I haven't used Event Viewer before and I'm not sure how to interpret events. All I want is to establish whether a PC was a) on and b) in use between 00:00 and 03:30 on a particular day. What is the easiest way to go about that?
View 5 RepliesBasically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors?PS - I think I accidentally got some TIM Cleaner spilt on the carpet. Might be nothing to worry about, but I did notice the "Harmful" hazard symbol on the bottle?
View 2 Replies View RelatedCan anyone help with the following errors in event viewer
Event ID 1001 DHCPv6-Client
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001C25E65B39. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Errors appear every 3 mins or so can you help fix please? has been happening sinc install.
Event ID 7000 Service Control Manager
The BANTExt service failed to start due to the following error:
The system cannot find the file specified.
Began this morning
Event ID 16385 Security-SPP
Failed to schedule SPPSVC for re-start at 2009-06-17T23:59:11Z. Error Code: 0x80070490.
Began 2 days ago
Event ID 2 Kernel-EventTracing
Session "Circular Kernel Context Logger" has failed to start with the following error(s) 0xC0000035
This has begun to appear this morning and every 2 or 3 mins
Clean install from Microsoft image and valid key from Microsoft.
I left my PC in the company of someone who might have done some meddling. It is configured to require the password upon re-opening it, but it is my understanding this can be by-passed. And, if true, knowing the time this would have occurred, can I use the Event Viewer to determine what actions might have been performed? Or is there a simpler method?
View 1 Replies View Relatedit says that in order to clear events, go to the Action menu and click 'Clear'. I have already saved everything in an external file but in the Action menu there is no option to clear.
View 4 Replies View RelatedUsing Event Viewer/Applications I was getting 5 error events each day. This had to do with a "search" for a file on an external HD. I have just formated the HD and now I get "Warnings" about the the same files. The HD is now blank.
View 3 Replies View Relatedi've just installed a fresh OS, Windows 7 Ultimate 64-bit and i have a error message when i reboot or turn off my PC. The error appears then disappears so quick i can't read it. Then in Event Viewer i have couple of Error ID 10, and i think that's the error message i get on rebooting/shut down, my PC.
- System
- Provider
[ Name] Microsoft-Windows-WMI
[ Guid] {1edeee53-0afe-4609-b846-d8c0b2075b1f}
[ EventSourceName] WinMgmt
[Code].....
Is there a way to delete some or all the entries in Event Viewer / Custom Views / Administrative Events?This things logs a bunch of stuff for Acobat and Spybot and for my 3ware SATA controller card. I do not need all this garbage piling up and was just wondering if there is a way to clean it out once in awhile.I looked and can not see away to do it.
View 9 Replies View RelatedI vaguely understand what the Event Viewer is but I do not have the slightest clue as to what the "events" mean. First I open event viewer then I click Administrative Events and it says that 199 events were found. Most of them are warnings but quite a few are errors. The warning that constantly showing up the most is Gigabit Network Connection Network link is disconnected. Another Warning that has popped up 4 times in a row was Request to physical disk 0 has timed out. The most recent error said that the application specific permission settings do not grant Local Launch permission for the COM server application with the CLSID. What does this all mean and should I be worrying?! I am so unbelievably concerned and confused as this has been my first computer build and I know little on the subject
View 5 Replies View Relatedhow to turn on the event viewer? Last logs are from 2010.
View 2 Replies View Related"The Windows logon process has unexpectedly terminated."What's this about, it's all over my event logs, should i be worried?
View 2 Replies View Relatedi am getting atapi errors in event viewer, the other day my monitor would not come out of power save mode. i have tester bother my hard drives and they pass. i have also checked my cables and they are fitted ok. i have never had this before and do not know what to do.
View 1 Replies View Related never had this before, each time after start up or restart when I open event viewer I get the message "add snap on console" then event viewer opens.
Is there a problem or can I do something so that event viewer open without message.
