I'm having problems with my laptop on which I have Windows 7 Home Premium. I boot into the system but, after the loading logo,a black screen appears with just the mouse pointer/cursor; I can move it.It stay like that for a little and then the notebook reboots itselfs with no error or BSOD (even if I "disable the rebook on crash" using F8 at boot).One day I found my PC freezed (after an Ubuntu hibernate) and I had to force the power off.Trying to boot grub gave me errors: so I thought of a partition/disk error. With GParted I had problem loading the partitions, so with other tools I deleted the Ubuntu partition.Now I have no partition problem, but Windows 7 continue to not load and reboot.
- So I tried the "Last known good configuration". Same result.
- Safe Mode do the same.
- I cannot load anything nor do CTRL+ALT+CANC to try to load explorer. It seems to stuck before Winlogon.
I'm having a problem with this laptop after changing out the ram. It's a Lenovo 3000n100, running Windows 7 32bit. ( I upgraded from Vista.)
It originally came with 1GB ram, I increased it to 2 GB. It shows in the bios as 2 and also in belarc.
After changing out the ram, about every other time I start it up, when it gets to the logon screen, the pointer is frozen. I can log in, and on the desktop it's also frozen, so I have to use the win key and arrows to restart then it starts up normally. Once in a while, when it get to the logon screen, it's just black and then I have to do a hard shut down.
I changed the ram sticks around, made sure they are seated properly and I still have this problem.
Before buying the ram, I ran the crucial advisor and bought [URL] Crucial 2GB Set(2x1GB) 200-Pin PC2 5300 667Mhz SODIMM DDR2 RAM: Electronics IRC, I didn't have this problem with the original ram 512x2. Not even sure if it's a ram problem or not, but I haven't been able to figure out what's going on.
I have also checked the intel drivers and they are up to date.
I recently had my laptop crash on me, I recently returned from Iraq and lost all of my recovery disks for vista, so I decided to upgrade to windows 7. I purchased an oem install, and got win7 installed and working, but it decided to stop working for me. When I try to start windows normally the computer reboots until I choose to do a startup repair, when I choose startup repair it "loads", I see the activity bar, and then it goes away and I end up with a black screen and pointer. I haven't really gotten anything installed that I can't reinstall, so I tried to reinstall win7 and end up with the same as if I try startup repair, I get nowhere.
Today i noticed that after my windows 7 logon screen i get a black screen with only my mouse pointer on it. i already tried restoring to a day before the problem but same thing happenswhat can i do to fix it? seems to me that the problem started after i installed hotspot-shield i guess it cameout with some driver installer but i dont know which onesi waited on the black screen and it seems to start windows after 10 mins which is way longer than usual and thats my problem its anoying. what else can i do? i already did the restoring point process. and start up restore, and memory disk checkup.
Recently my computer has not been loading windows 7 up intill the login screen. I get to see the little circle color things swirl around with the "Loading Windows" text, but were the login screen usually appears, I get a totally black screen with a movable mouse pointer. It is a brand new rig with 4g RAM (2g sticks) and I am running the 64 bit version but wounder if this is causing the problem.
Also when I try to do a system restore using the windows disc, I must first go into the settings (by pressing DEL on start up), then set my bay drive to boot first rather then my SATA to get the "Press any button to boot from disc... " prompt. Otherwise windows will ignore the disc. However when I load the disc and try to go into restore points, there are none to choose from.... I have no clue what to do and am willing to just install windows complelty again ext.
My laptop didn't reboot wen i restarted it.. so i decided to recover using the recovery disk.. But wen it reached the last cd, the recovery failed. So i decided to choose to delete all files.. after formatting, wen I reboot it appears, BOOTMGR missing. so I used windows 7 cd installer, planning to reinstall my OS.. i restarted, reboot on cd/dvd, then "windows loading" appears.. after that black screen with appears.. wmouse pointer appears.. Laptop: toshiba A665 OS: windows 7 home premium
[code] This info above is not for the PC in trouble.I have an ACER laptop and it all of a sudden went to a blue screen and then tried to reboot to a black screen with mouse pointer only. Tried my win 7 upgrade CD to see if I could repair and it only loads to the same end. No options are asked for.The blue screen has appeared a couple of times and states a unusable boot sector. I would like to run a checkdisk but cannot find one to put on a memory stick with a minimal operating system.I have tried all the reboot choices, F8, F2 and F12.I tried to use an old windows XP install CD and when I select install it says a HDD can not be found.
I tried a registry tweak to fix my home networking issues and came up with a major fail. Long story short, I changed the rpcedptmapper value and the system won't boot.I put the HDD in a cradle and it won't get recognized. HP in all their wisdom, sets the recovery disk to obliterate the entire HDD even if you created a separate boot partition
installed windows 7 ultimate(tried both 64 and 32 bit) to my pc. but after installation when it reboots for the 1st time, it shows a black screen with the mouse pointer. i waited 1/2 hour but no use.my pc config core2quad q6600, asus P5KVM, 2 gb ddr2 ram, nvidia 9600gt 512mb and 380 gb seagate hd also when i try to boot in safe mode it says that windows have to start normally for the first time.i installed it over xp sp3 by formatting the c drive.i have reinstalled it atleast 6 times but no change.
