I am having this problem for about a week, however I, nor others could solve this so far. My knowledge is too limited so here it goes:
Event Viewer
Critical
ID 41
Source Kernel-Power
Task Category (63)
Infrequent occurance, usually once or twice a day - now it just occured twice in about 3 hours. Doesn't matter if i am running any applications or if i am just idling at the desktop.
[Code]..
Kernel power error in event viewer. Is this a generic error that could be caused by other errors?
View 9 Replies View RelatedAs of recently, I just upgraded my system to the following configuration:
Intel i5 2500K 1155 socket CPU
Gigabyte Z68A-D3H-B3 revision 1.3 mobo
8GB Corsair Vengeance DDR3 1600 RAM
(2) 60GB OCZ Solid 3 SSDs (One for each partition that I'm running on my system)
2TB Western Digital SATA HDD
nVidia GeForce GT430 2GB DDR3 graphics card
Rosewill RD 500-2SB 500 Watt PSU
Rosewill Challenger Mid-Size ATX case
Prior to installing the software, I had tested the memory, CPU, HDDs, everything. All checked out OK. My system hosts two SSDs to run two partitions: One is Windows 7 Ultimate 64-bit, the other being Windows XP Professional 32-bit. The additional 2TB HDD is basically to store the tons of data that I have on, and I use the Windows 7 My Documents folders to have everything map to the HDD to acquire my data, download to it, etc.
The issue that I seem to be running into, is that every time I load up the Windows 7 partition, no matter how long I leave everything running, if per say I was to leave it running overnight, when I wake up in the morning, it will show that the PC has rebooted. Upon checking the event viewer, I am seeing multiple entries specifying that the error was caused by a kernel-power error, listed as event 41. Reviewing this info, I later noticed that it was causing a bugcheckcode of 265 everytime the issue occurs.
Ideally, I would like to think that it was hardware related, or driver related, as it mostly occurs when I play movies or videos, but when I boot the Windows XP partition, I never come across any of these issues whatsoever. Granted, the XP partition is used primarily for work when I do remote stuff from home, but granted I want to watch a movie on it I can also. Also, when loading the eventvwr on the XP partition, no kernel-power entries are listed. So clearly, this is occuring on the Windows 7 partition, and not the Windows XP partition. Since I dont really think this is due to hardware issues.
It is win 7 with updates. I built it a little over a year ago. It restarts all by itself. The event viewer shows a kernel error and improper shutdown. It may restart once or maybe twice a day or not at all but It happens too often and started a while back. I have checked temp using Sisoft sandra but its not overheated. The only thing unusual to me was the power supply fan seems to kick in twice. Its done that since it was new. It still does it at times but not always. The Power supply is a Fatality 550 w. The amd processor is low watts and so is the video card. I don't like the idea of replacing stuff just to see if it works. I don't know if ram or memory error could cause something like this?
View 10 Replies View RelatedBeen having unexpected crashes lately on my Pc. I am running windows 7 ultimate x64. And I have been getting the Kernel-power 41. The events before the crash are random. I have read a couple of posts on this forum but I cant seem to find the ones I used yesterday to link to. So I ran a cpu stress test for 8 hours and it was fine. And a memtest for 8 hours no errors. And I just finished a 8 hour gpu stress test and that went fine.
This is the log form the crash:
Code: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
[code]....
I have a problem with my 2yeard old HP pavillion dv966ea. I recently upgraded to windows 7 , and everythingh was good for about 2weeks, now it suddenly crashes and I get the same Kernel Power critical error as some other people mentioned. It crashes randomly, sometimes not in hours...but always when I'm starting a certain 3D client poker software, it freezes and I have to use the power button...after the restart even the HP logo at boot up is sometimes in colours. the only way to get back to normal is to run in safe mode and than restart. that normally seems to do it.I did a lot of research on that, reading all the related articles on this site as well, so here is what I tried so far.Clean installed Windows 7 (7600)tried with or without updatestried all the drivers on HP website and experimented with Nvidia driversupdated realtek audio driversit would be great to know, if this is software or hardware related.(don't have warranty anymore) computer never crashes with the pre-installed vga-driver, but I can't run the poker software with it. My guess is overheating...but I have no idea what or why?
View 9 Replies View RelatedRecently I've been having a really odd problem with my computer. When left on for seemingly random periods of time it will just restart for no reason. It's never happened while I've been doing anything important, but I sleep in the same room and I notice the bios beeps. When I come back to the computer after it's been improperly restarted I must log in. Upon logging in I am met with a dialog box that says windows has shut down improperly, etc, etc. I click check for solutions and the dialog box just disappears. Absolutely no result to doing that.I then check computer management to see what the cause is. I receive the following:
Level: Critical
Date: 1/11/2011 7:45:51AM
Source: Kernel-Power
Event ID: 41
Task Category: (63)
This has happened 5 times. I was hoping it was just something power related as my house is pretty old, but I'm using a surge protector so I'm not quite sure. Now that it's happened this many times I realize it's not just going to go away and it could be pretty bad for my hardware.
