Cpu Not Booting After Hibernating
Apr 6, 2011
I have an Intel D5400XS Motherboard. I started up my machine as I always do from hibernate mode in Windows 7 but this time the computer did not boot into Windows! I have a blank screen, the monitor light is amber, the fans are spinning but no hard drive noise like I usually hear. I see that the Port 80h POST code says E6 which refers to "Started connecting drivers" I have tried resetting CMOS by removing the battery and waiting 1 hr, still get the same problem.
View 1 Replies
ADVERTISEMENT
Mar 4, 2012
How do I get my laptop out of hibernating?
View 5 Replies
View Related
Jan 18, 2012
I have just installed a Forex Trading Platform that needs my PC running all the time,otherwise it pauses. If i am away from my PC for more than a minute or two the system hibernates and i have to login in again,How do i stop this from happening
View 1 Replies
View Related
Nov 26, 2011
Windows 7 started failing to hibernate properly a few months ago now and although I don't see a BSOD, a memory dump is produced and when I boot up again, Windows tells me it has recovered from a serious error. No crashes experienced during normal usage though
View 5 Replies
View Related
Aug 14, 2011
I moved Windows 7 from a partition on a physical hard drive to a new SSD. It was pretty easy, and everything works great except the hibernate function. The screen goes blank for about two seconds and then comes back on. Nothing power-related appears in the Event Viewer. The PC restarts, shuts down, and even sleeps with no trouble. I ran powercfg -h off and then powercfg -h on to delete and recreate the hibernation file,no offense, but no lectures about how a "clean" reinstall is required or even recommended when moving to an SSD. That's just not true. Similar to upgrading to a larger physical hard drive, all you do is copy the partition to the new drive and continue on your way.
View 3 Replies
View Related
Dec 1, 2009
I have set my laptop to go to sleep when I close the lid. According to the online help, it should stay in sleep mode unless the battery gets low, in which case it hibernates. Well after a while of being asleep, my laptop goes into hibernation regardless of the battery life remaining. This can happen after an hour or so.
How can I stop it from hibernating, or is this normal?
View 3 Replies
View Related
Aug 13, 2011
I reinstalled the same version of Windows 7 (7601 x64) on my netbook that I previously had on it. Prior to this, when I left the netbook plugged in overnight, it would go to sleep mode after 10 minutes, then sometime during the night always power off completely (hibernate). This would allow me to take it with 100% battery and power it up later when needed. Now after the reinstall, it goes to sleep mode, but always remains in sleep mode and will never hibernate. I've scoured the power options, and confirmed that hibernate is enabled with powercfg. Is this just a simple option I'm over looking? The only difference is that I installed SP1 this time!
View 3 Replies
View Related
Jun 6, 2011
Recently i have been having trouble getting my Dell Studio 1747 laptop to hibernate or sleep. When i go to start and hit either sleep or hibernate, the screen shuts off but the computer never fully goes off. The fans continue to run and the usb power lights are still on. It will stay like this for hours. I have let it go all night before and the only way to shut it off is to hold the power button and do a force restart. I have had this problem before. After a different discussion post we determined it was a power settings problem and after I set hard disks no not shut off the problem was solved. I had to reinstall my OS and when i put the same power settings back, the problem continued to happen. But i still think it may be a power setting. I have all of the current drivers installed and my computer is free of any viruses. Im running Windows 7 Pro x64 but it was also a problem with home edition.
View 3 Replies
View Related
Dec 16, 2012
So if i click hibernate and repeatedly press my power button, until the small light with the cylinder icon at the bottom front side of my laptop turns off, my laptop powers back on once that light goes off, once it powers back on it resumes Windows again and everything is amazingly faster than before. It goes slow again once i shutdown or restart, so i do this every time I'm gonna use my laptop. I press the power button while it is hibernating, it's not fully hibernated and turned off while I'm pressing the button, and it never really hibernates, it just boots back up while it's trying to hibernate lol..