Windows 7/32 bit Toshiba laptop
How to Clear the Windows 7 Event Viewer with One Click ?
View 0 Replies View RelatedI am having this problem for about a week, however I, nor others could solve this so far. My knowledge is too limited so here it goes:
Event Viewer
Critical
ID 41
Source Kernel-Power
Task Category (63)
Infrequent occurance, usually once or twice a day - now it just occured twice in about 3 hours. Doesn't matter if i am running any applications or if i am just idling at the desktop.
[Code]..
How can I delete event errors in my event viewer? 41,000 event viewer events? Is that bad??
View 1 Replies View RelatedEvent viewer of 17,264 warning and errors
View 4 Replies View RelatedWhile in the event viewer I thought I was deleting some entries in the summary View and ended up deleting the view. I think that I can re-create the veiew if someone can go in and select the properties of that view, then select Edit Filter, then select the XML tab and copy the entire query and then post in in a response to this post.
View 3 Replies View RelatedI have a FUJITSU LIFEBOOK LH531 (Intel Core i7-2640M CPU @2.80GHz, 8 GB RAM running Windows 7 Home Premium SP1 x64).Since 2 days the notebook has become too slow. The boot process is now taking 2-3 times longer. After boot, opening any program takes ages. Even when I click on START, the menu takes time to appear. I did not instal any new hardware or software when the problem started. Also I did varous virus/malware checks, nothing detected.But when I looked at the event log of my notebook - there were so many errors & warnings (see JPG attachment) - and this is affecting the performance.
A text version of the event log is below.
Level Date and Time Source Event ID Task Category
log.jpg 194K
3 downloads Warning 07/03/2012 10:28:42 Microsoft-Windows-Diagnostics-Performance 101 Boot Performance Monitoring "This application took longer than usual to start up, resulting in a performance degradation in the system startup process:
File Name : Skype.exe
Friendly Name : Skype
Version : 5.8.0.158
[code]....
Whenever I launch Event Viewer, I get this message. Ditto when I try launching Computer Management. I sometimes get a message about Adding a snap-in to console. But it never works. I ran SFC SCANNOW and it fix some stuff requiring a restart and is running clean now. No improvement.I tried going back to an image from several weeks ago. Event Viewer worked but when I ran SFC SCANNOW and restarted, it stopped working again.If I run mmc.exe, I get a single folder Console Root. Trying to launch Event Viewer from the File menu crashes it. Running services the same way works. Running Component Management crashes.
View 3 Replies View RelatedAfter updating my drivers today I am now getting the following Warning in Event Viewer: 'An error was detected on device DeviceHarddisk0DR0 during a paging operation.' I formatted my hd and did a clean install on Sunday and the warning wasn't there then or soon after. It didn't start to appear until I updated my drivers. I booted up at 5:28 and there are around10 of these warnings at boot up. If so what driver will I need to roll-back? I have an HP p6520y computer.
View 1 Replies View RelatedEvery 7 minutes this error is logged in event viewer.
I have wired connection disabled, wireless connection works fine. It actually works much better than it did with XP Pro. Lan transfers are much faster.
What's causing this and how to stop it?
I have replicated a strange occurrence involving event viewer data over and over in case I was going insane and I would like to share this story in case someone can explain this spooky occurrence! A while ago I had to use system image restore (windows 7 image restore) to restore my entire system from a backup on my external. Everything went perfect, but one day whilst exploring Event Viewer I noticed some recorded events logged that occurred AFTER my image backup and before the restore. (the very events that clued me into running my image restore in the first place). Intrigued, I low level formatted my C: drive and again reinstalled from my image back up and again all recent events up to the most recent were still there in Event Viewer. How is this possible? Do I need an Exorcism performed on my PC? I have since replicated this multiple times out of share fascination. Any thoughts or priests that I could call on?
View 1 Replies View RelatedHow to fix? > CAPI2 error in event viewer - Win 7 - Windows time stamp service and Event viewer error 7026?