Recenlty I used to have a full memory dump when I used my other drive as a cache. I got this from an old crash report in event viewer on my win 7 pro,I made it the mini dump on my C drive for the last few weeks as im using an SSD. Though for a while I had no page file at all and noticed it wouldnt save a memory.dmp, so I gave C: 100-500 megs again as it keeps crashing. My old memory dump still on C drive from a month or so ago is 480 megs, so I cant upload that.
[code]...
Ok, my system is slowing down when I do large file transfers (transfer goes from 60M/s to 2M/s after zero io for about 10 min).
Anyway, I am now combing through the Event Viewer + resource monitor and I came across "event 35" with the source kernel-processor-power the text associated says "Performance power management features on process or 1 in group 0 are disabled due to a firmware problem. Check with the computer mfgr for updated firmware" - anyway I have a bunch of these errors.
Googled for 'event 35' and found nothing - anyone have more detail on this event and how to solve it?
For the past two months I've been having a series of seemingly random BSODs. I haven't exactly been keeping track of the error codes as of late, but I know I've seen 3 different ones in the past week or so. I believe after posting this I'll edit and update with the codes I get, but I can't offer much help now.As for the scenario, this mostly happens when I'm playing a game for a while; or when viewing full screen video for extended periods of time. The computer restarts, I boot Windows normally, and I'm greeted with a Windows Recovered from a Critical Event or something like that. When I click find solution, it searches for a while and replies that there are no fixes. It might just be me but I feel like it happens more often when the room temp is higher, and when I hear the fans spinning more. I'm thinking it's either overheating or my PSU isn't up to par with the rest of my system.I checked event viewer and I've got 17 occurrences of this in the past 2 months. I'm really worried my components might start to feel the effects of this if they haven't already.The only thing I've been able to find on the net with some substance is this, but I haven't been able to really find use for this as the directions aren't very clear.[url]...If it helps more to see the individual events in friendly or XML view just let me know and I'll post them, I just don't want to spam up a thread with a bunch of garble if it's not necessary.
[code]...
Built a new pc last month:
i5 2400
Asus P8H61-M-LE USB3
8GB Corsair Vengeance DDR3 RAM
Asus GTX560
Kingston SSD 64GB
320 GB WD Blue
Corsair HX620 PSU
All parts are new except: SSD, HDD, and PSU.
PC would reboot itself randomly and the event viewer says kernel-power event 41 task 63. My biggest hunch is the PSU because there was one time just after I built the PC, it would not turn on when power button was pressed. MOBO status light was lit. Tried shorting out the actual power pins on the MOBO but still did not turn it on. It would also sometimes turn on then off then on again by itself.
Also whenever I'm in CMOS setup, the various voltages seem to be unstable, it would go up and down by +/- .002 or something like that.
Because of those two points plus the PSU is already used and old (was prev used in a server which ran 24/7) I reckon it's the PSU. But before I go buying a new PSU, I thought I'd get your opinions.
I have a hp pavilion dv6 notebook running windows 7 home premium x64
specs: intel i7 processor Q20@1.6 GHz
6Gb DDR3 ram
640GB WD SATA HDD(5400rpm
the events in the event viewer just before event 41 are event ID1: system watchdog timer triggered and the file system filters 'trufos' and 'gzflt' are registered and added to the file system manager(event ID6) event viewer log:
- System
- Provider
[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
[code]....
I've been having this problem from some time now. My computer randomly locks up, it's not shutting down or going to blue screen. It just locks up and stays there until I hard reset the entire computer. My computer specs.
Intel Quad-Core i7-920 L3 Cache 8MB 2.67Hz 2.79Ghz 2793 Mhz.
Nvidia GeForce BFG OC MaXcore GTX 260 896 MB DDR3
6GIG OCZ Triple Channel DDR3
Gigabyte Technology Co, Ltd Untra Durable 3 DDR3 Freq 1366+
2x Terabyte Western Digital HDD
OCZ GameXStream Power Supply 750W
Micrsoft Windows Vista Ultimate x64
When I run SpeedFan 4.40 my CPU core temp for all 7 cores are sitting at about 42-45c without any applications running. While I'm gaming they normally hit about 50-55c. At first I though these crashes may have been caused by the CPU overheating to I was thinking about picking up an Hydro Series H50 CPU Cooler but I really doubt this would resolve the issue. My GPU cloaks at about 50-52c without applications running.. even that's rather high. But again, I don't think overheating is the issue. I've updated all the hardware in my computer to the latest that was available and BIOS. This problem started happening a few months ago, and today alone I've had 3 lock ups in the last hour.
