Dell Studio 1535 I've successfully installed Windows 7 on a clients laptop, the thing is the touchpad won't scroll anymore after having installed Windows 7.I have all the drivers and everything, even the driver for the touchpad.I just can't figure out to set/configure the touchpad to scroll again.
Note: The touchpad itself does work, but it just won't scroll.
Ive got a Dell Studio 1535 running Windows Vista.
I want to upgrade to Windows 7, used the Upgrade Advisor, no problem.
The only thing I need before I want to install Win 7 are the drivers.
HOWEVER Dell hasnt got any drivers suitable for my PC!
When I go to the download page, it only gives 2 options:
-> Windows Vista 32 bit
-> Windows Vista 64 bit
What am I to do?
I really want to upgrade, but if the drivers are missing, my PC wont work!
Do the vista drivers work for 7 as well?
I slipped a dvd into my drive, carefully as usual, and for some reason, my eject button and manual eject (from computer setting) won't work. Anyone else ever had this problem?
Can someone please advise?
Today, my copy of Windows 7 Ultimate finally arrived! Installation was no problem and most of the drivers are installed. However, I still miss a few.
I miss:
Name: A base system device
Developer: unknown
Location: PCI-bus 3, device 1, function 3
Name: Unknow device
Developer: unknowm
Location: on Intel(R) ICH8M LPC Interface Controller - 2815
Windows automatically installed all the other drivers.
But I cannot find any driver for the devices listed above.
Does somebody know where I can find them?
Its been about 2 week since I installed Windows 7.I love the new OS but I am still missing some drivers!!!I tried to contact Dell, and this was their answer:"You need to download the Windows 7 drivers"Like I dont know...But there are still no Windows 7 drivers on the Studio 1535 driver download page.This is the information Windows gives me:Name: A base system deviceDeveloper: unknownLocation: PCI-bus 3, device 1, function 3Name: Unknow deviceDeveloper: unknowmLocation: on Intel(R) ICH8M LPC Interface Controller - 2815I read something about Ricoh drivers or something like that, but I cannot find any solution... One of the missing drivers listed above is for the remote control (i think)Because it doesnt respond to any button I push on it
View 6 Replies View RelatedI have Windows 7 32-Bit installed onto a Dell Studio 1535 laptop, with an Intel hi-def sound card. The OS recognized the card on boot, but won't let me install the Intel IDT drivers and doesn't recognize the mic port.
The sound card is such that the rear output changes to a microphone input when you tell it to through the IDT drivers, and I'm guessing the default drivers don't know how to handle that functionality. When I try to run the Intel drivers from a disc it gives me a "device is not found" error.
I replaced vista with win 7 and touchpad won't scroll.
View 1 Replies View RelatedMy dad is working on a Dell Studio 1735 laptop and can't get the scroll bar to work. He's tried going into mouse settings but a scroll bar option wasn't there. He also tried to update drivers and check the touch pad settings to no avail. Anyone know the solution? In dell support there is no win 7 64-bit option.
View 5 Replies View RelatedI have a Vaio laptop with Windows 7. the scroll feature on the touchpad is ever so annoying. How do I remove this option? I have gone to the Start button, then mouse features but have not found a way to disable the scrolling.
View 1 Replies View RelatedI have a Toshiba with Windows 7. I need help with getting rid of this stupid scroll.
View 4 Replies View Relatedwhen I open PDF file in Fx (open in new tab), I can scroll only that PDF file, however if I change focus to other tabs it doesn't work (external mouse is not affected, only touchpad).Closing PDF tab restores scrolling ability.
View 1 Replies View RelatedMy laptop touchpad mouse can't scroll up or down. When I go to Control Panel > Mouse > I can't find the wheel tab..?
View 5 Replies View Relateda few months ago I called dell to have something on my computer fixed (I don't remember what it actually was). The dell rep remotely took over the computer and cleared out a bunch of the programs from startup in various locations. Since then I have not been able to use the scroll and multi-touch features on my mousepad. I can't find where to turn this back on and re-installing the driver has not helped.
I have:
Dell XPS Studio 17
Widows 7
whenever i go into the control panel to look at the mouse settings it says: Unable to connect to the synaptics pointing device driver.i have tried reinstalling the driver but nothing happened also the windows on my laptop keep going over the taskbar that is unrelated but that's also irritating and i don't know how to fix it and its making the task bar pointless because i have to minimise everything to find it.
View 1 Replies View Relatedi have new laptop hp pavillion dv6t-6b00 notebook. i installed windows 7 ultimate on it. the touch pad has no scrol bar line on it. one of my friend told me that you can enable it from mouse properties. so i tried every thing there is no virtual scrolling button or if i go to personalize> mouse pointer> there is no gestures button .
View 1 Replies View RelatedI have researched this problem quite a bit and tried several possible solutions that have worked for many users yet nothing had worked. I have tried several different drivers, tried tweaking settings with no solution in sight.
