Im not sure if this is the right section, if in the wrong section a mod can move it. Well anyway i will be installing windows 7 over my current windows 7 RC install soon. Im planning on creating two partitions, one for the OS and another for Music, videos, pics etc.
But my question is would it be smart to create a partition for program files? because if i have all my program files in in drive D lets say, and then i format C to install windows 7, the programs wont work because the necessary registry values wont be registered. Whats the point of having a separate partition for program files then?
I really want to know this so that when i format and finally install Windows 7 i will then know what size to create the OS (C: ) partition.
I've just experienced my 'external hard drive' not letting me access any data. I put 'external hard drive' in apostrophes, as it's actually an old SATA Internal Hard drive, in an external case.The hard drive was partitioned into two partitions. One about 100GB large which had Windows 7 installed on it, from when I used it inside my desktop. Another which was encrypted with TrueCrypt and was about 800GB large. I tried loading the second partition with Truecrypt, but the computer locked up. In the end I had to turn off the computer manually by the power.I booted up and I couldn't see the hard drives at all - not even in Computer Management. I turned the HD power on and off a couple times and eventually they were viewable - only they'd turned into three partitions, with an extra 24GB partition as the active, primary partition. It might've been that way before but not viewable in My Computer. Now I can see the sizes of the partition in Computer Management, but they show as 0MB in My Computer, as if I'd not formatted them. When I try open them in My Computer though, it lets me open them - it doesn't tell me they need formatting.I'm currently running TestDisk, but it can only see the 24GB partition. how I can recover my data?
Edit: TestDisk Results: No Recoverable Partition Found.Also noticed file system now says RAW.
While installing Fedora 12, it deleted all the 5 partitions i had currently i have only 1 partition since fedora messed everything up all the data has been lost and m not even able to logon to Fedora i have deleted fedora and m in the process of installing XP during the installation of XP, i deleted the one partition i had and then formatted it using the NTFS system so that i cud install XP. is there any way i cud recover all the data i had?.i had 5 partitions with c,d,e,f and z drive total 500 GB..
A little background on my system's configuration. My system was/is configured is a two disk RAID0 with a system partition and two other partition for Windows and programs. I'm wanting to migrate the partitions/data to a single disk system. I created a system image using both the Windows backup software and Novabackup. The problem I'm having is restoring either of those images to a single disk. Is it possible to restore an image from a RAID configuration to a single disk? If so, what am I missing? No matter which image I try to restore from, I either get a fail from Windows or can't be done in so many words from Novabackup. I just want the RAID image on a single disk.
One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs Partition 2: home partition for himself Partition 3: home partition for his mother Partition 4: home partition for his sister Partition 5: home partition for his other sister Partition 6: shared partition for some photos.
So I've been using my 64GB ssd as my windows 7 boot drive and i have a 1TB hdd as my data drive. Recently the my computer has begun to freeze up with errors like "explorer.exe" has stopped responding or "windows" has stopped responding and half of the time when i try to boot it says it cant find windows. This has lead me to believe that my ssd is dying despite being only a year old. I need to RMA my ssd but to do that i would be losing my boot drive for weeks. So I thought id try to create a system image so that i can simply put my boot drive on my hdd, but when i try to create the image it says that the image would be 711GB because its including all of my hdd (which contains all my user libraries and downloads). My question is: how do I make windows stop thinking that my hdd is a system drive so that I can create a reasonably sized image, or more generally: how can i easily move my boot drive to my hdd? Also, I've read some posts about using "easyBCD" to accomplish the latter but I'm not sure that's exactly what i need in this situation.
just did a fresh install of Windows 7 Ultimate on my second pc, all went well apart from it gets to amd data change update new data to dmi then..... stops, it wont budge, i haven't touched anything in the bios or added any new hardwear.When i reboot, same again, went into the bios and made sure i have it set to boot from hard drive first.
forum i have a question. I have a kingston 30 gb ssd i use as my windows drive, and a 750 gb wd hdd for data/game storage. I have heard that you can ghost a file on the data drive into the x86 folder so that all new installs go there and then you still recieve most of the benefits of your ssd w/o clogging it up. I have an amd based system (dont know if that matters or not)
I am thinking of replacing my old Dell using XP, with a modern one. I partitioned the old one so the OS & programs were on one partition & documents on the other. I suppose this will not be necessary with the large hard drives available now? I don't foresee having any problems backing up the documents. What do others think?
I have two physical HDs in one of my machines. The first is C. The second physical HD has two partitions, which are D and E. This drive has failed, and I took a HD from another machine, and added it to this one we are talking about. Windows 7 sees this HD as D, because unlike the one that failed, this "new" one was originally formatted with only one partition. I would like to get Windows 7 to see this HD as D and E (and transfer files as necessary), so when I load my music template from my sequencer, it will find all of the necessary audio files.
If the second HD is only D, the template is not going to be able to find all of the files automatically, even if they are physically on the D drive - this is b/c the sequencer is looking for some of the files on E, which doesn't exist. I can browse for, and point to the the files on D, but it gets to be a PITA if I have to open eny old templates or projects. So, what I would like to do is somehow get Windows to see that second HD as D and E, instead of just D. Is there any trick that I can do to make this happen? Trying to avoid having to reformat.
