i recently upgraded from a hd 7850 to a 7950 and now whenever i try opening media player or go to Internet the sound keeps fading in and out. games audio work fine.
i tried the earphone jack and its the same issue so i dont think its the gpu or hardware.
My windows keep fading and i have to click on them again to scroll or type? Its like i click off the window and onto another one but the computer does it for me, every once in a while ill have to click back onto the page im on just so i can type of scroll up and down? Does anybody know what this is? Or how i can stop it? Its really annoying (just did it then
View 6 Replies View RelatedWith an Aero theme dialogue boxes, menus, and open program panels kinda zoom or fade into and out of sight when you open or close them.Is there a way to have them just appear and disappear without the animation and without messing something else up?
View 2 Replies View RelatedI don't have Mic Boosting slider on my Audio after adding Audio Fx to the audio driver.
View 1 Replies View RelatedI can't camera audio to work with Windows 7 64bit video works great but no audio
View 1 Replies View Relatedthe newer smart phones have nice powerful processors in them so I was wondering if the DAC (Digital / Analog converters) in these are as good as the ones in a typical LAPTOP computer set up -- bog standard on board sound from a laptop computer -- not high end specialized studio stuff etc.My Galaxy III S phone can play FLAC files and plugging the output into a DECENT set of speakers appears to me to be just as good if not better than the same sound played from the computer - a relatively decent laptop computer (Sony VAIO VPCEH with Intel I5 processor). I tested this by connecting the phone DIRECTLY to the pre-amp with the music on the phone's micro sdhc card. Had I done it via the USB then that might have needed another DAC conversion so the test cases wouldn't have been the same.I use a phone app WINAMP PRO (just like the PC version) so I can use Folders / directories to play the music and it can play FLAC too -- a lot of music phone apps lack this facility which is a shame. I like also the "play by folders" too -- as I have a lot of Audio books -- saves endless tagging and creating playlists / albums. --Just point winamp to the directory / or file and play it.I find also streaming music from the phone to the receiver device seems to work better than messing around with pc software too -- especially on a laptop.Another app here -- OrangeSqueeze in conjunction with SQUEEZEPLAYER -does the job of the logitech squeeze server on the laptop. The phone will stream music from a Network (or any acessible drive) to the player device(s) -- no prob but use the Wifi on the phone --not the DATA content from the phone company !! otherwise your Bank balance will diminish faster than Spain's Economy.
I used to be very sceptical of smartphones --even have some posts on the forum saying I'd never buy them -- however I have to eat my own words -- the latest crop with the latest Android version are incredibly useful now and possibilities seem quite exciting with what you can do with them.Seems to me that we don't need to do much Multi-media streaming from Windows 7 in the future as your phone will handle it. Perhaps Ms is getting this right by gradually withdrawing a lot of multimedia in the standard version of W8.
Starting about a month ago, after six to seven months of my laptop working fine, I've been getting video and audio stuttering whenever gaming or watching most HD videos and after messing around with my drivers I realized that whenever my Realtek HD Audio drivers are disabled my video runs flawlessly, but when enabled both video and audio stutter. I'm using a Sony VAIO laptop so I'm assuming that the sound card isn't easily replaceable. I've tried using the newest drivers straight from Realtek's website and also the outdated driver provided by Sony's website, both of which result in the same stuttering. Sony has also replaced the motherboard once and it did not resolve the issue.I'm currently running Windows 7 with 6gb of RAM and an NVIDIA GeForce 330M graphics card.
View 16 Replies View RelatedYesterday when I got home I could not get my headset working on my PC. It's a USB headset (Tritton AX720) but it works perfectly on my Xbox 360. There is sound coming from the headset but it is really quiet. My speakers to my computer work fine, it's just when I plug the headset in I'm not getting sound. I was working on it for about an hour last night and I can't figure out what is wrong with it. So far I've tried to make it my default audio device, I did a system restore to a few days ago, and messed with the setting a little bit. This headset has worked on my PC for about 6-8 months up until yesterday. By the way my audio for my computer is still working perfectly. It is only when I plug my headset in that it isn't working properly. I'm completely lost on what is wrong.
