CANT Enable Wireless Connection On Notebook?
Oct 11, 2011CANT enable wireless connection on my notebook
View 1 RepliesCANT enable wireless connection on my notebook
View 1 Repliesi lost the wireless connection between my zyxel router and my msi cr500 laptop,and cant reconnect wirelesly,error report says wireless functions turned off,how do i turn it back on again
View 1 Replies View RelatedSince a few days the left touchpad button on my Samsung notebook does not work any more.Double tipping on the touchpad itself (as replacement action) or using the left mouse button works fine.So what error can it be?How can I find out the reason?No mechanical damage is observable.
View 2 Replies View RelatedI have no clue what is happening to computer. system restore, help and support, firewall when i click on anything to try to fix or restore just says ....service is stopped and would i like to start. I push yes and nothing. Went to system configuration and most services have stopped running. im using another computer so i can read what to do and fixx other one. no internet on one im trying to fix. ready to just shut it off and throw whole thing away.
View 3 Replies View RelatedInternet connection over an electrical Powerline instead of a wireless connection?is it easy to setup, reliable, fast,..?More in particular a D-Link device:DHP-307AV PowerLine Homeplug AV Kit
View 6 Replies View Relatedmy 2007 acer aspire was taking a long time to open aurora i did a system restore with uniblue powersuite what i ended up with was no internet at all but internet sais its connected network sharing center indicates everything is running fine but my internet speed is 0 no internet connection local repair depot recommended a new windows install it could be a virus can i try a new driver can i download a driver on to a usb drive does anyone know a link treid but i found exe only need a driver in an envelope that i can store on usb need a download link would this be called a internet driver?
View 1 Replies View RelatedFor security reasons, I want to turn my Internet connection via my Netgear router on and off, as I like.In Windows XP it was eay. I could pull out a LAN icon from the Network connection section in the Control Panel to the desktop.Then all I needed was to click it and choose to disable/enable the Internet connection.I could also disable it from the tray icon and enable it from the LAN icon.In Windows 7 I don't find such a possibility. It is in the Internet all the time, or if I disable it, it is complicated to enable it again...
View 6 Replies View RelatedWhen I changed to Windows 7 and connected to the internet, every now and then, it asked whether I wanted to stay connected. I disabled this message, but now I would like to get it back.
View 6 Replies View Relatedhow do I turn on the wireless for the internet can't id button msi u135 laptopQuote :
View 2 Replies View Relatedhow to enable DHCP in windows 7 local area connection
View 1 Replies View RelatedHow do i make my laptop/notebook a wireless with usb modem?
View 2 Replies View RelatedWhen I log off or turn off my pc and then log on or turn the pc on, internet is not working. I need to open Network and Sharing Center, go to my Local Area Connection, disable then enable it and then all works. How to fix?
View 7 Replies View RelatedA few hours ago I returned to my Dell laptop #1 to find that it had no wireless connectivity. It had wireless connectivity a couple hours earlier, as I was using it .there is nothing wrong with my modem /router, as I am sending this on Dell #2 which is connected wirelessly.I have had a new Windows 7 o/s installed in the past ten days or so. how to 'enable my wireless system'?
View 8 Replies View RelatedI have integrated LAN in my PC which I dont use so I disabled it in BIOS.
Than I installed the driver for my Belkin F5D7050.
I go into the Adapter Settings and than it comes up with my adapter disabled so I click on Enable and than the box pops up and says Enabling than Enabled but still its Disabled as its gray. Sometimes the box freezes when Enabling. And yes I have clicked Refresh after I tried to enable.
Anyone got clues, there was no problems when I was connecting with Vista.
