Can't Use Save As In 32bit Applications On Windows 7 Pro 64bit
Mar 10, 2011
I've recently found that I'm unable to use the "save as" function on any 32bit applications as attempting to do so causes the system to hang as it loads the explorer browser to allow me to pick a save location. I initially discovered the problem about a week ago and originally thought the problem was just limited to Internet Explorer and Firefox, but after poking around my system a bit more, it looks like its affecting everything except 64bit Internet Explorer 8 which can save without any problems.
Ok hope someone can figure out what is going on with my system, I have a very odd issue when i first boot my system I am unable to open any 32bit applications when observing task manager the process opens and closes imediatly with no error.If i warm reboot the machine and log back they start to work.
I'm heavily using Visual Studio 2010 (development environment for develop applications) all the day. To speed up my computer a little bit, I have added into my computer 8 gigabyte of RAM. My processor is a standard quad core. So my computer should be powerful enough to handle my requirements. Unfortunately, this isn't so. From time to time Visual Studio hangs, although my hardware should be good enough.
A possible reason for this could be the limitation for 32 bit applications. Visual Studio 2010 does not support out of the box a 64 bit compilation, so it is basically a 32 bit application. Is it possible to patch a 32 bit application (in my case VS 2010) to gain the same results as for a 64 bit compiled application?
I tried installing a 64 bit Windows 7 on 32 bit processor(Dual Core, 2.80HGHz) having a DDR RAM of 2.5GB. But I could not do so due to 'Hardware Incompatibility'.I then tried to install a 32 bit-Windows7 Home premium, but again the same 'Hardware Incompatibility' appears on screen and prevents the installation.
Testing a windows 7 setup and have problems with the default save as/ open location not defaulting to the users home area. It goes to the desktop insteadI have done thefollowinn group policy go to User Configuration AdministrativeTemplatesWindowsComponentsWindows ExplorerCommon Open File DialogClck ontems displayed in Places Bardd your Save Location. for example \myserverusers est\%USERNAME%i have put the setting in number 1 and i does not work, i have put it in all 5 and still does not work, i have tried just
I had bought my Acer notebook a while back, which had 3Gb, but seemed insufficient for my work. Hence, I upgraded it with two new RAM Modules of Transcend make (2 X 4Gb) recently. However, I haven't found any noticeable performance improvement post this huge upgrade. Also, when I check the Virtual Memory settings, it shows that "Currently Allocated - 8054 Mb" and "Recommended - 12081 Mb". The check box on "Automatically allow windows to manage paging file size" is checked by default. Every time I go to this screen, and even though I don't change anything, it prompts me to save the setting and restart windows.
I'm changing operating systems to take advantage of the 8g of ram resident on my new machine. Currently it's running XP in 32 bit mode. What kind of problems can and will I encounter by doing this and what is the best approach to be successful here.
I will be getting windows 7, and MS office for both computers. Mom will get basic office, I will one more advanced, the one with MS publisher. I was reading MS office site, that said get MS office 32 bit, because a lot of the extras do not work in 64 bit version.
can I run Windows 7 64bit on my computer, then add MS office 32 bit and run the 32 bit software from Windows 7 64? Or does both Windows 7 ( the OS) and MS office (the program) both need to be the same bit version?
i have the 64 bit win 7 installed in an alienware m17x r2 laptop. i have 4 gb mem installed. for some reason, windows is only registering 2.9gb installed. i have ran my mem diagnostics from the bios screen and both mem sticks come up as good. is there a reason i dont have access to my total ram?
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, 64 bit Processor: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz, Intel64 Family 6 Model 30 Stepping 5 Processor Count: 8 RAM: 2932 Mb Graphics Card: ATI Mobility Radeon HD 4870, 1024 Mb Hard Drives: C: Total - 223434 MB, Free - 67556 MB; Motherboard: Alienware, Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled
Currently, I have Windows 7 32 bit installed on my Dell Studio 15 laptop. I originally had Windows Vista, but upgraded to Windows 7 Professional 32 bit for free during an event on my college campus. My laptop is however, 64 bit capable, so I'd like to upgrade to 64 bit. I realize this entails a clean install and I'm ok with that, however I have no idea of how to do that! I don't have any upgrade discs because the upgrade was done for me at the event. I have located my product key by downloading an application online that found it for me. Now, is there a (relatively) pain-free way for me to install Windows 7 64 bit on my capable computer, even though its 32 bit right now and I lack installation discs?