View 1 Replies View Relatedhow i can reinstall my main audio drivers so they stay installed and so i don't have to uninstall and reinstall them at every startup. it still says it's in use if i try to test it before reinstalling. to reinstall it i've been going to playback devices, right click properties, click properties on the new window, change settings on the next, last window click the driver tab and uninstall. then i go to device manager and scan for changes. it's really a pita DISREGARD THIS: ok so i've been trying to port audio from firefox to reaper + asio4all and found that i can do it with VAC. i first tried another program called virtual audio streaming but that didn't work. when i got VAC i uninstalled VAS first. since i've had VAC installed i can't listen to anything over my monitor's speakers (have computer hooked to monitor with hdmi). if i have "Digital Audio (hdmi)" set as the default audio device, the audio won't even start. for example if a start a movie in vlc and then realize there's no sound i can't just switch the default device to something else (usually can do this) i have to stop the video select a different device and start the video again. flash stuff online just won't play until i change the device. if i try to go to the properties of "Digital Audio (hdmi)" > advanced > and hit test it tells me the device is being used by another program. this was making me think that maybe it was because VAC was using that device to port the audio from windows or something. didn't really make complete sense but i uninstalled VAC, restarted my pc and it still does the same thing. i tried uninstalling the drivers (windows default drivers, the downloadable drivers IDT high def audio cause problems with other programs so i don't use them and would prefer not to) and restarting so they would reinstall but that did nothing.
View 5 Replies View RelatedI have three audio devices on my pc (ATI HDMI, Via HD onboard and steelseries usb soundcard) and through all devices I only get audio out of the left channel. I have tried two pairs on headphones and my tv speakers all with the same results. I have looked at all the balancing end everything is set to even on both channels.
Windows 7 X64 ultimate
M4A78 PRO Mobo Via HD audio
Steel Series Usb SoundCard
I have a HTPC setup. PC includes an ASUS MB with on-board video and audio, including options for either separated analog 7.1 audio out or HDMI out (among other output options). Current setup routes Audio and Video via HDMI to Pioneer VSX-1020 A/V receiver, and routes video from there to HDTV via another HDMI cable. OS is Win7 Ultimate x64, w/SP1.
Exact model for mb is here: ASUS M4A88TD-V EVO/USB3 AM3
When I play audio files, the receiver can fake the signal into all 5 channels (I don't have a sub, so the .1 is not relevant here), so there's no issue of the receiver not accessing the available speakers.
The main issue is this: When I look into the Sound Control Panel, under Playback Devices, the active/default device is ATI HDMI Output. Also listed are Speakers (not plugged in), Realtek Digital Output and Realtek Digitial Output (Optical). I do not have any analog cables plugged in, nor do I have an S/PDIF (optical/coax) connected. The HDMI works, but only gives me the option of Stereo (2ch). When I go to the Configure screen for the ATI HDMI Output, I see a list of Audio Channels, but that list ONLY contains Stereo.
I recently changed my case and MOBO to a G41M-Combo (Intel). Ive never used front panel before due to not having the option on my sound card. Now that i have this new MOBO it has on board HD 5.1 so im using that to save room on pci slots.I have the options set to notify me when 3.5mm is inserted and the same for front panel, and also have set redirect headphone and to mute speakers when inserted.When i insert my headphones to front panel, I have no notification and speakers dont mute. Also the port doesnt light up to indicate its in use and the sound is extremely quiet. Ive tried all i can think of. I have newest drivers, checked bios settings and played around with audio settings with no joy.
View 4 Replies View RelatedI first noticed this problem when I tried to open iTunes and it came up with the message 'iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly'. I also cannot listen to music or things online either.I have looked at my computer's device manager and can't find any catergory such as 'sound, video and game controllers', which one site suggested to try and check the sound card. I have also tried to update quicktime but that did nothing. I have also tried looking at 'sound' and under both the playback and recording columns it says that there are no audio devices installed. THis appears to be the common phrase along a problem with the audio configuration. This has not ever happened to my computer before and I have had it for about 3 years now. It is a toshiba laptop with windows 7 home premium.
