I've been using windows 7 for about a week on my Fujitsu A-6110 laptop.
Windows 7 (7057 32bit)
Fujitsu A-6110
Core-2-du0 1.5 GHZ
2.5 GB Ram
When I had windows vista home installed I could run this laptop on "power-saver" mode for 3+ hours, when I bought it a year ago maybe 4 hrs on power-saver mode. At this setting I have the laptop on the lowest brightness level.
Now with Windows 7 installed my battery lasts about 1.5 hrs on powersaver mode with the brightness turned all the way down. Its been 45 minutes now and it is at 52%.
Is there some kind of Fujitsu battery power software I need to correct this ?
I am having a problem with my Acer aspire s3 ultrabook (i7 2637 4GB ram running windows 7 home premium 64 bit).The fan is on all the time, really loud and noisy, and the laptop is usually heating up too rapidly, and the battery life is less than 1 hour on power saving mode!! I don't know how it became this way, but I think that I once downloaded the windows 8 preview, installed it, but nothing happened, and I could not detect it on the control panel or in my hard-drive, it just disappeared, and my laptop has not been well eversince. I am not sure If I want to restore it or if I have a restoration point before the problem, but I have important software I do not want to lose.
i am a new comer of laptop world.do u have any suggestion for increasing the battery life of my lappy?i run my lappy maximum when there is power nd never use more than 1 hour on battery as power came instantly.so my battery was always full n showing not charging.is it good to run lyk that or i have to discharge the battery fully nd after that again recharge it??
I recently upgraded my HP Pavillion dv6000 laptop (dv6815nr to be exact) from Vista Home Premium to 7 Home Premium and I can't say for sure but I believe my laptop's battery is working a bit better and longer.
At first, I thought it drained quicker than when Vista was installed but I think I was just speculating, especially since I hadn't had a good night's rest in a few days.
I'm very curious as to whether any laptop users, who have switched from Vista straight to the official release of Win 7, have noticed an improvement in battery life/performance?
So i got my laptop battery replaced since the last one died up on me and fortunately laptop was under warranty so DELL was kind enough to send me a free replacement battery.ow then maybe i was not following proper charging procedure/or overcharging my battery.o the question arises how to maximize the battery life and whats the proper procedure of battery charging??Yes i know there are tons of claims and counter claims regarding the "perfect" charging steps and guides.To all experts here,just wanted your comments on the same.
I have a HP Pavilion laptop and when I hover over the battery icon it tells me the percentage of battery left but I was wondering if their was a way to get it to show me how much time I have left? I have seen other pc's with Windows 7 have this and I was wondering if mine can do this also.
I recently bought an acer aspire 5000 laptop on craigslist to replace my macbook that was stolen from the coffee shop... looked for another macbook but couldn't find any reasonably priced so decided to give windows 7 a try. it has windows 7 professional installed. 1.8 amd turion 64 processor and 2 gb ram. it needed a battery so i got a new one thru amazon. installed the new battery, charged it until indicator turned green. my question is is 2 2 hours and 10 minutes reasonable battery life or do i need to calibrate the battery monitor? new battery has been installed for almost 2 weeks. my macbook got almost 4 hours on a charge...
I've recently acquired a relatively old, yet (wonder)fully functional, Fujitsu P7010D laptop.It's a 1.10GHz Pentium M, with 1 GB of RAM. I'm no expert in computers so let me know if there's something else that is necessary to mention. Basically it's a 7 year old laptop (since 2005), but it runs just fine.A lovely piece of gear. I was trying to install a Home Basic edition of Windows 7 on it with no success.Again and again I encountered a problem that only popped at the end of the installation, upon running Windows for the first time. I got a blue screen during "Starting Windows" (its animation never started by the way, FWIW), saying ( A problem occurred ... If this problem persists ... ) The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS. Technical Information:*** STOP x000000A5 (0x00000011, 0x00000003, 0x00000000, 0x00000000) Well obviously it's about my BIOS, so I downloaded what probably is the latest update from Fujitsu, which seems to be from 2007 (that's the date in the BIOS Info tab). After going through another Windows 7 installation, the same blue screen appeared again, sadly. The original Windows XP Professional edition does work completely fine, so is another "Windows Seven Royal XP SP3" that I downloaded from the internet. I only get the error when trying to install Win 7. Another thing to mention is, I could load Windows 7 on safe mode (hitting F8 during boot up), everything was functional there when I was messing with settings and USB / SD (Secure Digital) devices. No blue screen at that time. Tried to put it all simply and accurate, I'd love to get some help with thatI use it in my studies and there's nothing I want more than a comfy workspace on the go everyday and during lectures.
