BIOS Update RAID Windows Reinstall?
Feb 10, 2012
Before I begin my overclocking project, I'd like to update my BIOS. I'm currently using an ASUS P8Z68-V/GEN3 with a BIOS of 0301. According to their website there is a new BIOS 0402. One of the two components of the update states "increased stability". So I'm thinking updating the BIOS would be groovy before I begin my overclocking project.After my week old build, I've done two things to the 0301 BIOS. I've used the ASUS OC for dummies button and overclocked it to "Fast" (not Extreme). I've also configured it to RAID.
1) Should I "un-overclock" to its original settings it before updating?
2) When I update it, will the update put the BIOS back to default settings, including the RAID setting reverting to AHCI?
If the answer to #2 is yes, then it will default to AHCI rather than RAID when the update is complete.....so is it just a matter of resetting it to RAID before attempting to boot Windows again? I ask this because of the pain I experienced when I had to reinstall Windows after going from AHCI to RAID the first time.
View 5 Replies
ADVERTISEMENT
Feb 1, 2013
First off I am running Win 7 on a primary SSD, and have 2 1TB HDD in RAID 1 for storage. I have been running this setup fine for a while now. I recently updated my BIOS (P8P67) using the EZ Flash utility from USB per the following steps:
-Restore defaults
-Flash new BIOS
-Restore defaults
-Reset SATA mode to RAID
Everything went fine, and I verified that my BIOS was seeing the 2 HDD as 1 volume. The Intel RAID controller shows the mirrored volume and 2 drives on bootup, all fine. However, when I get into windows, the RAID volume is not listed in the Intel RST software, device manager or disk management.
View 1 Replies
View Related
Mar 26, 2012
I've recently built a new pc. - i7 3930 Sandy Bridge, P9X79 PRO motherboard, 32Gb RAM, 128Gb SSD. I installed Windows OEM and activated and I also updated the BIOS; and everything was fine until I decided to reinstall Windows because I had some troubles with some drivers and I thought a clean copy will fix that.
Here it comes the problem. I booted from the original DVD, the Windows files have been copied and expanded and then the system restarted in order to continue the process. The system restarted but instead of continuing the installation process I get an error message saying the following: "Windos will not start because kernel file is missing". It also tells me that some files in "system 32" are corrupt. At this point there is nothing I can do. I tried again a few times then I stopped.
I know that the OEM can be installed only on one motherboard, but could a BIOS updated be considered a hardware change? I read other posts and everybody was saying that even if you change the motherboard the user will still be able to install the system but he will be required to activate the copy via telephone. Well, I did not even get to the point to reinstall the system. Has anyone experienced a similar problem with a OEM version of Windows 7?
View 9 Replies
View Related
Feb 6, 2010
After flashing the bios, my computer could not find the OS. The options displayed recommended that I try to repair the OS, so I made that selection with no joy. I went into the bios setup and found that it was no longer setup for my raid 1 drives, so reconfigured. When I did this, I missed setting the SATA 4/5 to IDE and went through the process again of trying to repair the OS. Once again, that did not work.
I went back into the bios and discovered my oversight, fixed it, but the computer still does not recognize my raid drives. The raid bios setup utility still shows a valid array. At this point, my assumption is that it doesn't recognize the array drive because the driver isn't loading, so I've tried to reload the drivers. The motherboard manual only describes how to do this when installing a new operating system and I do not want to lose my programs. Do you have any suggestions?
View 1 Replies
View Related
Jan 1, 2013
I had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.
View 4 Replies
View Related
Dec 1, 2012
My Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
View 3 Replies
View Related
Dec 28, 2010
My Acer 7736Z-4809 laptop (pre-installed with Win7 Home Premium 64bit, so I don't have the Win7 CD) was recently hit with a virus. I constantly got the BSOD "iaStor.sys" and a black screen. Startup Repair at first couldn't complete repair, but when I tried again, it found no errors. Tried System Restore to no avail. Was able to do a System Image Recovery using a backup on an external HD, but none of the programs worked (wanted to use Ad-Aware and Spybot to eliminate the virus). When I clicked on programs on the desktop or Start menu, nothing happened, didn't even get an "Open with." Even in Safe Mode, none of the programs worked.
I checked the Task Mgr, and explorer.exe was still there, but RAID wasn't. Went to Control Panel Programs to uninstall/repair programs, but got message that programs seemed to be already uninstalled...it was like the programs weren't even recognized. Once in awhile when I clicked on IE8 in Windows Explorer (not via desktop shortcut or Start menu), IE8 actually opened, so I downloaded Hijack This and Avast anti-virus, but when I tried to install them, I got the msg: "Installation must be on a local hard drive." Continued to get the "iaStor.sys" BSOD. I read to run Verifier and disable it, so I tried that (not sure if that made things worse).
Tried to do another System Image Recovery, but this time it couldn't recognize the backup on the ext HD. Tried Startup Repair, and it couldn't complete repair. Went to Recovery Management to reset the OS, but my User ID(?) couldn't be found. Decided to do a Factory Install - during "Setup is preparing your computer for first use" I got the error msg: "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, and then restart the installation." Every time I try to restart it, I get the same error msg.