I just partitioned my C drive and now have an I: drive that I use for data, music and movies and such.My question is this: if I have to do a system recovery. Will I lose that partition? Or will Windows 7 re-install on the C: drive without touching that partition?
This is a 1TB HD with Win 7 pre-installed on a 100GB partition (C and a remaining 809GB or 811GB depending on what I use to look at it on a second partition, I would like to partition the remaining 811GB (D however I ran into a confusing snag. Even though Windows shows only 2 partitions,when I run my partition manager it shows that there are 4 partitions, 100MiB NTFS, 101GiB NTFS, (extended) 809.65GiB,sda5 809.65GiB NTFS.
.I originaly partitioned my hard drive and I dual boot with XP and 7.I would like to know how to merge the two partitions back and just use Windows7.Just remember that you are not dealing with a rocket scientest here,hope to make it as easy as possible.
why i chose 2 partitions, i thought it could help me organize my stuff better.Now all my stuff is on OS C: Since it's split into two there is less space available..it's screwing with some of my programs that depend on each other.
I have a 320GB Seagate Hard Drive. It has 2 partitions and I used 1 for projects and recordings, and the other for backup. Now I have a WD Caviar Blue 500GB that I plan to use for projects and recordings. Is it possible to backup to both partitions on the Seagate hard drive? Someone on OCN told me that you can't already do it with native Windows backup.
I want to merge two partitions, D: (doens't contain nothing) with F: (my partition of backup, contain many files).But, is there any problem if the partition D: is on the left side of the F:? It's possible to do this with the Disk Management in Seven?
What is the policy for Removable USB Drives in Windows? Does it only recognize the first partition? Is there any difference between FAT32 and NTFS? I am asking because time to time, I am not able to see the partitions in Windows, and I wanted to learn about its policy (rules I mean) about Removable USB Drives (What I mean is Flash drives I guess, when the USB Drives are connected; it is not showing up in the drivers, but in Removable Devices).
is it possible to merge these 2 partitions together? F into D? installed RAM is 4GB(2.99GB useable) <- can somebody explain to me what does this means? does another 1.01GB is wasted?
After discovering Speccy, I saw this and now I'm curious. Do I have one hard drive that was shrunk to have two 70 GB partitions or do I have two hard drives? If they are two partitions, can I merge them(formatting XP)?
I decided to delete my recovery partition since I can't burn them to disks because I don't have the appropriate program. So now, I have 10.88GB of unallocated space that I want to merge with Partition (C). How do I do this?
im due a fresh install of Windows 7 64bit the way i do this is to make a copy of my existing OS and put that on a second drive, i then keep this and use it as my main OS, i then put a new copy of Windows 7 on my main drive and move the stuff over from the back up that i want to keep, this way i know i wont lose anything. this time i want to partition my main drive and have dual boot one for normal use and one for gaming but when i did the back up the hdd drive i was using had a partition on it and the OS told me that i had to delete the partitions so i could install Windows 7. is there something i need to do first to be able to have 2 OS's in 2 partitions on one drive or is it just not possible to do?
I just did a reformat/install of windows 7 home, i created a new partition to install the OS to(422.32 GB), after installing windows 7 to the new partition and deleting the "old installed OS" I tried to delete the partition and merge it back with my new "C" but the extend volume is greyed out and i cannot figure out how to merge the partitions back into one.
In error from a brand new hard drive (and build), I installed the 32-bit version of windows 7 onto my SSD. Upon the product key screen was when I noticed the issue. I input my product key, got windows loaded and then booted from the 64-bit CD instead.Here I chose the custom install feature and went to overwrite my old partition from the 32-bit version but it would not let me. I tried deleting it as well and I could not. I've since loaded 64-bit windows but I do notice that approximately 8Gb is down on my SSD.So at this point, I think I may have 2 options but I'm not sure how to go about either:1) Format the SSD completely so it is in a state like it came out of the box.2) Delete the old partition and gain 8Gb of space on the SSD while using 64-bit windows.
I'm currently running Windows XP SP2 and wanting to upgrade to Windows 7. I have set aside a 20GB partition and i'm wanting to make a fresh instal, not fussed about keep XP. I have 2 internal hard drives @ 149GB each. But, Win 7 fails to recognise them even when i have set a partition on the empty HD! It says something like 'setup was unable to create a new system partition or locate existing system partition ' What does this mean?
I can't delete my windows 7 partition. I tried command prompt and diskmgmt.msc, but whenever i right click the partition it shows the 'delete volume' option in gray and i can't click it. When i did it in command prompt using the diskpart command it didn't work. I used override and i got this "Delete is not allowed on the current boot, system, pagefile, crashdump or hibernation volume"
I have been using my Acer laptop for the past 2 odd years with a single partition (288GB). Now I wanna manage some stuff, mainly to classify things better and also hopefully to boost the performance of my system as everything getting cramped up in a single partition isn't the best thing to do, isn't it?
