I am setting up a new laptop, Lenovo G570, and am having a rough time figuring out how this system works. I downloaded and installed the Open Office Suite and after it completed installation, I can't find the program on my computer. It didn't create an icon and I don't see it listed anywhere, either from checking for programs from the START BUTTON > All Programs or even from the list in the install/uninstall. I don't know if it matters, but I did not accept any of the accompanying other free programs
Today I decided to install some stuff on my computer as it was out of date..I installed Java, Flash player and adobe reader X but when I go to add/remove they are not showing up in that section?
This fault is occur a after using Iobit Uninstaller. I closed this program before uninstrallation process of selected programs completed. After this only 5 programs are showing. I restore syatem by Iobit Uninstaller. but no any change.I checked registry (HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall). There is only 5 keys. How do I recover these registry keys.
Ok this is a question I get when working on computers and the only recourse is an Operating System reinstall or in the case where I am advising someone on a heavy upgrade/new purchase. Me personally I don't really care why, I just need something simple to tell people when they ask me besides saying "Well you can't!"Why is it that when you reinstall Windows 7 or move from Windows XP (98,95 etc.) to Windows 7 (Vista, ya lets not go there) there is no way to keep your programs installed?
I'm looking to upgrade three computers running a Windows 7 beta build (two on 7077, one on 7068) to the new RC build. I've heard that it's best to do a clean install rather than an upgrade. I've also seen Microsoft describe ways to backup and restore files and settings when performing a clean install.
The biggest hassle for me lies in having to re-install all of the programs on the three computers. So is there any backup solution that would allow me to automatically restore/reinstall my programs after performing a clean install of Windows? Or can this just not be done with a clean install?
W7 Home premium. To clean up my desktop, I would like to transfer some seldom used programs to an SD card or a USB flashdrive. When using XP I would simply go to search,get all the files and move them. How can I do this on my W7 computer.
I've several users (windows 7 & XP) who have recently discovered a problem.After reboot, they were unable to open PDF's. I checked - and found Adobe reader gone.It reinstalls perfectly - and then dissapears again when rebooted....To date, I haveRun RKill, Unhide, Malwarebytes, F-Secure (the installed antivirus on the machines). ALL come up perfectly clean - nothing at all to report.I then ran ccleaner, just to try cleaning up the environment. Still didn't sort it, but that TOO dissapeared after reboot so it seems to be NOT limited to Acrobat reader.
een running Windows since 3.0, and am fairly comfortable poking around with anything under the hood. I've just bought my first Windows 7 computer, and it has me scratching my head on a few issues. I've done a search of the forums, but had no luck with one specific issue.I'm running Home Premium, and I have My Admin account and 2 separate user accounts. I install all programs using the Admin account. Some programs, such as Office 2010 and Adobe Reader, installed easily with the programs listed under each user's "All Programs" area on the start menu. Other programs installed and showed up under Admin's "All Programs", but will not show up in the other users' "All Programs". None of these programs asked if I wanted to install for just the active user account or for all accounts, they just installed.
I can still run these programs by doing a search and executing, so I have access to them. I know I can create shortcuts or pin them to the taskbar, but I really don't like the clutter. How can get these programs to show up under "All Programs" for all users?
I've installed ten programs on a PC with Windows 7. I need to install them on 60 computers. Is it anyway possible to create a kind of image of all these programs so I don't have to install each program separately on each PC?
Half a year ago my laptop's hard disk's clusters began to fail, so I finally had to change it with a Western Digital Scorpio Black 750 GB - 7200rpm (WD7500BPKT). When reinstalling Windows 7 Home Premium x64, I decided to dedicate the C:\ unit to the OS "only", and E:\ to programs and files of all sorts.
I've then installed all of my programs by sending them to their respective folders, E:\Program Files and E:\Program Files (x86) . But I'm now noticing all of them are running in x32 mode! The only programs running in x64 are those forcedly installed into the C:\Program Files folder (which my Italian OS calls C:\Programmi, although program installers install into C:\Program Files).
Is it that Windows isn't recognizing any Program Files folders but the default ones in C:\?
I recently formatted an sas raid array and it's now empty, I'd like to move some installed programs on a different ide drive to the raid array hoping to speed things up just a little. How can programs and folders/files be moved to a different location and have all the registry information changed so it's all correct within Windows?
i just built a new rig. i have my new hdd and my old hdd plugged in. new one only has windows on atm.whats the best way to transfer programs to my new hdd? waaaay too much to manually reinstall. I should of installed over the old hdd into windows.old I guess
I have just installed a new ssd into my pc and cloned the drive and everything has been up and running fine for a few days with no problems. But now all of a sudden when I go into add/remove programmes there are no programmes listed! yesterday they were all there...
