I'd like to backup my entire System or at least most of it onto a seperate Computer/NAS but as the size of what has to be transferred has gotten quite big in the meantime ( 4TB+ ) so I'm running into a problem concerning the time it takes to do this.Let me get some facts about me:Right now I consider myself a Noob when it comes to networking 2 PC's together mainly because I'm not working with it that much. Other than that I can solve pretty much any other computer problem in the blink of an eye. What I'm looking for:
- A system that serves as a backup for my entire current system which has about 4TB of storage housing - MANDATORY!
- A system that does the Copy/Move Process of the respective files fast - MANDATORY! Waiting 11.65h to transfer 1 TB of files at~25 MB/Sec over a GBit Network is an absolute no go. If possible I'm looking for something that rivals the 150-200 MB/Sec from my internal RAID-0.
- A system that serves as a MediaServer for my Home Cinema System either directly connected to the TV or a PS3 - OPTIONAL What I've tried so far: I recently bought myself a QNAP TS-412 which transfers the files at speeds of ~25 MB/Sec not giving me a happy face. Blame me for trusting the clerk at the shop where I bought it before reading through the specs. What I could do: Build a second PC from former HighEnd bits and pieces acting as a homemade NAS. Question is will this give me the results that I demand or will it lack the same way as the NAS?
I have a drive that was using PGP that has become damaged and will not boot despite trying 3 days of different fixes and repairs. I have a complete drive backup that will restore but when I try and boot after my PGP password I get 'Missing operating system'. Again I have tried decrypting and fixing but to no end.
I have another disk with a working and booting install of Windows 7 (same architecture etc) on. I have the entire contents of the non-booting system disk that I can access from the image of it.
If I booted into something like Windows Recovery or Live Linux environment, can I copy the entire contents of the non-working Windows 7 drive over the working one and expect it to work and then boot?
I was just wondering if you can suggest a tool to backup my entire computer , i have a lot of programs installed and it ll take me days if not weeks to find them all again in case something wrong happens .also i d like to know if the configurations of the programs can be saved .
i just bought a new computer running windows 7 home edition. my question is, can windows 7 make an entire image of my hard drive including (and this important) the recovery partition? If It can can anyone please tell me how. i need to have a complete backup of my hard drive in case of hard drive failure.
want to upgrade pretty much my entire system except for my video card and my hard drives, mouse and keyboard. I read somewhere that someone did this, they booted into safe mode, removed all the drivers, upgraded and windows loaded fine, and operated fine.
I dont really trust what they say because when I checked the review.. its not that good.. so finally i plan to ask from this forum instead, hoping to get answers..What are the best VCD burning program you guys ever used? I want the one that can accept all types of video and convert it on its own and burn it... Easy to use is a must...I have tried the latest Nero but its not good at converting Mp4 files... because when i burned them... the video moves so fast as if they are fast forwarded but the voice lagg behind... there goes my CD wasted...And i have tried Ashampoo as well but they did not recognize mp4 files, only mpeg... i have video converter but what i want is one program to do it all.. drag the video to the program and all i have to do is wait til its done..hoping to get your replies soon.. any software will do... i prefer the simplest and easy to use.. it can be free or paid.. but if paid make sure its worth it
Everything on my system is running like I like it to with the exception of the system clock in windows 7. It got this way when I installed Ubuntu 11.04 on a separate SSD that has to be chosen in BIOS. The Ubuntu clock is correct but every time I switch from Windows to Ubuntu and back again the clock in Windows is exactly six hours fast. I have re-set the clock to the correct time but this happens every time.
After loading minecraft and playing for a few minuets trying to close it minecraft freezes up the entire computer even task manager and then we must shut the computer off by the main power and after a few minuets of freezing it comes back to normal what is the problem?
I have a processor that is capable of handling a 64 bit operating system. Right now I am currently running a 32 bit operating system. Is there any way I could install 64 bit Windows 7 Ultimate without erasing my entire operating system?
i've totally messed up my network in Windows 7 and now want to reset it to factory settings (delete ALL present network adapters & then install only the basic default adapters)
Is it possible to do a full search for a document through my entire computer system including both external drives? If so where do I start from.I tried by going to Computer from the Start menu then selecting the C: drive but was wondering if that done a full search of the other drives.
Have all updates. after about 10 mins of play sound get weird and game freezes entire system in a sound loop that can only be fixed with hard reset. Disc and online auth. tried on installation. changed #of speakers in settings to 0 and 6, its a 5.1. No other game gives me problems.
i have Windows 7 (64) preinstalled on an Acer Aspire notebook. I've been looking high and low for a way to backup just my system state, the way I used to be able do in Windows XP. There was even a guided tutorial to help you do it on the MS web site. The resultant file was much smaller than a partition backup and was often more useful for disaster recovery than the simple restore point recovery. It only took a few minutes to create. It seems NTBackup is gone. Is there any way to do what ntbackup used to do?
I am after a way to back up - I have a lot of data that requires transferring from an external hard drive and my desk top.Is the simple drag and drop the best way?
Did a fresh install of Windows 7 64-bit and all my apps, deleted Windows.old, defrag'ed and activated. Then created a SYSTEM IMAGE using Win 7 BACKUP and RESTORE, so far so good.