I have a new Netgear WNDA4100 (wireless USB) and the install program can not find the WNDA4100, However, Windows 7 finds it and installs it. I can not get the Netgear Install process to complete. Cancelling that results in a disabled network device that will not enable. AKAMAI was installed on my machine and after removing that magically the item "manage wireless networks" re appeared on the Network and Sharing Center Page - AKAMAI installed precluded that from being there! However, clicking it does nothing - brings up an empty panel and when one hits "add", you get a network error. I did edit the registry manually and removed anything and everything to do with AKAMAI and it was all over the place. Doing that takes a little time. There must be some AKAMAI driver or something in the way of this all working.
Configuration:
Windows 7 x64 bit
ASUS P9X79 Pro 32 Gig 4 TB I gig ATI Video Card.
normally I would not bother you with such a silly question but I just can´t solve the issue.
I run Windows 7 ultimate 64bit on a brand new customized machine. Not an upgrade but a clean Installation
The problem I have is the following:
I upgraded to wireless with D-Link DWA552. I have a Linksys router WRT54G.
Installation and driver upgrade went fine. PCI card is correct in device manager en enabled.
The issue I have is that I cannot enable the wireless adapter.
Ok next step: got another card. Linksys, the a Belkin, the a noname.
Always the same issue. Microsoft compatibility center says YES to 64 bit. Installation is easy as it should be but the wireless adapter stays disabled whatever I do.
I also restartet WLAN Service, I disabled/enabled the hardware.
I appreciate every Info/Tip.
btw I did countless wireless installation.
Am I missing something?
I am trying to enable my wireless security, how do i do this?
View 1 Replies View RelatedYou have already checked all your settings and have done everything right. Your hard wired network connections work fine. When you go to wireless all your homegroup and network locations or most of them vanish with no resolution.Quick Solution: Make sure the time your router is keeping is the same as your network computers, including turning on Daylight Savings if applicable.Explanation:There are several threads on the internet about Windows 7 not finding workgroup or network printers or computers on wireless notebooks. This was after people painstakenly went through all the trouble shooters, turned off and restarted their firewalls and antivirus, rebooted and rebooted, reset and reset over and over again, checked all their settings and did everything right and still could not resolve their problem.
There is a likely resolution for this problem - at least it worked for me. It took me nearly a week to find this solution.Occasionally, when running the homegroup troubleshooter, I got the message that the time was not the same on all the network computers. I went around and checked all the computers and the time was the same - so why the message?However when I went to the router, I found that daylight savings was not turned on and the time the router was keeping was an hour different from everything else. Low and behold when I corrected the time on the router all the connection problems were resolved on the notebooks.
I Need wireless drivers for acer aspire one AOD250-1624-Black,compatible with windows 7 ultimate.
View 2 Replies View RelatedI'm running into a problem with an uncle's custom desktop where the wireless network is refusing to enable, even after enabling the connection.Here is a brief history;
1) Buy and install a Belkin wireless USB adapter. Wireless networks is enabled, but not picking up any SSID. Insure WLAN auto-config is enabled and no 3rd party wireless managers are installed.
2) My Uncle returns the Belkin and gets a Linksys by Cisco USB wireless adapter. Wireless network connection is disabled. Attempted to run the installation utility for the USB adapter, however it errors out stating the windows wireless manager isn't managing the wireless network. I went into services.msc, disabled WLAN auto-config, and re-enabled with the same issue. I thought something with Belkin may have hi-jacked the wireless management so I ran revo-uninstaller against the Belkin to remove the application and any related registry keys. Unfortunately the issue persists.
3) Even after telling him that it isn't an issue with with the USB adapters, he returned it for a NETGEAR PCI adapter. Again same issue, wireless networks show disabled, enabling the connection says it is successful, but the connection never enabled.
One thing I didn't mention is that the devices are seen in device manager, so its not an issue with the devices not being detected.I'm currently doing a System restore(taking a little while) to make sure there was nothing missed between the Belkin where Wireless network connection was enabled. I'll of course be updating with my results when it is done.I know this has to be something stupid that is causing it(When isn't it something stupid). The only thing that I can conclude at this time is either the 32 bit OS running on 64 bit capable equipment or something is really screwed with the OS; luckily my uncle is willing to format and reinstall if all else fails
On this laptop, we tried to connect to our router via this USB Network adapter. We went into 'Manage wireless networks' and disabled the Belkin Wireless adapter, to see what would happen if we re-enabled it. But after we disabled it, it dissapeared. We can't even set it up again. what do we do?