What i intel chip can I upgrade the fujitsu 1610 and the 1630 laptops to with Intel® Coreâ„¢2 Duo Processor SU9300 (3M Cache, 1.20 GHz, 800 MHz FSB) would to upgrade to i3 or i5 chip
I have just installed windows 7 on my Fujitsu Siemens amilo pro V3405 and my wireless is not working . The function F10 does not turn it on and it says it is working properly in the device manager, it is also enabled in the BIOS.
Well I just had the first bsod from my laptop and after the reboot it got stuck -> reboot and select a proper boot drive.I checked the bios and my hard drive was still being recognized. After it I turned the laptop off I took the battery out and I turned on the laptop. The laptop would run normally. Then I ran safe mode and it worked fine and normal mode too. So I'm wondering if it's something wrong with my laptop battery or just really bad luck. I still need to run it again with the battery.
I have a Dell Studio XPS 1645 which I have had for about 2 years so its out of warranty. My battery has stopped charging so the laptop has to be plugged in constantly.
I have a new HP Compaq laptop and the battery meter is in % which really doesn't tell me much. So I am looking for a battery meter that tells me how much time I have on battery power. I have looked at a few sidebar gadgets and couldn't find anything and Google really isn't helping me either so I thought I would ask here after 2 weeks of research and coming up empty like my battery.
I have a Toshiba L645-S4102 laptop. It is a dual core with 4 gig of ram running Windows 7.When I am running on AC power it is very "responsive" when I am on the internet going from web page to web page. When I am on battery it is sluggish and not near as responsive.Is the the way it is supposed to work or is the some setting in "power management" that I need to change?
I have a HP G71 with windows 7 64bit and its really annoying when I get to 13% battery it says low battery and when it gets to 8% it just shuts down... i was wondering if there was a way to disable that function or if there was a way to completly eliminate this function. Ive searched all the battery settings and have searched the internet and sadly cannot find anything about how to get rid of it.
I haven't verified this yet, but I wondered if it's a possible bug?
I bought a Dell XPS M1330 over a year ago and it came preloaded with Vista Home Premium. Since I want to keep the batteries in good condition I run the laptop with no battery connected and AC plugged in whenever it sits on my desk at home.
However, in Windows 7 it seems that Windows wants to put the laptop to sleep after 10-15 minutes if I do this. Since I have various USB devices plugged in, especially external storage, this is a problem. It goes away if I run with the battery plugged in but like I said, not verified yet.
We have an ASUS K52Jr purchased in April last year. At the start of this year the hard drive packed it in while I was trying to download something on ITunes and it would not start up again. We were moving and so didn't get around to taking it in for a couple of months. Anyway, a couple of weeks ago we went it in to ASUS and the hard drive was replaced under warranty (2-year warranty).The laptop is working fine now on AC power but the battery will not charge. I've tried shutting it down, taking the battery out, restarting it and putting the battery in while it's on, but no dice. I've also tried uninstalling and reinstalling the power management driver from "Device Manager". It was saying "plugged in, charging" on the battery icon but the "power bar" on the icon would stop moving within a few seconds of putting the battery back in and the power level would stay at 0%. Yesterday it started saying "plugged in, not charging".Is this because the battery was left in the laptop while it wasn't working? Is it just coincidental that the problem started after the hard drive was replaced?
The following text is the culmination of information from a failed attempt to get qualified advice via the Yahoo Answers route. This is why the text is not in a strictly narrative form. I thought it best to provide the accumulated data as is:I recently purchased a replacement battery for my Acer laptop (Acer Aspire 7740-5029). The battery is not a "manufacturer" replacement battery, but is of third-party manufacture.When I turn on my laptop (windows 7 HP 64bit), the laptop does not recognize that the [new] battery is inserted, even though the new battery is inserted. The laptop does function with the replacement battery, but it does not report to Windows the remaining charge, or even that the battery is even there. So, this being the case, I have no idea of the charge/time remaining as I use the laptop and is of no use to me because of that fact.
Technical information: *The factory battery (OEM) is a Sanyo AS07B31 (lithium Ion, 4400mAh, 48Wh, 10.8V, 6 cell). *The replacement battery is a Famis FAM18674 (Lithium Ion, 5200mAh, 49Wh, 14.8V, 8 cell)
Additional Details:For anyone who advises that I seek out and download/update drivers for the new battery, I cannot "download the driver", since in the Device Manager does not even recognize the new battery as being there as an unknown device or otherwise. I cannot update or install a driver for device that Windows doesn't know is even there.