I've got a laptop with a partition on the main drive that holds some of the programs that came with the laptop (fingerprint reader, webcam software, etc.), but it's a 28 gig partition, and it's only using 2. I was wondering how I would go about removing the partition, but keeping the programs on the it. Will it work if I just copy-paste them over to the main drive and delete the partition? This is probably a stupid question, but I figure it's better to ask and know than guess and mess something up. There's also a folder in the partition called drivers, so my guess would be the aforementioned copy-paste technique won't work.
Bit of a weird one here, I recently restored an old Dell Dimension 8250 to run windows 7 pro 32bit. It has 1gb of ram and i've heard its capable enough. The installation went fine and everything worked for a couple of days, but now any non original programs i install appcrash straight away eg. Firefox, daemon tools, utorrent.. Control panel wont let me uninstall them so i have to delete their folders and use control panel to remove them from list. Then i reinstall and it will work until a few restarts of the system.
Also it used to connect to the wireless but now it only sees my nieghbours networks and not mine which is weird as all other laptops in my house can connect fine?
This has been bothering me for a while, microsoft and many other companies offer every once in a while updates to their programs, adobe office, explorers etc. If I have an active antivirus program, how important is it to always update, for instance if the update is a security update. If I have a computer that I do not surf the net, only work on, but I transfer files to another computer back and forth with a usb chip. Or another example, if I connect the above computer only through outlook to get emails, do I have to worry about always updating microsoft office or adobe programs. Of course my antivirus is always updated.
I am going to reinstall windows 7 on my SSD but when I built my computer a few weeks ago I used a 60gb SSD for windows and a separate HDD for files, programs, etc. Now I am wondering how reinstalling windows 7 will affect the program files on the separate HDD. I'm figured the OS recognizes the programs on my separate HDD b/c it installed them there. But if I install a new OS how can I tell it to recognize the program file on my separate HDD? Or am I S.O.L. and I need to delete the programs folder and reinstall everything fresh with the fresh OS?
I have Windows, Adobe CS6 and a few other things installed on my SSD, which is C. But it only has 120GB so I can't install all my software on it so I want the rest of my software to be installed on my 2TB drive, which is F. I followed various tutorials on how to edit the registry. I am running Windows 7 Home (64-bit) so I edited the 64-bit version of regedit. That didn't work. It was still installing programs into my C drive. So I edited both regular regedit and 64-bit regedit and now certain programs don't work, such as Windows Media Player.Is there a way to do this correctly? I was thinking of switching drive letters in BIOS, but one, I don't know how to do that, two, it would probably create a bigger mess. I know Windows 7 "wants" to be on the C drive.[CODE]
I just got a new comp, w/ win7. I just took the HD from my old comp, and added it 2 the new system, hoping that i could run some programs from it on the new comp, (because i've lost install cd's etc..) Everythings fine except, I cant run any of the programs. Like, Old drive has Microsoft Digital Media Edition. I tried to open it & run the install, but the new comp says.. cant access registry. New unit is win 7, old one was xp, sp2. anything i can do to use my old programs? can i copy the drive onto the win 7 hd?
It's kinda distracting to see the highlight on newly installed programs on the Start Menu. It makes want to click it even if I don't even need to open the program anyway.How do I stop this from happening every time I install a new program?
Is there a utility for me to copy installed 32-bit programs form my new 64-bit Windows 7 computer to my rebuilt 32-bit XP computer, preferably with a LAN cable, and run it on the XP computer?
When listing the installed programs there is a column called 'location'. How and where does this come from in the installation program? In other words in Visual Studio 2008 where does one put this entry for the installation to cause it to show up?
i am using windows 7 ultimate x86. if i tried to open any installed programs then it opens windows media center only. please resolve this issue as soon as early.
I have a brand new Acer ax3910 with Win 7 home premium 64 bit already installed. My old computer is an XP home machine but I don't want to give up my software that I have installed on it It is all 32 bit the file system is FAT 32 and I want to transfer it to my new computer's harddrive. I have both computers and an external hard drive large enough to hold the data from the old computer. Of course I don't want to transfer the OS!