View 2 Replies
View Related
Nov 1, 2009
I installed Windows 7 this week on my notebook Dell XPS M1710.
Everything is good working, except one thing :
When I close the screen, so the notebook go hibernating, and then I reopen it, the notebook leave the hibernating mode, and here the screen goes dark, the brightness is very low, despite the brightness setting is at max. The only solution is to reboot the notebook.
So now I can't use hibernating mode, I have to always shutdown the notebook.
Does anybody have the same problem ?
View 2 Replies
View Related
Sep 17, 2011
For the last month or so, my home-built Windows 7 (Home Premium) PC doesn't always hibernate properly - it just hangs at the black screen and I have to hold in the power button for at least 4 seconds to 'power off' the PC.
I have no idea why this has started to happen and sometimes it works fine. Sometimes when I boot back up I get the message that Windows has recovered from an unexpected shutdown and will notify me if a solution is available, but no other details are provided.
I've checked the Windows system logs and can see no indication of what is causing the issue when shutting down. Obviously with the screen going black I cannot see any error messages either!
Spec:
Windows 7 Home Premium 32-bit
AMD Phenom II X4 955 Black 3.2GHz
Asus M4A88TD-M EVO/USB3 Motherboard
GEIL 4GB DDR3 Black Dragon Memory
ATI Radeon HD 4250
View 6 Replies
View Related
Jun 19, 2012
Earlier xp but after win7 the booting not show xp at booting time
View 1 Replies
View Related
Jun 6, 2012
In case of windows hibernating or log off, the backup operations are suspended, delayed? What happens in that case? Otherwise, while backup is running, it prevents the system hibernation?
View 1 Replies
View Related
Jun 18, 2011
Two dell support technicians have said to go to factory settings butSpecs:64 bit windows 7 home premiumIntel core i3ATI Mobility Radeon HD 4330Service pack 1Any other info you want, just let me know. I'm so desperate for a solution that isn't a fresh re-load of windows.
View 2 Replies
View Related
Jan 6, 2013
I have four physical drives in this system. Until last month, I was booting from a drive with three partitions, C:, D:, X:, where C:contains Windows 7 Pro; the others are data. The other physical drives are also data (not bootable). I added an SSD and cloned C: onto that drive with Acronis Trueimage. In order to get it to boot, I had to add an entry to the BCD on what should now be the old c: and keep that as the boot drive in my BIOS. I'd really like to NOT be reliant on that spinning drive to boot, so I found EasyBCD. Booted from the SSD, I told EasyBCD to designate c: as the boot drive.When I tell the BIOS to boot from the SSD, I get a Disk Read Error. So I go back to booting from the spinning drive.
View 3 Replies
View Related
Jan 15, 2013
Booting from USB instead of DVD, I wanted to boot from the USB instead of doing this from the DVD knowing that the DVD contains the Windows 7 Operating system. All what I did is copying the DVD to the USB.
I managed to give the USB the first option for booting, nevertheless, the machine doesnt respond to boot from the USB
What might be the issue? What should the USB contain to be bootable?
View 2 Replies
View Related
Oct 27, 2009
I guess the problem is related to the setup and installation process I'll leave it here, feel free to move the thread though.
I downloaded Windows 7 from DigitalRiver, made a bootable .iso, burned it and started the setup. I then formatted C: where Vista was located and had Windows 7 installed onto C:.
It works perfectly with the DVD inserted, but whenever I try to boot without the DVD the Bios says something like:
file:/windows/system32/winload.exe
status: 0xc0000428
Info: windows cannot verify the digital signature for this file
What I did now was to go to the setup and open up a command line and then I did chdsk /R which said the partition was NTFS, could not be locked and that it was read only.
Then I did ScanOs which gave me 0 installations found. Afterwards FixMbr and FixBoot which were "completed successfully" and last but not least RebuildBCD which said 0 was fixed but it was again completed successfully.
Long story short, nothing has changed. Still the same error.
