Computers Don't Work After Changing CPU And Video Card
Jan 4, 2013
I have a computer that did work so I change the CPU and video card and now it don't work. The CPU is compatible with the motherboard, I check and the Video card works on another computer so does everything else. So everything works and has been tested except the new AMD 965 CPU. I can't get any video so can a bad CPU not even give you video and how likely it to get a bad CPU?
View 9 Replies
ADVERTISEMENT
Mar 2, 2012
I have built them formatted them, fixed them added components many many times...This is my issue, Internet explore won't open....well it opens and I get a ap crash notification. I take out both of my different videos cards and use internal video and it does not crash. The problem is this is my living room movie file player and the video cards make a huge difference....I also need explorer as well....now Chrome works but that is not what I want..
View 4 Replies
View Related
Apr 22, 2011
I have a video card that I want to install in my computer running Win 7 Professional. The card is only supported with xp drivers. Win 7 Professional has XP MODE where users can operate in an Xp environment. Can I use my video card in XP mode? Even if it is not the primary video card perhaps?
View 1 Replies
View Related
Feb 22, 2010
My video card is an Intel (r)856 graphics chip. There is no driver on the Intel website for windows 7. Is there any way to get this card to work. the highest resolution i can get on Win 7 is 1024 x 768. My system is as follows.
[code]...
View 9 Replies
View Related
Jun 14, 2011
I have a Dell XPS Studio with 9 gig of ram & a 1TB hard drive the video card is Nvidia GeForce GTS 240. Is ths a good combination for use with Photoshp CS5 Extended?
View 7 Replies
View Related
Dec 13, 2012
I just purchased a new video card for my old Acer M3100 that I dual boot the original Vista and Windows 7 on. I bought a new Asus Nvidia GeForce GT 610 video card to play Skyrim. Windows 7 will install the drivers with absolutely no error messages but upon rebooting they won't load and I'm stuck with basic VGA. I booted out and back to Vista and loaded them and they installed fine as well and upon rebooting into Vista they actually load! My Windows 7 install is a recent clean install because I tried upgrading to Windows 8 and didn't do a clean install and it borked itself on all my legacy hardware. Does anyone know why a clean install won't load new video card drivers but my old Vista install loads them fine? (Yet another reason not to abandon the Vista Beast, Vista is the last OS that recognizes my (2) Rio Karma MP3 Players.)I downloaded the latest drivers for Windows 7 Pro 64Bit directly from Nvidias website and installed them and still get a "No GPU detected" message when trying to run the NVidia software that comes with the drivers.
NVidia Driver Version: 306.97
View 7 Replies
View Related
Feb 23, 2011
Is there a driver for GeForce 5600 that is compatible with Windows 7?
View 7 Replies
View Related
Apr 27, 2012
I have two pc's. Both run windows 7 Home premium 64 bit.
PC 1:
Cyberpower
i5 quad-core processor (3.60ghz)
8 gig ram
AMD 6670 HD graphics
PC2:
Dell XPS 8300
i7 quad core (3.4ghz)
AMD 6870 Hd Graphics
16 gig ram
I want to sync them both (at the motherboard/cpu level) to make them work together, is there any way to do achieve this, with these machines? (And im not referring to just file sync, i mean having the clock, cpu, motherboard, memory, on both computers working together as if it were one machine.)
View 6 Replies
View Related
May 11, 2012
Is there existing external graphic card or video card for integrated laptops?
View 9 Replies
View Related
Jan 22, 2012
I need the drivers for card of video capture of GADMEI PT228 TV TUNER CARD, for Windows 7 32 bit.
View 1 Replies
View Related
Nov 7, 2012
I purchased diablo 3 for my husband & my video card is not supported so he's unable to play, my computer is a HP P624 f-b desktop with a Intel GMA intregrated graphics, I am aware I need to up my power supply also, I have no idea what video card can be used to upgrade so the game is playable, not looking to spend a fortune?
View 5 Replies
View Related
Nov 1, 2009
I cannot get Windows 7 Upgrade Advisor to work on two computers running Vista Home Premium (32 bit) one a laptop and one a desktop. It ran fine on my old PC running XP pro. What could it be?
View 2 Replies
View Related
Oct 25, 2012
PI have to use onboard sound card to have audio through HDMI output from video card. The external sound card installed is Xonar DG and it comes with SPDIF output header to be interfaced with video card. But I do not see no such header on the video card. I wonder what video card has such an interface header.
