C5180 Printer Not Printing After Moving From Windows XP To Windows 7
Jul 22, 2012
We had our HP c5180 printer installed on a windows XP machine. I recently moved it from there to our Windows 7 machine. Since moving it, i've tried everything i can think of to get the printer working (first on the network, then directly attached to the computer). Most recently: i can print a test page from the HP solution center software. Still can't print from any application. The printer status does briefing show the document showing up, then it goes away (like it printed successfully) but nothing prints.
I have: checked cables, reinstalled the drivers and walked through the the solution center and windows printer helps. Everything indicates the printer is in working status.
Ports: the printer is connected on USB001 (in the port window it shows LPT1 and USB1 as "virtualization").
The print preview shows the text in an email message and Word document, but my HP 1215 printer is only printing the hyperlinks. This problem arose after trying to print a Word document that I created, which had corrupted content within it.I have tried Microsoft printer fix without result. I have searched the printer properties but cannot find any property which might have caused this problem.
i have window 7 and install printer hp laserjet p1007 on same pc which is on lan network. The said printer was working properly till date but from today it does not print any document.
I would just like to say, I am not just posting this question anyhow. I have read around and I haven't found any solution to my problem, thus I have resorted in opening a new thread.So here is the prob:I have a Windows 7 Starter Edition netbook which is connected to a WRT54GL Wireless-G Router. This router is connected via hard wire to my Windows Vista Desktop and that is how the desktop has access to the internet. The netbook is accessing the internet the very same Router via Wi-Fi. The Printer (HP DeskJet 940c) is connected and installed on the Windows Vista Desktop and is functioning. It prints when I give it commands from the desktop. I have set the printer sharing options 'on' in the Networks and Sharing Center as well as haven't kept a sharing password (its open and unprotected). This is as far as I have gotten. My next challenge is, how can I print from the Windows 7 Starter Edition netbook on my HP Deskjet 940c via the Router.I would be very grateful if someone can explain to me in a very noob-ish way as I am not a techie. If someone could send me a video link or so.
I am running windows 7 Enterprise on my office laptops. They are connected to our lan via CAT 6 cables and a 100 Mb/s Switch. One of our central laptop has our printer connected via USB port. Printer model- Canon LBP 2900B LASER SHOT LBP2900B. Now the problem is, Whenever we send a print command via any of the networked machines, it takes Loooonnggg 2~3 minutes to start printing... The printing speed is normal once it starts, but "Commencement" lag is annoying. However, the printing starts instantaneously on the machine to which the printer is physically connected. The LAN is pretty healthy and gives consistent data speeds of 11~12 MB/s
I have already performed these steps on ALL machines: 1> Uninstall and re-install printer drivers 2> Update anti-Virus and Run total scans 3> Run defragment on HDDs 4> Ran a Scan disk for HDDs
I downloaded from the HP site the drivers for the HP 6480 printer for Window 7. However the printer does not print. When I try a test page, it comes through the printer, but no print is on the page. The window on the printer shows what looks like two ? Marks above the two icons that looks like tear drops. I can't get rid of the ?.
i have a Toshiba laptop running win 7 I'm on a network where the printer is plugged into a desktop running win XP via a USB cable. If I print using the network printer from the laptop i get blue and pink lines where black should be.I have not tried to print a picture so i don't know the results of that.
i am hoping some body can help we have a hp photosmart c5180 printer and ever since i have installed windows 7 all the pics are coming out darker than the picture .
i have tried the printer via network connected or via the usb port and it seems to make no difference
but if you print from my wifes vista computer they come out fine .
has any body come across this before and if so how can i sort it .
System is HP desktop running W7-64 bit. Printer is HP Photosmart 7350, old but working perfectly until 2 days ago. Driver is Deskjet 5550 (closest one for this printer).
I've reinstalled the driver, plugged and unplugged the printer, and tried to print from different programs. As soon as the print button is selected the error condition shows in the Devices & Printers section. This happens whether the printer is turned on or not.
All of a sudden my printer isn't "connected" to my laptop...it says "it's offline" I've NEVER worked "offline" and I need to print some important information out to FAX to my ins. co. asap
I using windows 7 pro 32bit, I install printer HpLaser 1020 on Usb and Tosiba Estudio 255 on Network. I using both Printer on Earliest, but this 3 day not printering on both Printer. I check the Printer driver in Printer setting it ok. And also check Printer spooler on services, he is not start so i can restart on the printer spooler, after 2 min i check it the spooler automatically going stop. I restall the Driver also can't install the Printer driver.
I have a desktop computer and a laptop at home. The desktop is connected via CAT5 to the modem. The laptop is connected to the same modem and the same network, but via a wireless signal. Both desktop and laptop are Windows 7 Home Premium x64. Both desktop and laptop belong to the same homegroup/workgroup. It is possible to see shared files between the computers no problem. File sharing is enabled on both computers and works normally.So far, so good. However, I am unable to print from my laptop in a very peculiar way. I'll simply say what goes on (rather than attempt to analyse) so you can judge for yourself:When I print from the desktop: Print job goes into print queue. I am able to see the document in the print queue, on both the desktop and laptop (i.e. Laptop detects the correct printer and sees there's a document queued). Document prints as expected, and disappears from queue.When I print from the laptop: Print job goes into print queue on laptop only - Only the laptop sees the document in the print queue, desktop does not see it at all. After some time (usually ~10 seconds per page) the document disappears from the queue, as if it was printed normally. However, the desktop never registers the document in the print queue, and most importantly the printer never prints.