View 5 Replies View RelatedI turned my computer on to find no audio playing. My main audio device plays bac audio from DAW just fine but if I load a video in WMP i get a code C00D11B1. If I try to play a test tone in the sound settings I get "Failed to play test tone". I have other audio devices connected and also get the same errors which makes me think this is a registry error or some windows communication error. The only thing I think might have caused this is when I was trying to get my ram to run at 1866. This is a new build and the ram should run at this speed as it is in the QVL but that is another issue. I should also mention that I have tried reloading the device drivers, updated the BIOS, and restyored windows from a previous state with no change.
Asus sabertooth 990fx
Fx-8120
4x 4gb g skill Sniper
Visiontek HD 5770
2 seagate barracudas in RAID 0
I'm having problems with my sound, I'm getting a very loud buzzing sound and nothing else. My computer is only a year old (self built) and I have never had this problem before, I got home from grocery shopping and it was buzzing.
What I did to try and fix it:
- thought headset was broken, used speakers, still buzzing
- used windows troubleshooting, said my port wasn't being detected, fiddled with it a bit and tried front ports. front ports causing buzzing as well
- checked for driver update, nothing
- uninstalled driver (buzzing stopped)
- re-installed driver and buzzing started again
So, i do think the problem is the driver, but i have no clue what to do about it.
so i have a desktop running two monitors one via hdmi one via dvi i have my main desktop on one monitor to do internet Internet etc. and run stuff like movies games and stuff on the other. can i run two sets of audio one from the audio jack on my pc one from the hdmi to the screen? if not is there any other way to accomplish this?
if you need more info for example my pc setup just ask.
I have a m-audio 1010lt audio card which im trying to setup with my virtual XP for my DAW program. And I installed the drivers on my Virtual XP and yet it still won't work.... all i have is a stupid sound-blaster option in sound settings which i don't have or want as i need a high quality thing for recording. why won't these drivers work yet will normally work on XP ?
View 2 Replies View RelatedI have been trouble shooting my sound for quite some time with no results. I've deleted and reinstalled drivers, checked bios, etc. no luck.here are my speccy details
View 10 Replies View RelatedMy audio was working well, but i decided to start recording find a way to improve my outbound audio quality (i'm an audiophile). I purchased a Fast Track Pro. Unlike other threads I've read, I'm not seeing any BSOD and its not crackling. My operating system will just stop functioning, or freeze for a half a second at a time. This can become frequent at about 10 times in a thirty second period requiring a restart. I had installed the latest x64 driver for my W7 x64 system from M-audio's website.
I uninstalled the driver and restarted, the issue persisted. I then installed the on-board audio driver and restarted, no system lag is present. The audio device-driver is acting up and I'm not sure why. Because i bought it used M-audio's support is a no-go. Are there any additional steps I can take which may troubleshoot this issue?
[code] I just bought this computer and the person I got it from up graded from XP to 7, I can not get any audio, it says my base system is not there all kinds things, it will connect to internet.
View 4 Replies View RelatedBasically, what happens to me is that my audio goes away after a while. At startup, its working fine, but after a while there is no more sound. When I restart, it works again. So its like a cycle. A cycle that I would like to avoid. Its very annoying that I have to restart my computer after a while to listen to music again.My sound drivers are installed (I have an integrated sound card). I did not modify any drivers lately, nor did I install any new programs that could affect sound. My sound is turned all the way up, my speaker is plugged in, and when I go to sound options, it detects my speakers as "default device" with a green check-mark by it.. My specs are available if you click the ""computer specs" thing by my username.
View 3 Replies View RelatedI have a JVC RX D205 home theater receiver pluged into my PC 32 bit Windows XP via USB. The receiver is about 2 years old. How would this work if I bought and installed Windows 7 64 bit? I must add that I want to continue using the USB for it.
View 1 Replies View RelatedRunning Windows 7 with Realtek High Def Audio. Speakers and headphones worked perfectly until recently. Now nothing. I've tried restoring, disconnecting/reconnecting speakers or headphones. Checked to make sure nothing is muted. Software indicates audio is playing, I just can't hear anything. My job requires getting audio so I am desperate. The PC is less than a year old.
View 3 Replies View RelatedI recently purchased a new PC and I am lacking USB audio on my Razer Megaladon headset. I updated the firmware and the weird thing is that the microphone works but no audio at all. When i try to test the sound I get a "failed to play test tone" error. The device is set as default. And worked previously on my old windows 7 32bit PC.
