I ran Windows 7 Upgrade Advisor and followed all of the instructions to make sure my computer was ready for the upgrade. Now the installation won't run because it says I still need to delete Trend Micro Antivirus and Google Toolbar, both of which I have already deleted. I have searched my computer and deleted anything and everything that had Google or Trend Micro on it. It still won't finish. When I deleted everything, I used Control Panel> Uninstall Programs.
My computer is an HP Pavillion Media Center m8100n TV PC, Windows Vista Home Premium 32-bit, 3072MB System Memory, 500GB Hard drive, 3.0 GB RAM, and an AMD Athlon 64 X2 Dual Core Processor 5600+ 2.80 GHz.
Is there anywhere else I need to look for these files, or do you have any general suggestions on the upgrade?
I found a cheap card and my question is if it would play decently windows media center in my desktop pc, so I can turn it into something like a dvr. The card is a nvidia geforce 6200 512 mb
I'm in grave problem here. I just installed windows 7 x64 a few days back. And initially I installed the 32bit version of k-lite codec pack for my windows media player. The media center worked fine then. It was loading my ffdshow and ac3filter along as I checked it.But then yesterday I noticed that the same pop-up od recommended/express install of WMP came again. Initially I thought that it must be some bug or something, but then when my MKV and AVI files didn't work in WMC, I realized that somehow WMP x64 got triggered, and now it is using the x64 bit of WMP in WMC. And I just wanna revert back to 32-bit WMP in WMC.
I can't get eithe WMP or MC to play a DVD. I've set the region code. WMP acts like it will play, but then just goes blank, and MC says it cannot play the DVD. These are original discs, not burned copies. I have a custom built system, with 2 graphics cards (GTX 260 and a GT 220) 6 GB of RAM, and an i7 processor. Any help would be greatly appreciated.
I just installed Windows 7 over my VISTA OS on my new Toshiba Notebook. Since I have only 3 GB of RAM I installed the 32 Bit Version of Windows 7...
VERY DISAPPOINTED immediately as I encountered 2 issues
1. McAfee Security Center is alerting me that software is Not Compatible....
2. Internet Explorer barely runs... and when I exit IE, there is no less than 30 second delay before the window closes... even if I have just opened IE and immediately close (meaning nothing has cached to be cleared)..
When I open Windows Media Center - Internet TV is listed.On the windows website it shows that I should have that option.So, I assume I don't have something set up right.I have a TV tuner and I can record and watch TV just can't get to see the Internet TV channels.
I am running Windows 7 on a new computer with no TV tuner. I am unable to see Internet TV or Netflix in Windows Media Center. When I try the automatic download (Download Now) option, I get an error message that the Guide cannot be downloaded.After looking at these message boards, I have tried turning off my firewall before downloading and tried adding the Media Center programs to the allowed programs in my firewall application, but I still get the same errors.
I am building a Media Center PC. I have two questions relating to Windows Media Center:
1) I can watch TV via TV card, but can I watch TV from another source such as HDMI or AV from my satalite reciever or PS3?
2) Can WMC work with a dual monitor graphics card? I would like to transmit the media center screen via AV to monitors & speakers, while being able to use the PC for other use via VGA connection.
I used to run media centre wired and it worked fine. Trying to clean up cables running all over the place Ive tried wirelessly yet its almost to the point that it doesnt work at all as its incredibly slow and takes about a minute to react to controller input.Im running a TP-LINKTD-W8930N 300Mbps router.
in Win 7 Ultimate I insert a DVD, and the only options for playback are Windows Media Player and Real Player - with Vista, I used to have an option to play the DVD in Windows Media Center, which is what I want. Is there a way to get this option back?
I have installed Windows 7 Professional on my laptop and it has Media Center. But I can't see any way to access Netflix. Is Netflix support available on Windows 7 Media Center?
Netfix is shutting down Media Center when we try to watch a movie. It was working fine but this morning every time we try to access Netfix we get an error saying Media Center shutting down and restarting?
Have a Dell Vostro 3500 running Win 7 32 bit. When trying to view a pdf from within IE, it will attempt to open it with Windows Media Center. Adobe Reader has been installed, and when checking file assocaitions in Windows and IE, they are set to Adobe Reader. Now, if you save the pdf to the desktop, or some other location on the hard drive, it will then open with Adobe Reader as it should.
I have Asus 4550 video card The drivers are crashing in MCE very frequently ( Black screen and then BSOD and instant reboot so I can't even read the error) I tried driver that was optional in Windows 7 update, Catalyst 8.12, 9.1 and Windows 7 beta - they all behave the same way .
On my main computer I have added my folders of music and movies to the libaray ....
In the HTCP remote computer I set the home group etc ... I open Media Center .. I can scroll to shared and see my main computer but non of the files appear.
I have gone to the main computer and checked share this folder etc ... Still cant view the files.
While playing a DVD in Windows 7 Media Center (in version 7100, 7203, and 7260) that has been copies to the hard drive (in Video_TS format with AnyDVDHD-v6.5.5 running in the background), and using the My Movies plugin (tried both v2.54 and the new v2.55), if I press STOP on my Media Center Remote, the DVD stops, but is more in a Paused state. Let me see If I can clarify what is going on.
1. DVD's in Video_TS format play fine, can pause, FF, Rew, etc without any issues.
2. If I press stop, the DVD does stop. Then I would normally hit the BACK button to go back to the movie list. However, when I hit the BACK button I go to a new blank screen (with the media center blue background). I then hit BACK again, and am takin to a screen with movie details. If I hit BACK a third time, I would then return to the movie list.