Plus: After that message in the bios I can press either esc or enter. Enter will then get me another screen where I can choose the OS I'd like to boot and it only says Windows Vista there but that selection takes me back to the initial "digital signature blabla" screen.
So, is there still a little part of Vista left somewhere that messes up the boot process or what's up?
View 2 Replies
View Related
Jan 7, 2010
I have an acer laptop that i upgraded from vista to 32bit windows 7 which was installed a few months ago through my USB because my cd drive doesnt work. Now I am getting the unmountable boot volume blue screen error so I am trying to boot the installation from my USB. It gets past "windows is loading files", then it goes to starting Windows with the logo... but after that I get a black screen with just the mouse arrow.
View 9 Replies
View Related
Oct 15, 2009
Ok so i have created a VHD of my system (dual boot of xp and Windows 7) using Disk2vhd. It's now sitting on my USB HDD which i am able to create a new VM in XPM using that as a HDD. Turned on the VM and everything looks fantastic. Selected windows 7 boot and it booted fine. But when i go to boot Xp it just load and then goes black.
I think this is a restrictions on XPM not allowing to boot to a Xp VHD, Y/N?
View 2 Replies
View Related
Apr 22, 2012
Computer will not boot up bios check seems fine It shows a black screen can not get into F8. Im running win 7 home premium 64bit on an hp pavilion a1220n. I have tried a system restore from win boot disk will not restore. I tried start up repair and it cannot detect any problems
View 1 Replies
View Related
May 17, 2012
It started like this. I was searching something at the internet and then it restart. first it says no monitor Or no connection to the GPU then when I turn off the PSU or the whole system I waited for about 20 minutes then turn it on again but after like 10 minutes it turns off again but the 2nd time success the restart it goes to the bios etc (normal restart without me doing something) then it always restart this probably the 6th time.. and I only get chances to stay on windows maybe the record only is 20 mins then restart again. so when I manage to restart and success go to the desktop menu There is check for solution problem then I click more details and it says The error is "blue screen" which I din't see any bluescreen and below there are number I only remember is something like this "100000007"
View 1 Replies
View Related
Jun 18, 2012
i recently bought a OCZ Vertex 3 SSD 60gb (though i think i should have gotten the vertex 2 as my mobo is SATA 2) and installed windows 7 professional 64bit on it. 2 days later i realize i left some important configurations on my original boot drive (Western Digital Caviar Blue 500gb)game configurations, currently downloading/ unfinished torrents, seeding torrents, etc. were all there.i need to know how to boot back from my WDC 500gb drive instead of my SSD. i remember seeing the os boot list on bios when installed win 7 on a laptop drive for a ZBox that didnt come with a dvd drive.
View 3 Replies
View Related
Mar 23, 2012
I just recently upgrade my system's OS from Win XP to Win 7 but I'm facing some problems with my Win 7. Whenever I boot up my system without my GPU installed, it boots up just fine. But as soon as I install my GPU i.e., GT 240, Windows 7 doesn't respond after "Starting Windows" screen or simply fails to boot. I also faced the similar problem while installing my Windows 7. I resolved that one by removing my GPU while installation.
View 9 Replies
View Related
Feb 3, 2013
I have a Medion Laptop and it froze so I forced it off. Now when i load it in any mode (safe mode freezes after avg file) It will go to a black screen or a 0xc0000009 I/O error message.I've run it in start up repair and there aren't any system restore points available and start up repair took 17 hours before i decided to turn it off! What is going on!? My hardware doesn't make any strange sounds and my bios recognises my Hard Drive.Luckily, there's nothing important on the laptop so i don't mind if we have to reset it to factory settings as i have the Windows 7 installation disc as well!