View 3 Replies
View Related
Dec 23, 2011
I have recently purchased Samsung RF511 notebook and I have been trying to run HD video files(mkv) and they do run but it is very laggy and stuttering occurs very often. So I looked a bit into this matter and what I have found is that the VLC player that I am using to play the video files runs of the onboard graphics card and not the nvidia 540M card that is also installed in this notebook.
View 5 Replies
View Related
Jan 31, 2012
I am running Windows 7 on six computers. I can see all of the six and they can see mine. I have finally figured out through some internet research, how to get their computers to access mine. However, when I go from my computer to theirs, I get asked to enter a network password. All of the password protection is off. It's saying something I'm not understanding underneath the user name and password request boxes. It says Domain: and has my PC name on it. How can I get the access to go on their PC's?
View 5 Replies
View Related
Mar 17, 2012
i have 2 windows 7 computers that dont recignize that i plugged in a mouse. i know the usb port works because i use thumbdrives and other usb devices and it recignizes them onecomputer is an alianware m11x laptop the other is a custom biult desktop computer i know the mice works because they work in my husbands laptop but neither of my computers plzzzzzz ive tried like 5 differnt mice and none work
View 4 Replies
View Related
Oct 1, 2011
i have recently created my own windows 7 copy using this tutorial how to create windows 7 bootable dvd or iso by britec - Internet which worked greati then used the disk to format and re install windows 7 on my laptop, which worked fine.
View 6 Replies
View Related
Sep 12, 2011
I am looking for a video editing software that allows changing orientation of video display by 90 degrees.
View 3 Replies
View Related
Jun 14, 2012
I recently installed "everything", a tools for fast search, and have set it to start on startup.Every time I start my laptop, It asks me whether I want to start it and "allow and unknown program from the following publisher to make changes to the computer". I have set my User Account Control(UAC) to "always notify" and I don't want to change that.Is there any way I can let "everything" work without my my permission or Changing UAC to anywhere below "always notify"
View 4 Replies
View Related
Apr 20, 2011
picking a capture card to record computers (i would like to record a game called Minecraft and i dont know what kind of capture card to use). Also i have a Gateway laptop?
View 1 Replies
View Related
Jan 6, 2012
I started with Windows 7 Home Pr. last week, after using XP for about 6 years. I bought the new PC without a new graphic card and wanted to use my NVIDIA GeForce 8800 GTS until I have enough money to buy a new one. I use the PC only for the MS Flight Simulater X with 3 Monitors and the Matrox TripleHead2Go (Analog). The Screen is expanded over the 3 Monitors.First of all I mentioned, that there is no Driver from Matrox for Win7 matching with the TH2G, I got bad results in resolution and frames and so I tried different old Drivers from matrox and from NVIDIA (f.e. I tried Vista64-Driver).
No chance for better graphics, so I decided to buy a new card, the NVIDIA GTX460 2048MB. It works excellent with good resolution and frames, but now my problem starts.I have only installed the right driver from NVIDIA, no other one, but I didn't de-install any other.Now, when I fire up my PC, every day there is this damned Mini-Dump. Till now, only during starting, today first time during flying.After reboot the PC runs normal.I suppose it depends on my horrible trying with drivers, but I'm not sure how to delete or change which part.Hope you can see anything in the file, if there are more necessary questions,
View 3 Replies
View Related
Jun 12, 2010
if there was any way to change my onboard graphics card in my laptop? My laptop is a Acer Aspire 5520, with the default Nvidia Geforce 7000m.I'm usually alright with it, but I'm trying to start playing serious games (Arkham Asylum ), and I get this error "1x32 fb render target issue".
View 9 Replies
View Related
May 17, 2012
I have a Dell n5110 i5(intel HD 3000 graphics),that I bought last year to assist me with my studies. I didn't care much about the graphics when I purchased it.I'm not a hardcore gamer, but I read that I should have bought a laptop with a better card graphics if I was to play the latest games.Of all the games I would have liked to play GTA 4. I know its not possible with what I have. I intend to have it with me for a longtime even if I don't get to play the latest games(I can play older ones like Hitman blood money).I'm curious, since I haven't found the answer elsewhere, whether it is possible to have a gaming card graphics added one day for the model of laptop I have.
View 1 Replies
View Related
Aug 7, 2012
my scree won't work since i changed some settings in a program called catalyst control center
View 1 Replies
View Related
Jan 13, 2010
I have new Sony CW laptop running Windows 7 (64-bit) with an Nvidia GeForce GT 230m graphics card.The tiny problem I have is that I can't adjust the video settings (colour/contrast/brightness etc.) in Windows Media Player 12 as I am used to being able to do in previous versions. I use this function all the time and it is not enough for me to simply change the global settings as I know it should be possible within Windows Media Player.I updated the Nvidia driver and downloaded the K-Lite codec pack (too complicated - didn't know which codecs to adjust) with no result. The Nvidia control panel settings are all set to 'use the video player's adjustment controls' and I have had no luck adjusting any of the options.I have read online about video overlay, but I cannot find any options for this in the Nvidia control panel, and I don't even know if that is the problem. I also looked at the Display options in the Control Panel but nothing worked.