3. However, once back in the movie list, I can see the stopped DVD in the lower left corner of the screen.
4. I can't seem to stop the movie like in Vista Media Center (which would automatically take me back to the movie list.
5. Also, if I click on the movie in the lower left corner of the screen, it comes up and starts the movie from where I left off. With Vista Media Center, a stopped movie would actually start over from the beginning.
Has anyone seen this problem, and know of a way to make it work like Vista Media Center?
need help in changing the DVD Audio setting under MC, DVD Audio setting menu. I want to change the audio setting to "Theatre Mode", instead of "Night Mode" ... to provide a full range of sound, but this option is grayed out. Does anybody know how to change this ..
I tried changing it under Media Player but it does not affect the Media Center setting.
I have worked w/ techs from all over the world to generate these REAL solutions--they might not solve ALL of your problems but WILL solve some. BEFORE you do anything--verify the correct computer time & time zone. In ALL cases if time or time zone was incorrect--re-install media center. Media center fails to recognize your set-top box or remote.After attempting a manual set-up w/ all possible codes & failure--exchange your set-top box w/ cable company for a different model as media center does not have all the codes within it--if not--borrow one--you will see.Verify the correct computer time and time zone.Media center fails to recocnize your IR cable sensor.Unplug & re_plug the cable. Relocate the IR sensor over the IR receiver on set-top box---use a bright flashlight to locate the sensor.Media center fails to download the correct channel guide
Verify the computer time & time zone. Re-install media center. Verify w/ cable company that you are slecting the correct guide download for your location. Verify w/ your cable company which guide you are viewing on your TV by having them tell you on the phone what program you are & should be viewing--careful--they make mistakes. Try reinstalling media center & selecting a different guide than you think is correct.Media center fails to switch channels automatically to record TV on different channels.Verify the correct computer time & time zone then re-install media center. Media center channel guide download options.Essentially, there are no options--automatic or manual--you cannot change what you selected in the set-up w/ out starting the set-up fresh.Re-set media center guide download to different guide
1st--verify computer clock is set to correct time zone & time--completely re-install media center.This is NOT possible--the ONLY way to accomplish this is to re-install or reset media center--go to settings, tv & start from scratch
1st--verify computer clock is set to correct time zone & time--completely re-install media center.This is NOT possible--the ONLY way to accomplish this is to re-install or reset media center--go to settings, tv & start from scratch
I'm leaving town for a few days and want media center to continue to DVR my shows in my absence. Trouble is, we've been having intermittent power outages in the area and of course the computer is turned off when this happens. WMC wakes my PC fine from sleep or hibernation, Can it be configured to power on the PC when necessary?
I'm trying to make my wallpaper but when I scale or fit it with desktop personalization it cuts off an important part of it or it doesn't cover the whole screen.I want to take a full screen shot in Windows Media Center but whenever I take the screenshot I just get a black screen and not the screen shot.So it seems it may be a bug or something and I'm not the only one with the problem.I followed those steps and added what they told me to with Regedit but it still didn't work for me. The author in the article says to "restart" media center does that just mean to close the program and open it again? I tried that and it still didn't work.
Using a Sagent SBT TVFM card connected to a Dish Network Dual Receiver as a 2nd TV connection of Antenna, channel 21. Receiver is an HDTV for 1st TV only, so taken from 2nd TV connection, not HDTV. Under XP, using Sagent's software, set to Antenna, channel 21, receive TV fine. However, under Windows 7 Media Center, set to same, receive a "No Signal" Error.However, if changing channel either one up or one down and back to 21, TV display comes on for about 10 seconds after which it goes back to no signal.Have updated the driver for this card to the latest Windows 7 driver, using Driver Agent.
I recently changed my cable plan to basic (channels 1-18) and since then, I haven't been able to see any of the shows that I have set to record. They have not saved. I did a search on any new files and even noticed one of my shows recording one night, so I know it is not the cable company.There's plenty of room on the hard drive and when I manually record and stop recording, it actually DOES save and place it in the recorded TV folder.It must have something to do with the automated recording feature and even though it seems a coincidence that this started when I changed my cable plan... well, I just don't know. I also did a rescan of the cable network and channels.
I am currently using Media Center but was wondering if there are anything better out there. I have alot of MKV files so I would need something that can play those.
Is there a way in Windows 7 Media Center to switch between video inputs without going through the hassle of repeating the setup process?
I have an ATI TV Wonder 650 PCI Express card that can accept input from the following:
* OTA digital signals including High Def. I like the way Windows 7 Media Center integrates OTA channels with the cable channels.
* Cable input from a small STB provided by my cable company for use with older analog TVs not served directly by my main cable STB. I believe this is now the only way I'm able to get regular cable on my computer. Channel-changing is accomplished by the Media Center remote controlling the small STB.
* S-Video and audio input from my main cable STB. With this input, Media Center sees whatever the main STB is tuned to, including Hi-Def channels degraded to S-Video quality. I can even see DVR playback and record it in MC.
I can also record Hi-Def signals on my computer using CapDVHS and a firewire connection. This didn't work under Windows 7 at all until I downgraded the IEEE 1394 driver to the legacy driver. But right now this is a separate issue from my main question, which is:
Is there a way in Windows 7 Media Center to switch easily between the cable input and the S-Video input? I can do this with a few clicks in ATI's MultiMedia Center software under WinXP, but that software doesn't run under Vista or Windows 7. So I'm trying to get Media Center to do the same thing. Sometimes it's easier just to record a Hi-Def broadcast directly via S-Video to edit it for DVD than to capture via firewire and deal with conversion then.
I want use a self build pc. The spec are Asus motherboard Intel socket 775 2.6 quad core oc'ed to 3.1 16 gig of 1333 ddr3 ram and a Asus Nivida 9800gt graphic card. Would this system be good enough to run and play tv programs?
