new when I insert my pendrive. Sometimes it also hangs suddenly. But everything works fine in safe mode. No virus -Quick Heal and No malware even in online panda security scanning.
View 1 Replies View RelatedI've had this happen a few times now - I tell my computer to shut down and it takes forever. It took at least a half an hour last night - and this was with no updates.
Is it my SSD? Do I need to do a reformat? Is it something else entirely?
when i login my user id then system is hanging out and running backgrond process,but when i login administrator account,then its working fine,how to rectify in my user id.
View 1 Replies View RelatedI did search out this problem...very old posts recommended I start a new thread.For the last 2 weeks every time I shut down automatic install...installs the same 8 updates.
View 9 Replies View Relatedfor 72 hours now im geting constant updates on windows update,windows even re instaled SP1 ...story goes my hdd broke down 3 days ago so i installed on a new hd win 7 home prem. x64 +sp1, since that time i had at least 5 hours of updates (inc. setup),funny thing is a friend did format on his pc today and we spend 3 hours updating (dont think he finished, instead he went to sleep) My q is (as stated above) is there a reason for the 34/72/4/3/2/1/silverlight new updates found????? did Windows 7 went unstable???its rly anoying (got some failed updates to)until 3 days ago i had no probs.
View 4 Replies View RelatedI bought my wife a Dell Inspiron Zino HD with Windows 7 Home Premium preinstalled about 3 years ago. It has been working well since, with a few hiccups here and there.Three days ago it started behaving really badly: it would boot normally up to the welcome screen, but when I click on one of the users icons it simply stays there with the rotating icon forever. It won't even show me the usual box to insert the password.If I boot to a safe mode (no matter which) it boots without problems, but I see nothing wrong with either the device drivers or anything else.
View 5 Replies View RelatedTwo drivers do not load at start up and causes windows not to load after updating Bios in raid system. The tdx.sys and serial.sys do not load. I just get a black screen in windows. The cursor can be moved for a short while then it freezes. I have done scannow and repair a dozen times with no results. I have also done chkdsk and all of these come back ok.
View 1 Replies View RelatedWhen I'm trying to install Windows 7, it gets stuck, generally at "Completing installation", but sometimes before, at the first background screen... I can only get to "Completing installation" using the safe mode install. I've tried taking all unneccessary parts out, and used several different sticks of RAM.I've also tried different hard drives, different DVDs (the current one is a retail disk), and a different graphics card. When it freezes, the monitor will just go black - into standby - and I can't turn it back on. I've tried disabling the USB ports in the BIOS.[CODE]
View 8 Replies View RelatedWe have a Maingear tower gaming system that is hanging after login for 20 to 30 minutes. This doesn't happen in Safe Mode; however we have reinstalled Windows 7 from scratch 4 times and reconfigured the SSD back to RAID 1 (former problem had them in another config). Patriot RAM 12GB passes with flying colors with Memtest 86+. We are at our wits end - tried just about everything other than dropping it off a tall building. We've removed extraneous cards, disabled legacy USB in BIOS, all to no avail. About 1 in 10 times it boots up and stays clean. Otherwise, it's useless and can't be used (just a spinning blue windows symbol).Even if you wait 1/2 hour and it clears up, it will rear it's ugly head later, making the system unusable.
This system has a clean install with only Zone Alarm installed (has the problem without Zone Alarm, too).We have very little to no BSOD and fan is running fine.Shall we pull the NVIDIA card?There was a shorted USB panel that was replaced by Maingear before this happened, but that may be a red herring. The panel works fine now.This is an i7 970 3.2 GHz 6 core system, ASUS X58 Sabertooth motherboardI thought it was hardware - not so sure now as Safe Mode seems stable
We have a Maingear gaming system that is hanging after login for 20 to 30 minutes. This doesn't happen in Safe Mode; however we have reinstalled Windows 7 from scratch 4 times and reconfigured the SSD back to RAID 1 (former problem had them in another config). Patriot RAM 12GB passes with flying colors with Memtest 86+. We are at our wits end - tried just about everything other than dropping it off a tall building. We've removed extraneous cards, disabled legacy USB in BIOS, all to no avail. About 1 in 10 times it boots up and stays clean. Otherwise, it's useless and can't be used (just a spinning blue windows symbol).