Additional Details:One other person has submitted that the original battery that came withthe laptop contained DRM electronics, so that one cannot replace the OEM battery with a non OEM model.
Additional Details The battery status/plugged-in status icon is on the taskbar and is not hidden. I have always had my taskbar set up to show all icons and to hide none of them. With the laptop not plugged into the AC and the new battery in place, the only icon that is showing is the "no battery detected" icon. Even though the laptop is drawing power from the battery, Windows does not "see" that there is a battery and therefore cannot provide battery usage/time remaining, etc.
I went on crucial to check how many ram slots I have and it said I have two long story short there was no second ram slot and I should have not to try to take off my keyboard now it won't start I took out the battery charged it and what knot but it still won't start.
Some time ago I bought a battery for my laptop (Asus G51JX) and, it didn't work, I've sent it back and bought a new one with the same specifications (11,1V, 7200 mAh, 9 Cells).Now, when I start the computer on AC only, it works fine, but when I put the battery, the little icon on the taskbar goes up and down and then stops, If I remove the power cord, the laptop continues on but for my surprise it says "Plugged in, Charging" WITHOUT the power cord!, how is that possible? it is not from the OS because I tried another HDD with a completely different installation and it did the same, now my question is... Is it BIOS or the Motherboard?
My Dell M11x laptop battery had very little life left and would only run for about 20 minutes when unplugged from the adaptor. I purchased a new M11x battery, but seeing as I usually use my laptop plugged into the adaptor, should I save this new battery for periods when I know I won't be able to be plugged in?
I have a brand new battery in an Acer travelmate 5720. It has a BRAND NEW battery in it. at 50% power, the laptop dies as if the battery is totally drained. Will not even post to bios. Just dead.I adjusted the settings for the battery in windows to alert and shut down the computer at 50% to save whataver data is there, but this is not a good fix. There are no settings in the bios for adjusting the battery. What is going on in windows to cause this?I've read thru the threads and saw a lot of people with this problem only to be told that it's their battery or the laptop, and blah blah blah. Anything but Windows 7.
My Acer Extensa 5230E stopped charging so I purchased a new charger, thisn didnt work so I installed a new battery. The laptop came on but battery wasn't charging up.
I have an ASUS K50IE laptop that i had for 2 years now. been working fine until 2 days ago.this problem has been bugging me for the last 2 days. here's why.my laptop suddenly didn't detect my battery. thought it was because my battery was dead. I searched the net on things to do before "throwing in the towel" on my battery and today i came across a blog where the instruction was to uninstall the Microsoft ACPI compliant control method battery driver. I did just that and my battery suddenly worked! well sort of. now here's where it gets all weird.every time i open my laptop i do the following:1. plug in AC to laptop.. turn on laptop.3. unplug AC.3. laptop runs on battery.4. log on to windows.5. battery icon shows up as an empty charging icon then shows the "Battery is not detected" icon again.please take note that my laptop is still ON and WORKING. so this means (MAYBE?) that my battery is working.
My Gateway laptop MD-8718u will not recognize a new battery. It had been updated to Windows 7 and because of that update much of the
MD-8718u
software (like the camera) became out of date. I went into the BIOS setting and enabled the "recognize battery" command and upon turn-on it automatically becomes disabled. Gateway has a BIOS update for Windows 7. When I tried to install it, I received a "BIOS Unflashable" message or something like that. Being a integrated motherboard, the BIOS is probably soldered to it and difficult to replace. Can anyone tell me how to get my system to accept the new battery?
I'm having problems when my laptop goes to sleep, I'm not sure what happens but when my battery is low, it goes to sleep but doesn't wake up even if I plug the charger in. The only way I can get this fix is to restart it by shutting it down through the power button.
Today when I turned on my laptop, suddenly, there was a message that my battery has problems so the computer might shut down suddenly. I tried different strategies, like uninstalling the battery driver, or letting the computer completely die. When it turned off itself at 6%, I turned it back on, and it was at 2 minutes battery life. Then in a few minutes, it said 4 minutes battery life for 6%. Now, it's passed an hour, and it says 3 minutes, but changes sometimes to 1-4 minutes. The battery meter is completely wrong, and I don't know what to do since it is closing the computer way too early. I'm still not sure what the problem is.