I am running Windows 7 Home Premium.All of a sudden, it has stopped starting up without me installing anything new.I gets past the bios, shows the Windows logo and then before the login page appears, the screen goes black and only has the mouse pointer (which I can move around curiously!).I have tried doing Startup repair, loading in Safe Mode, loading with lower screen resolution, loading with Last Known Good Configuaration, done a memory scan: they all lead to the same result.I don't think it is an issue with the Hard Drive because I can still hear it spinning, also, I am able to pull files off it when I plug it in to my USB (using an adapter). Also, Windows loads to some point and it would get stuck at the bios if it was.Don't think it is the graphics card or I wouldn't be able to see anything that I see up until that point including the mouse pointer.I have tried using Google but many places have left this unresolved or the problem is not exactly like mine.
Upgraded to Windows7 Bit32 from Vista on HP desktop machine. The only thing I get is a black screen after the startup and a mouse pointer, but nothing else.
When I boot my computer, I see "Starting Windows". The screen then goes black and the mouse pointer shows up in the middle. The mouse does not move.I inserted my Windows 7 disc and went into repair. I tried a restore and a repair. Nothing happened. I should note that also my mouse pointer was not functioning at this time, either. That is, the pointer was in the center and the mouse was not moving.I hear the fan going on, eventually it stops making noise, not to be confused with the computer shutting off. I guess you call that more of an "idle sound".I checked the connections. Unplugged and replugged in the mouse. No luck.
My mother in law has an acer aspire 5732Z, yesterday she was fiddling with the touch pad sensitivity and suddenly her screen went black. Each time she tries restarting, she gets the windows 7 startup screen, but just before getting to the log in screen, the screen goes black. The mouse pointer is still on the screen and she can hear that the computer is still on. But besides that, nothing can make it start up properly.I have tried talking her through safe mode startup, but that didn't do anything. She has pulled out the battery and restarted, which does nothing either.
i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
While attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black screen of death with movable cursor:boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an initial system startup repair which went through and said it repaired it, rebooted, but no change. I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!) tried restoring from restore point on external disk - seemed okay, then failed. chkdsk - found some stuff, fixed it, no change. tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Windows 7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow.
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
Currently, my computer will start up normally, and will, after the logo boot, end up at the login screen, except all I see is a black screen with the "Windows 7 Home Premium" at the bottom, and the red button on the bottom right, as well as the accessibility tools on the left side towards the bottom. I also have a working cursor. I dont see a user selection or anywhere to click anything except for the mention icons. I dont know what happened, but prior to this issue, I ran a Disk Check on startup as prompted. When I returned to the computer after the disk check completed, this issue occurred.
I have tried CTRL + ALT + Delete, but to no avail. I have also tried safe mode, but the same problem occurs, and all of the startup options I tried in the boot menu don't work either (Last known good configuration, Low resolution, safe mode, etc etc.). I tried checking for memory errors, and running chkdsk (Disk Check command) with the proper parameters (C: Drive, /r) in the command prompt with Startup Repair, both have no solution. Also, I don't have system restore turned on, so there are no available restore points.
Toshiba Qosmio X505-Q887 500GB HDD 4GB RAM 1GB Video Memory Windows 7 Home Premium 64bit (x64)
I'm getting a black screen when I login to my account nothings there not even the start bar or task bar it happened when I installed this theme it has an explorer file sadly I forgot to make a backup also even on safe mode there isn't a task bar and I've tried starting it via task manager but doesn't work
I got the Windows 7 RTM quite a while ago and had no problems with it. A couple days ago, though, I recieve a black screen with movable cursor after login. I am dual-booting with Windows XP, and XP is working fine.
Task manager will open, but is 'hidden' under the black screen. Same with everything else but the cursor. I suspect this has something to do with VMware server, as this was the last program I installed (about a week ago) and it was also affecting my network adapters.
Ok im back with another problem with my friends computer.After the password login page he gets a black screen with only the arrow pointer, it can move but nothing else is shown, just a black screen.I have tried CTRL + ALT + DEL - New task - explorer.exe with no luck, also I booted into safe mode and uninstalled the video card driver which also does nothing.
I've had this problem for a while now and haven't devoted much time to fixing it but when ever I login after restarting it will log me in but I will be at a black screen. If I leave it for about 2 minutes my desktop appears and all is working fine. I did some research and have found nothing. Ive done disk checks, defrag, registry cleans, and malwarebytes and another antivirus only to come to the same result. The only thing I have come close to is that if I disable all services in msconfig and reboot it logs in quickly, but the problem with that is that none of my drivers work correctly. Im using an Asus G72 laptop with windows 7 premium (64-bit).
