I had one of my regular BSOD (I'm quite sure its a RAM issue) and nothing unusual ever really comes from it, however today it screwed up my USB controller driver and now I'm perplexed as to how to get a fix for it.
(Windows 7 64-bit)
Windows recognises all of my 8 Universal Serial Bus (USB) Controller devices in Device Manager and upon startup it attempts to install the drivers, but fails on each one of them every time. I've tried to manually update the driver and I get the message:
"Windows found driver software for your device but encountered an error while attempting to install it.
Intel(R) ICH9 Family USB Universal Host Controller - 2935
The system cannot find the file specified."
The file associated with each of these devices is C:WindowsSystem32driversusbuhci.sys
I've tried countless chkdsk C: /f in CMD to no avail and my Windows 7 disc did nothing to automatically find a cure (wasn't sure how to find the driver manually from disc). I've been told that the drivers for USB controllers are downloaded through Windows Update however I have extremely limited internet bandwidth and simply cannot be downloading 300mb of updates (I searched and couldn't find anything vaguely matching the description of the driver I'm after).
This is driving me a little mad and I really don't want to resort to reinstalling Windows. I've tried Aida32 to try and find out my motherboard type and it shows as unknown.
I've just been downloading various Chipset drivers and browsing through the MANY options that windows provides me with when searching for drivers on my computer, however, whenever I try and automatically OR manually install a driver, even when I'm SELECTING THE FILE for the driver, it STILL comes up with that ridiculous message of "Windows found the driver software ... ... The system cannot find the file specified."
I've just bought parts and collected a new PC system. My Motherboard is AsRock M3A785GXH/128 ASRock > Products > M3A785GXH/128M
and regarding to the manufacturer it should be Windows 7 hardware ready.
But I can't install Windows 7 pro 64 bit on my new system. The Windows 7 installation application can't see my harddrives and want a driver to them. I assume that should be a driver for the SATA controller on the motherboard. I've tryed to use the drivers on the motherboard cd-rom and tryed to use the drivers froms asrock homepage, but Windows 7 wont accept them.
I have contacted AsRock about this issue, but I'm wating for an answer and hoped that you guys might has seen this problem before, and will answer quicker than AsRock Support
I should say that I cant install Windows Vista Business 64bit without any problems at all.
my laptop is hp pavilion g6 notebook pc >> my problem is with the ethernet controller driver and the network contoller driver >> after i had install a windows 64 bit i couldn't find these drivers.
The mobo's kinda old, and not the greatest; the builtin SATA only works for Raid, so I put in a PCI sata card with the SIL3114 chipset. The computer now sees the 64GB SSD Patriot HD I'm trying to use for her C drive (The SSD is a leftover from a different project... I thought it'd lend some additional performance to help make up for the 1.2 ghz cpu). When I get into Windows setup, though, Windows 7 does not recognize the drive, and none of the drivers that came with the PCI card seem to work. I suppose I should have double checked before buying the SATA PCI card to find one that has native Windows 7 drivers, but I thought the stone age days of needing SATA drivers were over, guess I was wrong!
A few days ago I did a clean install of Windows 7. Now I have a problem. The computer is a wireless 'client'. It has a Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC (NDIS 6.20).
When I bring up Device Manager and expand 'Network adapters' I see "Realtek PCIe GBE Family Controller".
When I expand 'Other devices' I see "! Network Controller" (Note the exclamation point.) Double click on that and I see "The driver for this device is not installed. (Code 28). When I click on Update driver I get a message Can't find a driver. I have tried many times with different source folders and files and nowhere is a driver found.
I have gone to MSIs driver web page and downloaded the Realtek PCI-E Ethernet Driver for Windows 7 32/64 bit "realtek_pcielan_7_nb.zip", extracted the files and still no joy. (M/B is MSI G41M with Intel E7400)
There is a wireless icon in the tray. I click 'Open network and sharing center". No matter what I choose Windows 7 ends up telling me to plug in an Ethernet cable. No, this is a client not the server. I have verified that the NIC can connect to the computer with the Ethernet cable by using the old XP hard disk.
OK, I had the issue that several people have had with windows hanging at the "Starting Windows" Screen. I discovered that disabling the USB 2.0 Controller in BIOS allowed me to finish the install, and boot into windows normally. I re-enabled the controller and booting into windows hangs at the same place as before...turning it back off fixed it again.
My problem is that my only disk drive is a USB external drive, and I will probably be doing some file transfers using USB...I need the speed. Installing windows took a LONG time at USB 1.1.
Flashing to new BIOS and running windows update will be tried today to see if that will solve the issue but I wanted to post to see if anyone had some ideas that I hadn't thought of.
i have installed windows 7 ultimate on my desktop but the drivers for multimedia audio controller dint install, ave tried all sorts of universal drivers but none has given me sound.
My laptop is from Toshiba, model L650 PSK1JA OK3017. Here's Toshiba's driver page for my device: Support :: Toshiba ::Computers, Laptops/Notebooks, Tablets, Televisions, DVD and Blu-Ray Players, Camcorders, Storage, Accessories, and moreI recently purchased a blank hard drive along with a copy of Windows 7 Ultimate 64 bit. I've installed all drivers listed on the page for a 64 bit system but when I try to install the "Intel Wireless LAN Driver (For Intel Model Only)" driver or Proset driver, the driver extraction begins, ends, but when the setup is meant to run, nothing happens. I've redownloaded it and attempted to install it twice to no avail.Basically, I cannot connect to the internet and Windows cannot detect my network adapterI can't call Toshiba support because their operating hours are when I'm at school.casionally, when I try running the driver I mentioned before and the extraction is complete, when I select "No" as to whether I want to run the file, Windows gives me the error: "Archive Extractor -- Error occured in system module [-135]".
I did a windows 7 clean install on my HP Mini 210 4051 nr as part of creating a dual boot with Ubuntu. In Linux the internet works fine, but in Windows 7 it does not. In the device manager I see yellow flags over the ethernet and network controllers. Code 28 (My model does have an ethernet port).
Because the machine cannot connect, I downloaded all the related drivers (everything from the network tab) from the HP website for my model with another computer and then put them all in a folder on the Mini's desktop via USB. When I try to install the drivers through the device manager, and direct it to that folder, it says it finds nothing usable.
i installed a sata controller because the sata controller on the motherboard went out. I can easily install ubuntu but when i try installing win 7 it asks for a cdrom driver, when i try booting from usb it asks for hdd driver.
I have a Gateway P-7811fx laptop. I did a fresh install of Windows 7 (64 bit) and now I can't seem to get my SD Card reader to work. I know that the laptop knows there's a SD card in there because when I plug it in, it pops up as "O2Micro SD Disk Device" under Disk Drives in Device Manager. But for some reason, it won't show the SD card in My Computer.
The only problem I can see is that under Storage Controllers in the Device Manager, there's a yellow exclamation point next to "AILXT4UC IDE Controller" that I cannot seem to fix.
All of my drivers seem to be updated and I cannot get any answers from Troubleshooting the problem. Anyone know what I'm experiencing and how to fix it?