I thought it was hardware - not so sure now as Safe Mode seems stable.We have little to no BSOD, fan is running fine. Should we try removing the NVIDIA video card?This is an i7 970 3.2 GHz 6 core system with an ASUS Sabertooth X58 motherboard, 2 1 TB drives set to RAID 1 mirroring.The system is back to clean install with only Zone Alarm installed (problem happens without Zone Alarm, too).Is there any program that could give us insight as to what the system is doing when it locks up?This system had a shorted USB panel that was replaced by maingear and it is appears to have started around that time; but that may be a red herring. The USB panels works fine now (nothing is plugged into it right now).
I'm running: Dell XPS 9100 Windows 7 Ultimate 64-bit SP1 16 GB RAM Quad-core Intel 920 @ 2.67 GHz C: drive = 2 TB RAID-0 internal drive set (2 disks) E: drive = 2 TB RAID-0 G-RAID external array attached w/ eSATA (2 disks) Today I had a serious problem with Windows Explorer. I was trying to access a 3.2 GB TIFF file on my external E: array (used for backup, Second Copy is my backup utility) and sorted the directory by Date Modified to find the file.Windows Explorer hung and spun for 45 minutes until I had to power-switch my computer off. Froze up everything. Consumed up to 14 GB of RAM with non-stop page faulting. I even got a black screen trying to start Task Manager to kill the process. The black screen hung, then threw an error msg saying it couldn't open the window and said either press ESC or power-switch the computer. Hitting ESC worked once, but the next time I tried it 10-15 min later I had to power-switch the machine.Windows upon restarting applied some patches during the boot sequence in a place I'd never seen it do that before (while the colorful logo on black background is coming up, before the normal 'Windows is configuring your computer' message on the blue background when it's updating).Lost all my configs - Start Menu, Desktop, Firefox bookmarks, IE favorites, Photoshop actions/recently-edited-files, etc. My files and programs seem ok, though, so far.In Resource Monitor the Windows Explorer window had taken almost 100% of memory, 12 GB of my 16 GB. Photoshop could not even close.It had spun like that on my internal C: drive. But defragging seemed to fix it. On my external drive defragging doesn't help much. Tonight, after defragging my E: external array, I again tried accessing the same directory to work with an updated copy of the same TIFF file. Again I sorted the directory in descending order to sort the file to the top. And I tried to delete another 3 GB file in the same directory. Windows Explorer kept the resources hanging for 20-30 min instead of 45+ minutes. But this time Resource Monitor said Explorer was taking up from 12.9 to 19 GB of memory (on a 16 GB machine).This time Explorer did allow Photoshop to close. But I had to kill the Photoshop.exe process after exiting Photoshop, and some minutes later the memory usage dropped from 19 GB to 98.7 MB.Has anyone seen anything like this? what's going on?My E: drive is external, used for backup, is 75% full and has 240,000 user files on it + whatever system files, Second Copy control files, etc.
View 5 Replies View RelatedSo basically over the weekend I shut my computer down because I was not going to be home. On sunday I go to turn my computer on and it hangs at the windows logo splash screen after POST. So I grab my laptop and start researching. I am able to get into safe mode with out any trouble only when I start windows normally do I run into problems. So here is what i have tried and with no success. Start up repair w/ and w/out disc, system restore, I have reinstalled windows 3 times, with 2 different versions, pro and ultimate and on first reboot I have the same problem. I flashed my bios about a year ago and have had minor issues since then that were all fixed by using krndbg and windows symbols server as a reference...
View 5 Replies View RelatedI am trying to install Windows 7 on a new hard drive but it is hanging on the "setup is starting" page.