View 8 Replies
View Related
Jan 19, 2011
I have a Dell Inspiron E1505 with Windows 7 (32bit) and it's not booting. I tried safe mode with and without networking as well as the startup repair and system restore options.Startup Repair basically said that it couldn't repair this computer automatically and this: [code] System Restore said that it couldn't access a file and something about anti-virus as well as "An unspecified error occurred duing System Restore. (0x 80070005)"..Seems like my only bet is to do something with Command Prompt... but I seriously don't have the slightest clue as to what.
View 7 Replies
View Related
Apr 12, 2011
Booting with windows 7 and xp SP3. I tried installing 7 first and then XP and it only booted xp! So i tried in reverse putting XP then 7. BUT THEN ONLY 7 BOOTED ! I cant get the option of which id like to boot i have 2 sata harddrives.. I just cant seem to make it work any help?
View 1 Replies
View Related
Apr 15, 2011
My CPU was working finw with windows XP. it has only 512+128 mb ram..I just want to test if Windows 7 works on my PC.I instered Windows 7 and during installation when it rebooted the initial screens where Pentium 4 ht comes becomes blue.after that its hanging there
i opened PC and removed the CPU battery and tried, result was same
i removed RAM and installed again. same result
i removed all the datacard to dvd,hdd, and floopy same result.
View 3 Replies
View Related
Sep 2, 2012
I've got a new copy of windows 7 (32 bit version) I have got 4 GB ram only 3,25 in use (like I had on the XP version, running on the same PC) and after I boot up the PC I just look at the desktop, play with some random games, create and delete folders, do some little stress to the RAM or sometimes just doing nothing. The only boot that works is safe mode and its variants. Things that I've done in the past 7 days:
- I checked RAM integrity - no errors
- Everything is up to date (drivers, everything) - it BSOD'ed even with a fresh copy of Windows 7
- I use wireless if that is a problem, found some errors about it and will post them after this list
- Enabled services and disabled them VIA msconfig (toying around I found out that it WONT CRASH with any internet service on normal mode)
- I checked Windows 7 compatibility and it's 100% compatible
- Tried to update BIOS but I don't think it will solve anything anyways
- Used dozens of registry cleaners (CCleaner and lots; lots more) - still nothing
- Put a second HDD on my machine with Windows 7 same version, it still crashed, but on the other machine the second HDD works great.
Event 7001: The Computer Browser service depends on the Server service which failed to start because of the error: "The dependency service or group failed to start. Event 10005: DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server: {9E175B6D-F52A-11D8-B9A5-505054503030}
View 3 Replies
View Related
May 15, 2009
I have this machine that was dual booted with XP and Win 7. Everything was working gravy. I put up the RC on the machine and now I get NTLDR erros when trying to get into XP.
Physical setup is as folows:
Sata Drive with three partitions (XP, Storage, Storage 2)
IDE drive with One partition (Windows 7)
Boot order is Sata, then IDE.
The boot loader comes up and I can get into windows 7 no problem, but when I choose the XP I get NTLDR errors.
I redid the boot loader with easybcd, but I still get the errors, I've copied NTLDR and NTDETECT.com on just about every drive except my card reader (haha).
Can someone walk me through getting XP booting again? I tried doing the /fix mbr thing but I can't remember the password for the XP install to get into the recovery console.
View 2 Replies
View Related
Jan 1, 2012
I have a Windows XP PC which I want to completely delete everything and throw it in the garbage. Problem is the CD-rom drives do not work and I can't boot from USB (no option in BIOS).... I've already deleted personal files from the computer to the recycle bin and used Eraser to securely delete it. I want to completely delete everything (like a complete reformat) ---- within the OS or by other means.... how can I do this?
View 9 Replies
View Related
Jun 24, 2012
I have a HP mini , which comes with windows 7 starter preinstalled .so, i which has 2 disk drives c,d and the HP recovery .in disk management i marked (HP recovery) "mark partition as active " , pressed ok on the warnings .the problem is that my laptop doesn't boot and gets to the HP recovery manager and when i cancel it to boot normally a message says "the installed program cannot start.press OK to turn off the computer".
View 6 Replies
View Related