BIOS Setup Defaults:
Quiet Boot: [Enabled]
Network Boot: [Enabled]
F12 Boot Menu: [Disabled]
D2D Recovery: [Enabled]
SATA Mode: [AHCI]
View 8 Replies
View Related
Mar 30, 2012
I just changed my disk setup from:
1 SATA HDD Primary OS Disk
2x SATA HDD Backup Disks in RAID 1
TO:
1 SATA SSD Primary OS Disk
1 SATA HDD Backup Disk
[No RAID]
Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo.
These are my steps:Settings > Integrated Peripherals > "SATA RAID/AHCI Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Next Step:Launch BIOS settings Integrated Peripherals > "Onboard SATA/IDE Ctrl Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues.
What am I missing? Why can't I set it to AHCI mode without BSODs?
View 8 Replies
View Related
Aug 25, 2012
so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies
View Related
Jun 21, 2012
I am getting ready to set up a RAID Array but this is my first time doing anything with RAID. I know how to get into the BIOS and change settings and I know with two hard drives, I should do RAID 1. However, I just have a few questions before I do this. First off, I am an idiot and did not notice that my first hard drive I got when I built the computer has a 32 MB Cache:
Caviar Blue 1TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive WD10EALX - OEM
I noticed it only had a 32 MB CACHE when I went to get another one. I then asked for the version with a 64 MB CACHE (WD1002FAEX), paid for it and left. Will these two hard drives work together in RAID if they have different sized caches?
View 3 Replies
View Related
Nov 14, 2011
I'm working on a computer with a RAID setup. It is 2 hard drives 500gb each showing up as 1tb in windows. Both drives show up in the bios but all of a sudden when trying ot start the computer I get a "Operating system is missing" error.
I'm trying to run a chkdsk form a win 7 64 bit disk and telling it to run on H; (system drive) but it says 'cannot open volume for direct access'.
The other drive, C: is just a recovery drive built into dell computer systems. I tried using a boot cd and running mbrfix to no avail.
View 3 Replies
View Related
Jan 19, 2011
I have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
View 14 Replies
View Related
Jul 8, 2010
i wanted to know i can update my win 7 and also my bios
View 7 Replies
View Related
Mar 8, 2011
I've recently been directed here from the Malware forum . I am having corrupted files which now are malware-free and I tried to do a upgrade reinstall to my system . However , at the final stage where my files are being transferred back, the updates fail and my windows is rolled back .Could someone please help me on how to solve this? I would like to reinstall windows 7 without losing my data .I am holding the Windows 7 Ultimate 32bit Upgrade CD which I've got from the Dell Upgrade program.I've uploaded the windows compatibility report ( it was the report i found on the desktop after the failed install)
View 14 Replies
View Related
Oct 29, 2012
I updated my bios on my windows 7 computer. now its telling me i have one day to actvate windows 7. I try to actvate it online but it doesnt work. and the phone busy.
I have a full copy of windows 7 so it should actvate. this is very depressing 1 more day and i wont have a dvr, gaming system and computer. i wont even be able watch cable without ceton card working.
View 2 Replies
View Related
Feb 27, 2012
Update bios asus p5k windows 7 64 bit
View 1 Replies
View Related
Mar 24, 2012
How do you update the BIOs on the asus p5k motherboard running windows 7 64 bit?
View 4 Replies
View Related
Apr 30, 2012
does Windows 7 update BIOS and DMI automatically?
View 2 Replies
View Related
Apr 30, 2012
does Windows 7 update BIOS and DMI automatically?
View 1 Replies
View Related
Oct 25, 2012
I updated the Bios from toshiba site after that my windows won't start and I can't even get to Bios setup (F2) or Boot sequence (F12). and windows get stuck as soon it starts. I can't even access to Factory Restore. I have no image. For information I am using Toshiba Qosmio X770-107
View 11 Replies
View Related
Jan 6, 2013
Update bios asus p5k windows 7 64 bit?
View 2 Replies
View Related
Sep 8, 2012
I just went from XP to a new Dell Windows 7. I have a multi-function printer that used CD drivers on XP, but with Windows 7, I had to install the printer with Windows Update and a scan utility from the manufacturer's web site. All of a sudden after a month, I can't scan, so I want to uninstall & reinstall the printer. How do I do this when it was installed with Windows Update? I see a list of drivers in the DriverStore/FileRepository folder.
View 6 Replies
View Related
Sep 8, 2012
I just went from XP to a new Dell Windows 7. I have a multi-function printer that used CD drivers on XP, but with Windows 7, I had to install the printer with Windows Update and a scan utility from the manufacturer's web site. All of a sudden after a month, I can't scan, so I want to uninstall/reinstall the printer. How do I do this when it was installed with Windows Update? I see a list of drivers in the DriverStore/FileRepository folder. Do I delete those so Windows Update can reinstall them, or were they already there when I bought the computer?