Specs of the PC are as follows
Brand: Gateway Model FX6840-23
Processor Intel Core i7 860(2.8GHz) Processor Main Features 64 bit Quad-Core
Memory 8GB DDR3 1333
Hard Drive 1TB SATA
Optical Drive 1 16X DVD�R/RW SuperMulti Drive
Graphics ATI Radeon HD 5750 Graphics Card with 1GB of Discrete Video Memory
Audio Sound card - Integrated
Power Supply 500W
Operating System Windows 7 Home Premium 64-bit
Motherboard Chipset Intel H57
f i move my logitech g9 around (a few circles on the desktop), audio will get really choppy as will video given video is playing (Internet so far, no local files) until i stop moving my cursor. if i move the cursor slow enough, nothing noticeable will happen... but that's not really a feasible solution.
View 2 Replies View Relatedyesterday afternoon after unplugging and moving my computer the strangest happened, my audio stopped working, but the thing is its only from the onboard audio, being the rear jacks on the motherboard and the front jack by the power button. even the my speakers were set as default device and default communication device there was still no audio, but my devices manager does pick it up, and when i plug in a jack into any of the ports my realtek audio manager does pop up saying ive pluged in something to whatever jack it is and it does chose the correct speaker or microphone option. but if i run audio threw my graphics card via HDMI to my screen then threw the sound output it works
View 7 Replies View RelatedI have "upgraded" my Dell XPS M1730 laptop from XP Pro to Windows 7, but my DVD CD will no longer recognise Audio Discs or DVDs. It will read the Windows 7 installation DVD so there is no mechanical problem with it. I have updated all drivers and the installed driver is listed as current. I have also installed the latest Firmware.
View 6 Replies View RelatedI hv been using Windows 7 for 2yrs on my HP DV6502AU Laptop, using vista's drivers for the same, everything was fine bt few days back its sound went off with a cross mark on the sound icon. I triesd to reinstall the drivers bt it shows "cannot find the media device for this driver". So i formatted my laptop and installed windows 7 again to check whether it will work or not. And the bad luck followed, now modem driver is showing the same"cannot find the modem device for this driver".
View 3 Replies View RelatedI recently downloaded and installed Windows 7. My motherboard is an MSI K9N6PGM2-V with realtek onboard audio. I have tried the XP and Vista drivers and still can not get the sound to work. The device manager shows the driver installed. The volume is turned up. I may try to upgrade the os from a working XP copy to Windows 7. Anybody have any other ideas or solutions?
View 3 Replies View RelatedDoes anyone have any experience with M-Audio's Transit USB in Windows 7 64-bit?
Employing M-Audio's BETA Vista 32 or normal XP drivers within Vista's SP1 / XP SP2 compatibility mode, I got the Transit USB running well enough under Windows 7 32 build 7068.
In contrast, the M-Audio's production 64-bit Vista Transit USB drivers have limited functionality within my 64 bit copy of Windows 7 build 7068.
Initially, I installed it with Vista SP1 compatibility mode and the device partially worked: only when both the input and output are enable, i.e., limiting output to 48.0 kHz and 16 bit. Normally, within Windows 7 32-bit / Vista 32, I have been able to disable the input to achieve 24 bit 96 kHz output bandwidth.
I can debug, but I am only familiar with the various UNIXes.
I will probably update to the newest build in a few days -- whenever I get around to downloading it.
Just FYI, M-Audio is on its way to becoming legendary for its poor and belated drivers and the accompanying obfuscated / convoluted installation procedures.
I hope I didn't make any stupid errors in this post. *finger's crossed*
"Another hardwood" - Oak
"An oppressive entity" - Man
"A letter in the alphabet" - n
WMP 12.0.7100.0 x64
I cant get the DRM individualization to install from OverDrive Media,
and therefor cant download audio books to Windows 7.
ODMedia shows that DRM = 2.5.0.0 & wants to install 2.5.0.1 that works
with WMP11 ok. I dont get the install acceptance screen.
The MS upgrade site:
Security component upgrade
"drmlicense.one.microsoft.com/Indivsite/en/indivit.asp"
upgrade button is not active.
Is there a way in this RC to get this working?