I discovered that the Brightness/Contrast controls do work in Quicktime and KMPlayer, but I've still had no luck achieving the same with Windows Media Player 12. I downloaded the Windows 7 Codec Pack to no effect. Here is a list of the codecs installed according to the technical info on Windows Media Player:
Microsoft RLE
Microsoft Video 1
Microsoft YUV
Intel IYUV codecIYUV
Toshiba YUV Codec
Cinepak Codec by Radius
Xvid MPEG-4 Codec
[code].....
View 1 Replies
View Related
Nov 5, 2009
Before Windows 7 came out, I read a few articles like this one:
AMD, Nvidia Expect Windows 7 to Improve Visual Experience, Boost GPU Performance - X-bit labs
Does anyone know how this works? Do we need to install something special? How can we tell it's working? Does it offer any real world benefit?
View 7 Replies
View Related
Aug 28, 2012
i have a question. i am running a quad screen set-up. i have been running windows 7 32-bit. with 2 video cards1 pci-e ati radeon hd 4350 now it was working great in windows 7 32-bit, but ever since i upgraded to windows 7-64 bit. its not working at 100%now i have been reading alot on this forum that alot of people have trouble getting the fx 5200 working. after trying many different drivers i finally was able to get it working. the only catch is that. i had to turn off aero and disable other aero features so it can run with better performance.but even after doing that. the ony problem i have is that videos such as in Internet. run slow seem to lag a little and worse when i put it on full screen.i figure its the card because its so old and its a pci card
View 5 Replies
View Related
Dec 31, 2012
So far i have a GT 520 TI and i am looking at this video card (Newegg.com - GIGABYTE GV-N650OC-1GI GeForce GTX 650 1GB 128-bit GDDR5 PCI Express 3.0 x16 HDCP Ready Video Card) i saw some gameplay's of it and so far it look's and play's very good, but it say's it need's PCI Express 3.0 x16 and my motherboard that's a Gigabyte GA-M68MT-S2P, It say's PCI Express x16, I really don't know what version of PCI Express my motherboard is, my question is, Will my motherboard work with the GTX 650 and does PCI Express 3.0 mean that i need to update my motherboard?
View 9 Replies
View Related
Jul 25, 2012
Recently ran a bunch of malware / antivirus programs to get rid of a zeroaccess trojan. (malwarebytes, mcafee, cccleanter, eset, hitman). Was finally able to get rid of the viruses in the services.exe and desktop.ini files. However once they were cleaned and got everything back to normal, I'm having problems with my video card being recognized by anything. Only recognizing the Intel® and not my Nvidia gtx 560M. It's not listed on the dxdiag page, not showing up as a selectable option for The Elder Scrolls Skyrim. Was working fine a few hours ago. It's listed under device manager just not showing up anywhere else. Just wondering if getting rid of those viruses might have deleted some needed .dll or something
View 6 Replies
View Related
Feb 4, 2012
I have a gateway sx2840-01. I need a little more graphics power.It is a slimline low profile set up. I have found a number of cards that would take care of my graphics needs but all seem to require a much larger power supply. Really having a tough time getting advice on upgrading the power.How important is it to have more power?I have 200w; most upgrade video cards require 350w- 600w. Can I get away with what I have? If not, what are the options?
View 1 Replies
View Related
Mar 23, 2011
-HP Pavilion p6750z Desktop PC-AMD Athlon(TM) II 250 dual-core processor-6 GB RAM-512MB DDR3 AMD Radeon HD 6450 (PCIE)-Windows 7 Home Premium 64 bitSo, two weeks ago I bought a desktop PC from HP. I wiped the drive to get all their vapor ware off, installed my software and everything went fine. Windows Update recognized the hardware on my machine and downloaded and installed the appropriate drivers after the wipe.Here's the problem. My girlfriend followed suit two weeks later and asked me to do the same thing for her. Our machines were slightly different but for the most part I expected a similar experience. Except it wasn't. This time Windows Update failed to recognize the Video Card after the wipe.So now she has this nice video card sitting in her machine using a Standard VGA Adapter instead of the Radeon drivers it needs. No matter how many times I download and install the Catalyst software from ATI's site it doesn't catch. What am I doing wrong?
View 9 Replies
View Related