View 5 Replies View RelatedSo I enter the pin to connect to windows media center, that goes through fine, and it starts contacting on my Xbox and just as it's about to "configuring your extender" it cuts off and displays "Windows media center has encountered an error while trying to configure your computer with this extender". I checked event viewer and the error is as follows:-Media Center Extender Setup cannot create an account for the Extender with ID: uuid:10000000-0000-0000-0200-0025AE2444B5.Error: The system cannot find the file specified.
P.S Tried with all Xbox 360 port forwarding set to open for those relevant ports. Certificate deleted. Network services set up correctly. Firewall been turned off. No anti virus enabled. DMZ filtered on xbox both enabled and disabled, IP address are not clashing and im connected wirelessly on both PC and Xbox.
I have noticed that my event viewer log is showing successful logins when my computer is off. Is this normal? Does the system ever "log itself in" while its off?
View 5 Replies View RelatedI have something going on but not sure what. I tried system restore which is not working neither. Tried multiple restore points. Says they are corrupted or deleted.The computer boots a bit slow, but it was never a fast booter. The info it
Event ID: 7000
Source: Service control Manager
Seems to to do with my Killer NIC, but i dont even run anything off it and always worked fine when hooked up
Event ID: 7001
Source: Service Control Manager
Locale ID: 1003
States: The HomeGroup Provider service depends on the Function Discovery Provider Host servicewhich failed to start cause of the following error: The service cannot be started, either because it is disabledor because it has no enabled devices associated with it.I run a Quad Core with a geforce 560 and 4 sticks of ram. I ran malewarebytes and found nothing. It started when a program froze my computer.I rebooted, and when i did, my clock was messed up on wrong time and this error has showed up on every reboot now.
The screen will lock up, and pressing numpad/CtrlAltDel elicits no response meaning that it's a total freeze, forcing me to reset. Pulling up event viewer, it seems like 2 events occur right at the point of freezing. FilterManager seems to have some correlation with my issue, though that's the extent of my knowledge on what's causing the freezes.
Log Name: System
Source: Microsoft-Windows-FilterManager
Date: 1/12/2013 1:21:54 PM
Event ID: 6
Task Category: None
Level: Information
[Log] .........
Kernel power error in event viewer. Is this a generic error that could be caused by other errors?
View 9 Replies View RelatedI'm having problems connecting some devices (android apps) to my computer via my wi-fi. I am usually able to solve the problem by running network diagnostics, but after awhile, I'll start having network connectivity problems again.
Whenever I run diagnostics in these situations, this error is shown in Event Viewer:
"WLAN Extensibility Module has stopped.
Module Path: C:\Windows\system32\athihvs."
I also receive the error (in event viewer) on a fairly regular basis:
"Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x2225D3CC6415. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server."
I have checked, and my router and WLAN card drivers are both up to date. I'm wondering if these errors are what is causing my app to lose connection?
I'm having a problem with the Windows 7 CD burner when trying to burn a data CD-R or CD-RW in Mastered (CDFS) format (Windows 7 Home Premium 64-bit). Whenever I use a new or blank disc and then select the Mastered option, when I re-insert the CD after burning it says it's in UDF format. What is more, I then have problems trying to open or copy files from the CD - files won't open.
Bad block errors in the event viewer etc. These errors are seen when trying to use the CD on any computer, including the one it was recorded on, and I've tried several different makes, types and speeds of disc. I can record in CDFS format using the Windows 7 CD burner if the CD already contains files which were recorded in that format using a 3rd party application or another computer.
This is happening on two Windows 7 computers. I have considered using the Live File format (UDF) instead, but when using Windows 7's burner to format the disc it reduces its capacity by about 130MB and the data won't fit any more. I know I can use other CD burning software (and already do), but there are occasions when the Windows burner is the simplest option, so I'd like to get it to work properly.