View 7 Replies
View Related
Oct 28, 2012
I recently bought a computer and it had an OS issue, so after some tinkering I was able to install XP onto it, then install 7. Everything went relatively smoothly. I had downloaded the drivers and updates from HP's website for my model computer. I went through and started installing them one by one. I came across the BIOS one and it said it couldn't install it. There was also a Windows update that wanted to install, but at the same time I had already moved to the next driver, a USB controller, and that one had completed it's installation and wanted to restart. I had stopped the Windows update and then prompted it to restart the computer.
It shut down and when it came back up, it brought up a black screen with some text, that then flashed blue for a split second, then turned off. I went to turn it back on, but there is no display now. I currently have a DVI-HDMI that is plugged into my laptop, but it says it can't recognize anything (though it had been doing fine before all of that). I do not have a Windows 7 disc. I had downloaded it from the internet and mounted it using Daemon Tools lite and all went smoothly, so I don't think that was the issue. I have a feeling that something went wrong. I've tried hitting F8, 9, 10, and 12 hoping that it would enter some mode and the display would reappear, but nothing. Do I need to burn Windows 7 to a disc and try it that way?
View 1 Replies
View Related
Apr 25, 2012
Need a BIOS Asus N50Vc(Vn) older than version 212 or program automatically install
View 1 Replies
View Related
Oct 28, 2012
I have a desktop using a Gigabyte GA-Z68X-UD3H-B3 (revision 1) motherboard. Using the Gigabyte @Bios utility, I updated the Bios to F12. After rebooting as @Bios suggested, I can no longer get Windows to boot. I've noted the following:
1) I have issue accesing the Bios setup. Sometimes I can access it, sometimes I cannot;
2) When I am able to access the Bios, I can confirm the disk Boot Priority, however it's is now showing the drives as SCSI (I only have SATA drives);
3) There is a new setup screen displayed after the Gigabyte logo screen shows. This screen now shows 'Serial ATA AHCI, Version iSrc 1.20E.
Copyright (c) 2003-2008. Intel Corporation.
**This version supports only Hard Disk and CDROM drives. **
Please wait. This will take a few seconds.
Then shows Controller/Bus/Function/Port/Device and lists all harddrives. At the end of the drive list it shows 'AHCI Bios installed'
4. After step 3, it shows the prompt 'Loading Operating System' - the boot hangs at this point.I DID backup the existing Bios before updating it. I have not gone in and copied that file to a floppy to try and flash the Bios using the backup (don't know if this is possible).
View 3 Replies
View Related
Jan 14, 2013
I just flashed my bios before trying to OC my new RAM and, as said, now Windows 7 won't start. Bios update seems successful, I can access it and the new version is written.
I'm guessing clean install but looking for some idea before that.
i5 2500k on Gigabyte P67-UD3 if it's any help. The bios update was from F3 to F7.
View 3 Replies
View Related
Aug 14, 2012
I came across a term, BIOS, and was wondering what it was. After doing some research, I found out that I have a very old BIOS,American Megatrends Inc. 6.02 7/21/2010. I am intereted in playing video games after I updated my Power Supply and Graphics Card. The games I play are becoming slower than a few weeks ago. I was wondering if I should update my BIOS. I followed the guide from: Updating the BIOS When I tried searching for an update, I could not find a BIOS tab. I read somewhere that I should not attempt to update my BIOS if there is no such tab. I would really like to improve my computer, but I do not know how. I have also read that I should not find updates from the "motherboard manufacturer's Web site," incase something goes wrong. What should I do?
View 1 Replies
View Related
Nov 29, 2012
So I upgraded my asus p8z68-v lx bios recently to version 4003 and now my desktop is displaying the annoying messages. I also attached the other two HDDs to the SATA ports that were unplugged and might have moved some of the sata cables around in the process. I had this installed by a network admin and I'm pretty sure the windows 7 isn't a fake. It was all working fine until I decided to upgrade my bios and some drivers, then that showed up. Also I don't have a key for it.
Code: Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 50
Cached Online Validation Code: 0x0
[code]....
View 4 Replies
View Related
Nov 30, 2012
I wanted to install more RAM, but Supermicro support told me I needed to update BIOS (flash it) to enable it to accept higher RAM.After I did this, the BIOS seems to have lost the record that boots my Windows 7 installation. After going through the checks, it just comes up with "Operating System not found."So I thought that, since I have two SATA drives, I could try installing Windows on my redundant disk to see if that might generate a dual boot menu.I was able to successfully install a fresh copy of Windows on the 2nd disk, but it will only boot into that one. It seems my system has completely forgotten about my other, working, installation.Is there a process for recovering the boot information and setting it up such that I can go back to using my other installation?
View 2 Replies
View Related
May 11, 2012
As I mentioned how can I update my BIOS version I download the latest BIOS files from the manufacturing site but cant be able to update it.I have HP Compaq dc5850 Small Form Factor PC and My Current version of BIOS is 2.1 and update is 3.3
View 9 Replies
View Related