I am using Windows 7 build 7022.
Can anyone advise?
I have installed the Elan touchpad driver I can't get it to scroll correctly. In addition an Elan touchpad .exe run box comes up at every boot which does nothing when Run. I finally browsed to it in the Programs folder and deleted that .exe file so it wouldn't pop up at every start. It shows installed in the Device Manager, however doesn't have the functions I had in the Samsung factory install. This and the sound driver don't seem to work right when installed, as though there is more software needed that isn't on the Downloads page at Support for NP-RF511.
View 9 Replies View Relatedcant find quickset drivers. downloaded drivers for vista and xp but it dont work. so i need your help
win 7 (7600) x32
dell studio 1535
The CNET site, Studio 1535 review shows my Intel T8100 as a 64 bit VISTA OS but is came with VISTA 32. I would like to reformat and load a fresh 64 bit Windows 7. Is this possible, and will 32-bit Vista drivers work with a 64 bit Windows 7 OS?
View 3 Replies View RelatedI'm trying to install Dell Studio 1535 Bios drivers from A02 to A06 , but i get error : Error! The BIOS update could not be performed ,because a valid ROM image file could not be found . If can it be , because Windows 7 can't read this driver?
View 5 Replies View Relatedhow can i get cannon printer driver for my dell studio 1535 laptop. os windows 7...??
View 1 Replies View RelatedI upgraded my operating system from Vista to Windows 7 and the integrated webcam is not functioning well?
View 1 Replies View RelatedI recently bought a new dell laptop. Im running a Windows 7 Home premium x64. Now since the start i have noticed a few weird things happening. 1. When ever im using a browser ie. Internet explorer and google chrome, my browser scrolls down automatically to the bottom page even if im typing or watching a video.2. when im playing a fulls screen online video my video tends to auto pause.3. when ever i donot have a browser open and i open any other window/application everything minimizes, though i haven't noticed these issues when im playing game in full screen.
View 1 Replies View RelatedI need the Webcam driver for Windows 7 - Studio 1749 laptop
View 1 Replies View Relatedmy computer said there is no webcam driver detected.please install the webcam driver usinge the resource cd and launch webcam center again.and my dell webcam it blank and black.
View 1 Replies View RelatedWhere can I get bluetooth drivers for Windows 7 64-bit? My bluetooth mouse stopped working after upgrade.
View 4 Replies View RelatedI couldn't find another thread relating to the exact same problem, as they have hijackthis logs etc. whereas I cannot get onto my laptop to do anything at all.I am running a Dell Studio 1555 with Windows 7. When I turn it on I can hear it boot, but everytime the screen just stays black. I cannot start it in safemode or do anything. It is just blackI can think is that the other day I used CC Cleaner and it did some things to the registry. Otherwise I have not downloaded anything or done anything that should suddenly make it stop working.
View 14 Replies View RelatedI have got Laptop Dell Studio 1458 which came installed with Windows 7 64 bit edition. Recently I formatted and installed Windows 7 32 bit OS of my own. However I am unable to find Windows 7 32 bit edition compatible Drivers for Ethernet etc for my dell laptop. How or from where can I download 32 bit windows 7 compatible dell drivers. I am unable to use ethernet ports on my computer.
View 1 Replies View RelatedSo yesterday I was busily doing some work and watching something on ITV Player when shock crashed along with Microsoft Office 2007. From nowhere it started continuously beeping at me. It was rather high pitched and didn't sound as though it were coming from the speakers. I flipped it over and had a listen and it sounded as though it were coming from inside. I switched it off and back on again but the beeping simply started up again. Continuously beeping for maybe two minutes of so, frozen on the Dell start up logo, unable to enter either boot menu.
However after about five mins, I received the message: "Operating system not found". I tried inserting my windows 7 disk to do a clean install but no drivers were found. I shut it down and unscrewed the back, turned it on and had a listen. It sounded as though the hard drive was beeping, but I didn't think it even had a speaker, so I am assuming whatever is beeping is because of the hard drive. I took it out and reported the.laptop, same results as before but without any beeping at all and a much faster boot time.
Just after the October 22 release date, Dell posted some new graphics and other drivers for Windows 7. How can I tell whether they are needed, or should I assume that Windows Update takes care of making sure the latest drives are installed?
View 3 Replies View RelatedI have a Dell studio laptop that keeps rebooting. I turn it on an it gets to the Dell logo and then reboots. You can select the F2 setup option or the F12 Boot options but this does nothing. If I select F12 then try to select diagnostics it reboots, whatever option it just reboots. I tried to start it in safe mode by pressing delete this did nothing just re-booted and also pressing F8 again nothing. I tried to boot the Dell windows CD that cme with the laptop but nothing it sounds like its trying to start but reboots before anything happens.
View 1 Replies View Related