View 2 Replies View RelatedFor the last month or so, my home-built Windows 7 (Home Premium) PC doesn't always hibernate properly - it just hangs at the black screen and I have to hold in the power button for at least 4 seconds to 'power off' the PC.
I have no idea why this has started to happen and sometimes it works fine. Sometimes when I boot back up I get the message that Windows has recovered from an unexpected shutdown and will notify me if a solution is available, but no other details are provided.
I've checked the Windows system logs and can see no indication of what is causing the issue when shutting down. Obviously with the screen going black I cannot see any error messages either!
Spec:
Windows 7 Home Premium 32-bit
AMD Phenom II X4 955 Black 3.2GHz
Asus M4A88TD-M EVO/USB3 Motherboard
GEIL 4GB DDR3 Black Dragon Memory
ATI Radeon HD 4250
I have a peculiar problem with my lappy. Once I start it the system runs for sometime (usually for 15mins to 1-2hours) and then it suddenly hangs for 15-20mins. When the system hangs, the mouse becomes a circle and nothing seems to be moving. This problem started after I installed Spybot S & D. Although I have uninstalled S & D, the problem still persists. Currently I see some of the folders in my C drive appear like Hidden Files.
View 3 Replies View RelatedI just did a fresh format and install of Windows 7 because of some issues I was having previously. I formatted the drive, installed Windows and updated all my drivers and programs today.
Randomly now, the computer will 'hang' and be unresponsive for 3-15 seconds at a time. It seems multiple things cause the problem, sometimes it's loading a webpage, or opening a program, or navigating between folders in Explorer.
Prior to my format and reinstall I never had this type of issue before, and all the hardware aside from the DVD drive is the same, so I'm wondering if it's some sort of a Driver conflict, but I really don't know to tell.
Windows 7 and Applications Randomly Hanging For Several Seconds
View 1 Replies View RelatedWhenever my system is woken from I assume its sleep mode ( My power options are Sleep mode after 30mins and 'Turn off Display' after 10mins". I commonly find some programs will not work,they start to load up and then hang.A windows 7 prompt comes up and I then click 'Show problem details' to reveal the following below in the case of my attempted starting of Paint Shop Pro. This particular time around, Excel and Word opened all the way and also alowed data entry but as soon as you click on the round symbol in the top left corner to save etc it also did nothing but say 'program not responding in the very top bar.Description:A problem caused this program to stop interacting with Windows.[CODE]OS and most applications all installed on a 120gb OCZ Vertex 2 SSD with a 1Tb Samsung F3 Spinpoint drive holding all my pic,movie,sound files, word docs, excel docs etc. I try to save zero application files on the SSD but all on the HD.
View 9 Replies View RelatedAfter 2 month use it ,its window explorer sometimes for a long time (i don't know its time certainly)do not respond and dont show its items (for example:disc drives)
View 2 Replies View RelatedI did a clean install of windows 7, and things are not responding and hanging.My computer used to be a hp pavilion p71142 I kept the processor, dvd drive, ram, and hard-drive from it, but did my own build.Before I did my own build, I was having trouble with windows. It was slow and it got to the point where windows would not load/boot. I did a fresh install before I started changing hardware, but still slow.The only thing changed when my computer was hp is the graphic card and psu. But those worked fine for several months with no problems. I have got to the stage again now, where windows 7 will not load, and I can't even get into startup repair.
View 34 Replies View RelatedI had an OEM version of Windows 7 Home Premium x64 installed, and one day my windows started hanging after the windows logo (when the login screen would appear). I hadn't installed or updated any drivers. After being unable to fix the problem through restoring to a system image, startup repair, etc. I reinstalled Windows 7 x64 from a clean iso (no OEM ware). This meant I was missing some drivers. I downloaded the drivers from the Lenovo website, and after installing the video driver, the problem occurred again. The system does however work fine on Ubuntu 12.10 (Linux).
Using:
Lenovo IdeaPad Y560
Windows 7 Home Premium x64
ATI Mobility Radeon HD 5730