How do i change from windows 7 32bit to 64bit?Do I have to reinstall, i have no windows 7 disc it came already on my computer.If i do have to reinstall how do i do it and what about my norton and other programs etc how to i save them?
This is just a personal opinion and others may very well disagree. But I think Windows 7 64-bit is better than 32-bit simply because of the ability to make better use of installed memory. A 32-bit machine is limited to 4GB minus whatever memory might be set aside for graphics, etc. Most folks see about 3-3.5GB of usable RAM on a 32-bit machine. If your machine is upgradeable (or came with) more than 4GB RAM then 64-bit is the way to go.Memory - Set Maximum Amount Used by Windows 7..As far as using older legacy XP programs you could try running them in compatibility mode. Compatibility Mode.
I know that one copy of windows 7 can only activate one computer. I have two, one already with windows 7 32bit installed and one without windows 7. I plan on buying a new one, installing windows 7 on my second computer and upgrading windows 7 to 64bit on the other. If I upgrade, will windows use the old activation key or require me to enter a new one, because that computer came with windows 7 32bit so I don't have the disc.
I have purchased a new laptop with Windows 7 64bit pre-install. It is replacing my old XP Pro 32bit laptop. What do I need to do to transfer files and programs from the older XP Pro 32 bit laptop to the new Win-win 64 bit laptop?
I have Windows 7 32bit with an upgrade disc (so it only has the 32bit on it) and I would like to put 64bit on. I don't care about my data or programs (they are backed up) but I am wondering where I could get iso images and whether my product key will work.
I had Vista on my PC and upgraded to Windows 7 32bit via the Retail Upgrade version of Windows 7 Home Premium (which contains both 32bit &64bit upgrade discs).I want to now do a clean install to Windows 7 64bit, can I use the 64bit upgrade disc supplied with the Retail version I already have or do I have to purchase a full version of Windows 7 64bit?
I have a laptop that is perfectly compatible with 64-bit (I've verified it and I am very sure). I have installed a 32 bit version of windows 7. Now how to upgrade to 64-bit...? Remember, my installation dvd has no installation files for 64-bit.
I am new to this forum and looking for some opinions. I recently built a new desktop and installed Win 7 64bit and it was a walk in the park. So now I am going to upgrade the wife's laptop. It is a HP Pavilion zv6270us. It has a Athlon 64 3500+ at 2.0GHz with 2GB DDR PC2700 Cl 2.5 333mhz memory. I dual booted Win 7 RC 64bit to test and had a few driver problems since HP won't support this unit for Win 7.
I was able to use some Vista drivers with a hack to get the sound working. Only thing not working is the Fax Modem which I never use. We use the laptop for E-Mail, Web browsing and wife is addicted to "Bejeweled 2" which runs fine under Win 7 64.
I was thinking of installing Win 7 32bit and wondering if 64bit was worth the effort as far as bootup time and performance. I was thinking 32bit might have better drivers and might even perform better.
I want to upgrade my windows 7 32 bit installation to 64bit so I can add some extra ram to my system, but I was wondering if I do a backup on my 32bit install, format the drive, and then install 64 bit windows 7 and recover from the backup will it work? Can you use a 32 bit backup on a 64 bit machine?
I just had a new laptop with Windows 7 (64bit) installed, most of my software that i was running on my old windows 7 (32bit) was managed, and now they are running very well on my new machine, but only one software (QQ Messenger), I've been using this messenger for like 3 years, n i canot imagine stop using it jst cuz of this (32-64)
I recently purchased a Mac Mini but wanted to utilize Windows (specifically windows version of Microsoft Office) so I had my girlfriend pick up a Windows 7 DVD from school. My Mac Mini has 8 GB of RAM but she picked up a Windows 7 Ultimate 32-bit DVD. I have already installed the OS and I have found out that only 2.16 GB of the 8 GB RAM is usable. If I were to reformat my partition and install a 64-bit Windows 7 Ultimate over my current 32-bit Ultimate would I be able to utilize the same 32-bit product key? I am concerned either the 32-bit key is connected with a 32-bit version or Microsoft will not let me validate the 64-bit addition because they will think I am trying to use the product key on two different systems.
I have windows 7 ulitmate 64bit and I need to run a 32bit program for a short while. I thought that windows 7 would allow a 32bit program to run, but I can't seem to get it to work.