- Is this a software issue with Office 2003 (what I use)? Not as far as I can tell, printing PDFs and from websites also don't work on the laptop. - Could it be that the printer you added to your laptop isn't recognised as being the same printer? I doubt this, because when I print a document on my desktop but check the print queue on my laptop, the document is present. - What kind printer do you have? HP Deskjet F2180. - Is your network preventing the two computers from connecting to each other? I don't think so, because file sharing is on for both, works normally on both machines, and I can see the desktop's print queue from the laptop.
I have an Epson 1290 connected to my Windows 7 Pro SP1 x64 PC, and it is shared with my Vista Home premium SP2 PC, the printer works fine when printing from my Windows 7 PC but when I try to print from my Vista PC, nothing prints and all the jobs are shown in the "Open Printer" Dialogue box.I have tried right clicking and selecting "Restart" on each entry but still nothing happens.The printer is the default printer for both PC's and shows up in the Control Panel/Printers box.
From time to time when I go to print something in Word 2003 it prints two pages per sheet. When I check "page setup" it's somehow automatically set itself to "2 pages per sheet" and I have to reset it to "normal".Is there some way I can stop this from happening.
I have two computers wired to a router, both windows 7 Home Premium 64Bit. I have an HP 7580 printer wired to the router. One computer prints just fine. The other will print when the printer is first added, then it will stop printing after awhile. Deleting the printer and re-adding it solves the problem for a short while.
Currently my partner using XP can print to my Epson Stylus Photo R265 printer. This printer is connected via http://192.168.1.2:631 and will print whenever she wishes to do so. I can be working with Ubuntu and this is not a problem. When I attempt to print from Windows 7 by adding the printer and using the same address I failed miserably to establish any connection.
Fortunately I dual boot seven and Ubuntu and access from her laptop can be made as it is automatically linked to my PC. This can be a bit of a problem if I am working with Ubuntu as so far printing can only be done between both seven OS. My preference would be to have printing available via my USB connected printer using both Ubuntu and Windows 7 as this will let us work in harmony.
I have a brand new Dell desktop that has Win 7 on it. I have an older laptop with Win 2000. I am able to get onto the Internet on my laptop but I can't figure out how to print to a printer attached to the Win 7 desktop.
When I map LPT1: as follows:Net USE LPT1: \computernameprinetrsharename /PERSISTENT:YESit maps and works once or twice and then LPT1 is unavailabe if NET USE is typed in the promptr window.
I've installed the printer software on my laptop and successfully tested the ability to print when connected via USB. I also added the computer as a wireless connection. When I try to print wirelessly, nothing happens. The document just sits in the queue.I do not currently have the printer hooked up to anything but power. Am I wrong in thinking I should be able to print without a computer attached to the printer? If not, how can I troubleshoot this? Printer is HP c3180 AIO and laptop is HP Pavilion DV6.
I click on Devices and Printers. I right-click my Printer, then click Printing Preferences (it's a network printer). I change the Original Size to A4, then click apply. When I try to print, the Original Size is wrong! When I go back to my printer's preferences, my change is not there anymore.
I have a Windows 7 x64 RC.7100 build installed and have configured my HP printer using Vista x64 drivers, it prints locally just fine. However I tried to setup printer sharing with my x32 Windows XP laptop and have an issue that is really a pain. Whenever I print from the XP machine I get the print job in the queue on the Win 7 machine, but it just says printing for an infinite amount of time. I have to either restart my Windows 7 machine or go into Services and Print Spooling and Restart Service for the print job to complete. I found a similar error/problem with Vista but all of the suggestions did not help. The only thing I can think of is that there is some driver incompatibility, but HP states on their website that they wont have "official drivers" for Windows 7 until Oct 22.
Ive got the "retail" version of Windows 7 pro running on my 2 computers here at work, one of which is a laptop that is also used on the mall's free wireless network. When we plug in via Ethernet and rejoin the home-group, it automatically picks the shared printer back up, but when we try to print it stalls, and we have to reboot the back office computer to get it printing.
Tried powering the laptop off and back on with the Ethernet attached, still same result.
As smart as you guys are here, I know someone will have the correct answer, cause I'm stumped.
Quicken 2000 won't print even though printer says it's printing; No job in the printer que either. Downloaded another printer driver but that did not do the trick. it shows there's a printer in that que but nothing printed.
I have a Canon printer which prints coloured dots in grayscale mode. I selected all the options which are related to this problem and nothing solved the problem....I found out that if i check the duplex option this problem occurs and if i don't select this option the coloured dots don't appear in grayscale mode. Can this problem came from the Windows driver or Windows print wizard...? I have the Canon driver installed and i have Windows 7
I tried to print a document with the XPS printer thing and it wouldn't save no matter where I tried to save it, it said that I don't have permission. I am an administrator (and the only account on here).