I have not been able to play SWTOR MMO. During gameplay my PC will shutdown then restart to the safe mode menu. It happens randomly 2 to 8 minutes into gameplay. Currently this happens with this game only. I do not know much about computers but I noticed the event viewer says kernel-power event 41. The PC is brand new month old. I a little frustated because I do not know what to do?
View 9 Replies View RelatedBasically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors?PS - I think I accidentally got some TIM Cleaner spilt on the carpet. Might be nothing to worry about, but I did notice the "Harmful" hazard symbol on the bottle?
View 2 Replies View RelatedCan anyone help with the following errors in event viewer
Event ID 1001 DHCPv6-Client
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001C25E65B39. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Errors appear every 3 mins or so can you help fix please? has been happening sinc install.
Event ID 7000 Service Control Manager
The BANTExt service failed to start due to the following error:
The system cannot find the file specified.
Began this morning
Event ID 16385 Security-SPP
Failed to schedule SPPSVC for re-start at 2009-06-17T23:59:11Z. Error Code: 0x80070490.
Began 2 days ago
Event ID 2 Kernel-EventTracing
Session "Circular Kernel Context Logger" has failed to start with the following error(s) 0xC0000035
This has begun to appear this morning and every 2 or 3 mins
Clean install from Microsoft image and valid key from Microsoft.
I left my PC in the company of someone who might have done some meddling. It is configured to require the password upon re-opening it, but it is my understanding this can be by-passed. And, if true, knowing the time this would have occurred, can I use the Event Viewer to determine what actions might have been performed? Or is there a simpler method?
View 1 Replies View Relatedit says that in order to clear events, go to the Action menu and click 'Clear'. I have already saved everything in an external file but in the Action menu there is no option to clear.
View 4 Replies View RelatedUsing Event Viewer/Applications I was getting 5 error events each day. This had to do with a "search" for a file on an external HD. I have just formated the HD and now I get "Warnings" about the the same files. The HD is now blank.
View 3 Replies View Relatedi've just installed a fresh OS, Windows 7 Ultimate 64-bit and i have a error message when i reboot or turn off my PC. The error appears then disappears so quick i can't read it. Then in Event Viewer i have couple of Error ID 10, and i think that's the error message i get on rebooting/shut down, my PC.
- System
- Provider
[ Name] Microsoft-Windows-WMI
[ Guid] {1edeee53-0afe-4609-b846-d8c0b2075b1f}
[ EventSourceName] WinMgmt
[Code].....
Is there a way to delete some or all the entries in Event Viewer / Custom Views / Administrative Events?This things logs a bunch of stuff for Acobat and Spybot and for my 3ware SATA controller card. I do not need all this garbage piling up and was just wondering if there is a way to clean it out once in awhile.I looked and can not see away to do it.
View 9 Replies View RelatedI vaguely understand what the Event Viewer is but I do not have the slightest clue as to what the "events" mean. First I open event viewer then I click Administrative Events and it says that 199 events were found. Most of them are warnings but quite a few are errors. The warning that constantly showing up the most is Gigabit Network Connection Network link is disconnected. Another Warning that has popped up 4 times in a row was Request to physical disk 0 has timed out. The most recent error said that the application specific permission settings do not grant Local Launch permission for the COM server application with the CLSID. What does this all mean and should I be worrying?! I am so unbelievably concerned and confused as this has been my first computer build and I know little on the subject
View 5 Replies View Relatedhow to turn on the event viewer? Last logs are from 2010.
View 2 Replies View RelatedI haven't used Event Viewer before and I'm not sure how to interpret events. All I want is to establish whether a PC was a) on and b) in use between 00:00 and 03:30 on a particular day. What is the easiest way to go about that?
View 5 Replies View RelatedCan't seem to find anything releated to this event error "Kernel Event Tracing Error". I have this on a new PC and it bothers me. The eveint ID is #2.
View 2 Replies View RelatedKernel event tracing error ID 3. Anyone knows why is this happening? and whats the solution?
View 2 Replies View Related"The Windows logon process has unexpectedly terminated."What's this about, it's all over my event logs, should i be worried?
View 2 Replies View Relatedi am getting atapi errors in event viewer, the other day my monitor would not come out of power save mode. i have tester bother my hard drives and they pass. i have also checked my cables and they are fitted ok. i have never had this before and do not know what to do.
View 1 Replies View Related never had this before, each time after start up or restart when I open event viewer I get the message "add snap on console" then event viewer opens.
Is there a problem or can I do something so that event viewer open without message.
Windows 7/32 bit Toshiba laptop
How to Clear the Windows 7 Event Viewer with One Click ?
View 0 Replies View RelatedHow can I delete event errors in my event viewer? 41,000 event viewer events? Is that bad??
View 1 Replies View Related