Win 7 and my apps take up 43.9 GB on the hard drive but the SYSTEM IMAGE it created on my external drive is only 23.7 GB. Tried it on my laptop with similar results ISO was about half the HDD. Does that sound right? Just seems the ISO should have matched the HDD GB-wise unless it compresses or something.
Question about Windows 7 Ultimate's built in backup system.
If I create a full system backup of my "C" drive, then do a restore, will it just install the "C" drive partition only, or will it overwrite the entire HD, thus wipping the rest of the partitions? Not looking to have the other partitions wiped!
I did some looking around, but that question/issue doesn't seem to be addressed.
I have a system image that was saved to a maxtor one touch ext HD via USB. This was created using Windows 7 image making system. I am trying to copy the image to my new HDD (internal) 1TB. The problem is when I go to recovery>advanced options>restore from image and reboot, the PC cannot find the image. I can click advanced options and search for a driver and actually see the drive and the image folder/zips but Windows 7 cannot detect it. I have also copied this image to a internall HDD because I thought it may be the USB. I have not changed any BIOS settings as I am using Windows 7 on the 1TB HDD and trying to restore to that from either the Dnetouch or the F:internal HDD. Neither times will it find the image.uestions. Do I need to use an alternate program like paragon or clonezilla2. When the image is saved, it is the name of my pc. Example: Fesktop64-PC. Does it need to be in a folder or the image be a specific name? Ive seen WindowsImageBackup as a possiblity.
I successfully backed up my computer to an external harddrive using Windows 7 backup. I used Windows recommended settings.
My computer's local disk is currently 216 GB. When I backed up my computer to the harddrive it says that the backup is 384 GB. Can somebody explain to me why my backup is larger than my system's harddrive?
Also, just so you know, I don't have any previous backups that need to be deleted. And just to be sure I ran the backup numerous times always getting the same size as a result (384 GB).
I would like to have a complete backup but don't want to use up so much space. Is there an easy way to change a setting so that I can save disk space on my external drive while have a thorough and comprehensive backup.
I am going to upgrade to Windows 8 Consumer Preview, so before doing so I backed up Windows 7 as a system image to my external hard drive. In doing so, I forgot that a system image includes all the files on the drive, which means it backed up about 700 GB worth of data. That's OK except I already had those files backed up individually, so now my external drive is basically out of space for future use. Instead, what I'd like to do, is do a system image of factory state without having to lose the files already on my drive. Is that possible? I could always go back to factory condition, and save the system image, but then I'd have to re-add all my programs and files after I get the Windows 8 upgrade completed. I'd rather not have to do that unless it's an emergency.
I have a Toshiba Satellite A505 laptop. In my experience, Toshiba has one of the worst system recovery modules which takes ages to restore. To avoid this issue, I restored my machine to factory settings, deleted crapware, updated and backed up using the tool built into Windows 7.Now after a while, I successfully messed up the system that it takes 5 minutes to boot and is as slow as a turtle. I am considering system restore using the backup I made on external HDD.My question is, if I restore using this backup, - Will it delete ALL the data put on this machine AFTER the backup was made?- Will it completely restore SYSTEM to the backup settings? i.e. deleting the folders and registry entries added by the programs installed
i just ran the Windows 7 systems image bu first time. completed and created recovery disk. message said completed.when i look at my external hard drive, the created file contains 0 bytes; this doesn't seem right to me based on previous imaging software I have used.
Sandy did damage my computer, either the MB or the CPU (Intel i5-760) is fried. At this point, it is not known, if my drives bit the dust as well. There are backups on the external drive, both Windows and Macrium images.The system being built has different MB and Intel i5-3350P CPU. This is an "unplanned" system hardware update and no preparation had been made for the Windows 7 drive for the migration.
I have just done a clean install of Windows 7 and after solving a lot of initial issues def-ragging the drive everything was fine.
I then discovered windows system restore was not working would not start. Even when I enabled the in services shadow copy I set it so on the first failure it would restart which it did. It had a dependency RPc I set that to automatic when I log on. I do not know what the default settings are for these; I would have thought start up if its monitoring your hard drive.
I'm doing a backup as per norm to my backup internal drive.
System Image works fine, easy transfer works fine and both quick, but when I click on backup now, the progress bar in Windows Backup stops at 7% and won't continue any further.
I'm going t oleave this overnight to see if this will assist in any way, but this normally takes under 10 minutes.
I've been in event viewer but not being a system guy I really don't know what i'm looking at or should be looking for.
When I use Win 7 backup, it gives me the option each time I create a backup to create a system image. I created a system image on a CD a couple of days ago. Why does it ask me if I want to create another each time I do the backup? Is it talking about creating one on my hard drive, not a CD?
If it's just my hard drive then perhaps I should create one each time, but creating one on a CD is onerous. Plus, if this is the case, (that it wants me to create a CD) I don't know how that's to be done if the backup is on a schedule in the middle of the night.
Is there any way to backup the history and/or database of currently recorded programs so that if the system is re-loaded, one can re-load the history and current database? I have the actual recordings on a separate disk so reloading the system will not delete the video files.
I have run the "create system image" successfully until today. I have an external HD for that image file. It appears to run, goes through the steps and says it has created the image. But when I go to the external HD and click on the Image file that was created there is nothing there. It shows 0. What could I have done to do this. I even looked for that image file on my C: drive, just in case, but it is not there either.
