so after my latest rookit infection (and subsequent re-install of win 7 and ALL my stuff.) I was curious if it was possible to make an image of my system when it's running perfectly. All drivers installed, all games installed, everything set up. So that if I ever had a problem, I could just reinstall windows and have no problems!
View 7 RepliesI want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
How to Automatically Create A System Restore Point at Startup ?
View 0 Replies View RelatedI have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View RelatedI have made a reformat on my hdd to install Win 7. But during install this message comes" Setup was unable to create a new system partiton or locate an exsisting system partiton" And if I start my computer without a DVD this message comes in the end "BOOTMGR IS MISSING"
View 1 Replies View RelatedI have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
I want to create a system image on my NTFS formatted portable WesternD HDD. Now It has about 250GB of space left(the portable HDD), and the Laptop PC that i want to create the image of, tells me I need about 199GB for the system image.Then first time I created the image, it gave me a failure message saying I should run a CHKDSK /R and ty again. I ran a CHKDSK /R on the external drive and tried making a system image again, where it got about halfway and gave me the same message. What is going wrong every time?
View 6 Replies View Relatedi am trying to back up and create a system image but evert time i do i get this error THE SYSTEM CANNOT FIND THE FILE SPECIFIED OX87007002, i have window 7 64 bit professional i think the problem is with this system reserved partition
View 6 Replies View RelatedI want to restore my computer to May 31, 2012 11.am so I type this in and I'm told the restore point has been created successfully. However, when it finishes I see that the computer will be restored.
View 11 Replies View RelatedJust picked up my first Win7 computer, and it came with no discs. No surprise there, but I'd like to make some recovery discs, but not the kind that Windows says you can make. I don't want access to tools for recovery, I want access to a physical install of the OS and the drivers.
Like the discs enterprise people get when they buy their machines. I must be googling wrong, because all I'm finding are results that teach me how to create a recovery tools disc, which isn't quite what I'm looking for.
when trying to create a system repair disc, i get the following message: system repair disc could not be created, the parameter is incorrect (Ox80070057)
View 2 Replies View RelatedKnown good cd drive & dvd drive installed in my pc.Tried discs separately in each drive three ways.Have tried Search box typing recdisc.exe.Have tried going through Control Panel to reach the part to create repair disc.Have tried using an elevated prompt & then typing recdisc."System repair disc could not be created. The parameter is incorrect. (0x80070057)."
View 5 Replies View RelatedMy Laptop came preloaded with Windows 7 Home Premium and I would like to create system recovery disks. I have a drive labeled RECOVERY (D. How do I create recovery disks from this drive?
View 9 Replies View RelatedThe disc I had received complementary is unfortunately, broken. Can I create a system boot disc? so that I can format my computer when my heart desires.
View 2 Replies View RelatedI want to create my own folder that is unsearchable, just like how the contents of c:windows do not show up when you do a root search. I have the 'dont search system folders' option set, and sure enough I have tested it works with c:windows, however my new folder is still showing up. I created a folder c: est, and did a 'attrib +s +h +r test' from a cmd prompt. The command took (the folder is now hidden), but windows does NOT seem to consider it a true 'system' folder (the contents STILL show up in a search). What am I missing here? How do I flag this folder as a true 'system' folder so the contents wont show up in a search.
View 2 Replies View RelatedWhen I use Win 7 backup, it gives me the option each time I create a backup to create a system image. I created a system image on a CD a couple of days ago. Why does it ask me if I want to create another each time I do the backup? Is it talking about creating one on my hard drive, not a CD?
If it's just my hard drive then perhaps I should create one each time, but creating one on a CD is onerous. Plus, if this is the case, (that it wants me to create a CD) I don't know how that's to be done if the backup is on a schedule in the middle of the night.
whenever i try to install win 7 rc1 64bit on a freshly "formatted" partition (as windows doesn't seem to fully format them prior to selecting them) i get the above error message
i am running on a GA-M55plus-S3G
2 samsung spinpoint sata hardrives and an athlon x2 64 4200+
edit: okay so what i did now was to install an older IDE hard drive and create a new partition on there
it created 2 partitions in total
one was 100MB in size and labelled as system partition the other was the rest of the disk size (it's a 200GB WD caviar) i could start installing win 7 on the larger partition without problems
it's not the best solution as i wanted to run Windows 7 with a raid0 sata array with a new drive i am about to buy but i guess i'll have to bear for now.
can we write a windows 7 system restore point in a dvd or cd coz some virus delete the system restore point in windows 7 therefor using this cd /dvd can we restore the system can't we but c drive System Protection is on?
View 2 Replies View RelatedI'm getting this error when trying to install windows 7 rc x64:
"Setup couldn't create new system partition"
Then it asks me to check the setup log, but I don't know how.
Trying to install onto the 2nd partition of a 160 gb drive, split in half. It's disk 0, the first partition is active primary and has XP. The second partition is formatted ntfs primary and when I select it in windows setup, that's when I get the error message. I let windows 7 delete it and create a new partition and formatted it, but when I select it to install windows onto, it give me the above message.