View 2 Replies View RelatedHave been trying to install a high gain USB wireless long range wireless network adapter to my laptop. Initially tried a Alfa AWUS036h, software installed ok, but it never detected any networks and in Network Connections it was showing disabled. Any attempt to enable started well, showed enabling but the icon stayed at disabled. I presumed it was a problem with the device so returned it on Amazon and purchased a RT73 USB Wireless LAN Card but it has the same issue. Tried the device on a XP laptop and installed and operated brilliantly. Both devices stated on the packaging that they were Windows 7 compatible. Have checked that I have the latest driver from the manufacturer.
View 3 Replies View Relatedsince i while ago my laptop's wireless been behaving really weird. the wireless driver will suddenly disable and gone from the network list going into Device manager, it says "this driver is not installed " or sth like that. cant exactly rmb what it said, and sometimes the wireless bars in the bottom will show a yellow "!" with no connectivity with showing only the network i connected to. if i repair it the driver will be gone. almost have to repair like 10X times to get it come back on, (or i think i came back on itself) or sometimes just no network "no connections are available" 1st thought was virus, but did full scan.no virus. just did a Full Format and reinstall window, and 1st thing i've installed the wireless driver..still happaning.
View 6 Replies View RelatedThe computer device manager shows that with the wireless network card is okay, and drivers and everything ok, but the network settings show that the wireless network card is disabled. Network card can not be enabled. I tried with several wireless network cards, nothing changes. The problem arose after the computer's motherboard replacement. Everything is working as before, except for a wireless network card.Where would be a problem in Windows
View 9 Replies View RelatedHow to automatic enable wireless lan adapter in windows 7
View 1 Replies View RelatedI have a 1 yr old dell vostro 3400 and for most of that year the wireless worked perfectly. Recently I have no wireless: I cannot set up or connect to anything, and nothing is visible. When I go to control panel etwork and internetmanage wireless networks, is says "Wireless is not currently enabled." I know about the little toggle on the laptop's exterior, and that is in the correct setting. I ran a hardware check from the BIOS and all relevant hardware is properly working. When I go to registry editor though, some of the files in SystemCurrentControlSetservicesWlansvsParameters have no values set to them (I didn't set them like that). how I can reenable wireless or is there a list of default working values for those files?
View 5 Replies View RelatedWhere is the switch on the front or side of the computer, or function keys if available, to enable wireless capability on the Dell Inspiron 1545 laptop?
View 1 Replies View RelatedI want to get the drivers that will enable me install wireless internet on my hp630 laptop.
View 1 Replies View RelatedJust got this desk top commputer(used)with Windows 7 Ultimate on it and upon installing my wireless adapter found that I am not connecting to the internet.After reading quite a few help programs and troubleshooters I have run services.msc tried to turn on WLAN autoconfig and got an error:1068.Also cmd promt: sc query wzcsvc and got:The specified service does not exist as an installed service. use a wireless connection with this computer.
View 11 Replies View RelatedOk so I just got a new computer and I ordered it with a wireless adapter card. The adapter was backordered so I used an ethernet cable until it arrived. I tested the connection speeds with testinternetspeed.org (legit or not idk. results were pretty consistent.) With just LAN i got 8Mbps download. With just the wireless i got 15Mbps. For the hell of it I tried it with both in. I got 45Mbps. With such a good connection I would love to keep it like that but my question is will this setup potentially harm my new PC?
View 2 Replies View RelatedI have dell laptop -wireless connection; windows 7 os; vostro; my kids used computer last night; i wake up this morning- cant connect to internet; i have tried everything; i must have done about 5 system restores using different dates - no luck; tried safe mode.
View 5 Replies View Related