I have a sony vaio laptop that runs with windows 7. Everytime i turn on the laptop, i see windows starting up, then i am prompted to enter my administrator password. after entering my password, the screen goes black and all i see is the white cursor. I tried removing the battery, then unpluging the wall power and holding the power button for 2 minutes and replacing the plug, turning on the computer and replacing the battery, but this is not working.
i was playing one of my games and then my system suddenly freezes and i can't do anything but to force shut down it, then when i turned the system back on, it goes to bios and the windows load screen (the one that the 4 colors of windows meet thingy) and after that the screen goes black as in no light display on monitor, but i could still hear the sound when (logging in) and i also think it could still go to desktop as when i used my mouse and randomly open things i opened a video and it still works(sound but no display) i tried to format the system, after format the system works well i tried to restart the pc and it works 3-5 times but when i started to install drivers and made my system restart it goes back to the same problem the display only ends at the load screen but sounds work until desktop, i don't know what the problem is but i'm guessing its my video card that has a problem can anybody help me?
For starters this is not my computer, I'm attempting to fix a friend of mines laptop. I have no idea what he was doing prior to this meltdown but the computer will no longer boot so far as to get to the windows login screen. I have tried booting in safe mode on all different settings but after the bios readout it just goes to a black screen with the pointer (same as reg boot).
I still have warranty, and today when i start up my computer it just froze and it commanded me to go to Windows Recovery ( recommended ) it went through my files and tried to repair it and i had to system restore.
as i system restored into later save date, it said that it failed?! so i didn't know what to do there. i tried hardware resetting and it didn't work.
also when i turned on my computer it would sometimes go to the login screen and it would say welcome for hours and hours, untill it became a black screen and it froze with the cursor..
When i turn on my computer it would always flash or blink once on the caps lock.
I am using my school tablet to write this since my other (gaming) laptop is unusable as I will explain.
A few days ago I turned on my (gaming) laptop computer and, after briefly showing the "Starting Windows" screen, the screen simply went black no login screen. There is a mouse which is perfectly responsive and moveable. I held down the shutdown button so the laptop switched off, then restarted. A screen came up saying "Launch Startup Repair (recommended)". I then deduced how this problem came about. Used my laptop the night before. Closed the laptop lid, thus beginning sleep mode. Battery probably at 15%. When the computer ran low on battery, it turned back on (which frequently happens) and, as the computer had updates to install, began shutting down and installing the updates, rather than the usual hibernation because 'Shut Down' is the default setting when there are updates. Computer runs out of power halfway through installation. Bad install (which I now know isn't the case). I turn on computer and - BINGO! The login problem occurs. Now, I repaired my computer and restored it to an earlier session. I then noticed that League of Legends wouldn't open (probably unrelated and have contacted Riot support). So this morning I decided to shutdown and install all the updates (which the battery charging, to make sure that there was no failure), which I think included SP3. The same "black screen at login" problem occured. The "VAIO" logo appears, then the "Starting Windows" screen (with the logo above). Then, blackness with a moveable mouse. I press the off button to hibernate and nothing happens, but if I hold it down the computer shuts off completely. I can't access any of my files or even login, so the only way to use my laptop is to use the Windows Repair, which takes over 2 hours.
I am using another laptop to write this.
My laptop with the issue is a VAIO VGN-NW25GF (says on the sticker on the front) running Windows 7 Home Premium using "ATI - Radeon" and "Intel Core 2 Duo". 64 Bit with 2GB of RAM and 320GB hard disk.
i was trying to ghost my old HDD to my new SSD. So i got my software, turned off my computer and installed my SSD. My computer wouldnt boot off my old HDD so i looked in my BIOS menu for boot order. I seen that my SSD was set for slot 1 and my HDD was slot 2 for sata i thought that might be the problem, i saved and exited. Leaving my computer off i switched the sata cables and started it up again thinking that now my HDD was set for 1. I started up my comp and it started just fine, windows logo popped up and then my screen was black, i still had 1920x1600 resolution and my mouse cursor was there (small mouse cursor). I thought maybe it didnt boot correctly so i turned it off and put in my windows CD. started up again and booted off CD drive. Clicked on install windows, and clicked on Startup repair and let it run for about an hour with nothing really changng. It was getting late and i just wanted to take out the SSD and start fresh tomorrow night ( i only get 1-2 hours a night ) to get things working so i did a hard shutdown and went to bed. Tried it before work and still got a black screen with a movable small mouse cursor, tried it in safe mode with networking and i had 800x600 ( large mouse cursor) and it still wouldnt boot my desktop.my question is if i made it a slave, would i be able to salvage my important info? so when i get home tonight i have some sort of a game plan.