It's a SATA drive running in native IDE mode on an AMD790GX board with a Phenom II X4 940 and 4 GB RAM.
It doesn't seem like it would be a drivers issues, since Windows sees the drive and both partitions, allows me to delete, create and format partitions, just won't let me install onto it. Any ideas?
hey how do u create a system repair disc?
View 1 Replies View RelatedI have Win 7 64 bit installed on my laptop as well as my desktop. System images for both are on external HD's.
On the laptop, I have created a system image on blank DVD's using DVD-R's. No problems -- I can restore from the DVD's.
However, when I try to create a system image on blank DVD-R's on my desktop, I get a message saying something like, "format was unsuccessful." If I use a DVD+RW the process runs to completion and I can restore from it. I had to use RW's because I don't have and +R's.
I get the same unsuccessful message if I try to format a blank DVD-R with Win 7.
My DVD burner on the desktop says it is a +R. Does that mean I can't use -R's.
I've no idea whether this is a Win 7 problem, burner problem or a problem on my part.
Would someone please try to straighten out the dense old mind?
How to Create a Windows 7 System Repair Disc ?
View 0 Replies View RelatedHow to Create a Windows 7 DEP System Properties Shortcut ?
View 0 Replies View RelatedHow to Create a System Restore Point in Windows 7 ?
View 0 Replies View RelatedI'm doing a fresh install on windows 7, instead of a disk it's on a thumb drive
I have a 500 GB Partition I want to install windows toI went through setup and formatted the disk when I try to continue with the installation and get this error.
Is giving the following error when trying to install windows 7 in HD:
"setup was unable to create a new system partition or locate an existing system partition"
I've tried to do some procedures, but also can not create partition, do not know what else to do.
My Windows 7 32 bit laptop has crashed. I do not have a instalation disc and like a dumb fool I never made a recovery disc. Can I make a recovery disc on a 64 bit Windows 7 that a relative of mine has. Can I just download it from a link and burn it onto a blankd dvd?
View 2 Replies View RelatedI'm trying to created a posready 7 embedded image, and I want to be able to supply a system repair disc and system image with it, should the disk hardware fail for the end user.
The procedure seemed straightforward, and I'm running it straight after a fresh posready install to test it. I have 2 USB DVD drives attached, one to write the image to, and one because it needs the installation media as part of the creation process. from control panel, backup and restore, click Create a System Repair Disc Choose the dvd writer to use to create the disc and insert a blank disc, I choose E: in my case which has a blank DVD-R "Insert Windows Installation Disc", OK I put the Posready7 install DVD in the other DVD drive F: , click continue... System Repair Disc could not be created, The system could not find the path specified (0x8070003) I have tried inserting instead a Windows 7 Professional DVD at step 3, have tried with a single DVD writer, swapping discs, have tried on a couple of different posready7 installs, one with the 100MB system reserved partition and one without.
I've googled the error code and got lots of results suggesting corrupt user profiles etc, but these are new installs.
On the Backup and Restore page, it lists the two Thread title options?-
I read that you can't restore individual files from system image, but I'm wondering if I need to create both in order to do an emergency system restore using boot disc/or... (D: drive)?
I have a Windows 7 Home Premium 32-bit with SP1 (OEM). I have already installed the Windows and activated online. Also i have installed all my motherboards drivers such as audio, lan, raid and gpu.The whole process took me around 1 hour 30 mins.Next month i'm planning to format my hdd and clean my pc (cleaning the dust from the fans, cpu).I do that every month.In the future i don't want to install Windows all over again (by installing it from a disc) it takes too long for my liking. Also with my OEM version of Windows i think you're only allowed 3 times activation by going online, then after that you have to call up Microsoft which is a hassle.What i want:
* I want to create a full system image of my whole hdd/windows/pc
* After a month or so i insert a disc or from another hdd and copy the entire image to a new hdd or a formatted hdd and have all my previous windows all installed with activated and with all drivers.
I have a PC organized like this:
C (SSD) "SYSTEM": Contains all system folders EXCEPT *Users* and *ProgramData*
D (HDD) "DATA": Users, ProgramData, and "Media" (Media is in another folder, not under the Users or ProgramData)
Z (HDD): Normally only mounted into c:BackupDrive, this volume is ONLY for backup. I am now realizing that I need to mount it as a separate volume (Z so that Windows Backup will back up to it. Also, it looks like a Windows System Backup will always include it's data in the backup, which is not desired. So I will change this.I am happy using Crashplan to back up my user directories, ProgramData and Media.I would like, however, to create a System backup that will allow me to get back up and running quickly, but it doesn't have to contain all my media and all user files.However, when I create a System Backup, Windows doesn't give me the option to exclude certain files on the D drive, since Users and ProgramData reside there. Next to Users is a Media folder with 100s of GBs of stuff I don't need included in a disaster recovery plan.Can I get Windows System Restore to create a backup without these files? Can I get it to exclude specific folders in my user directories (Music, Pictures, non-essential stuff)?