Asus VW246H Resolution Does Not "stick" In Windows 7 64-bit?
May 22, 2011
I've spent many, many hours researching this on the interwebs, and found little to help. It seems many folks have the same problem I do, with assorted monitors.I have an Asus VW246H monitor, for which Asus does not provide driver (the site says to just use whatever Win7 drools out).Whenever I shut down, sleep, or hibernate my rig, Win7-64bit "forgets" what monitor I have and sets the display to 800x600 (or some such). I then need to make it re-detect my monitor, which it does and sets the resolution to 1920x1080.
Is there a driver I can "force" win7 64-bit to use to retain the resolution setting? How can I get it to keep the proper setting? (It's kinda like waking up to find your furniture re-arranged - not deadly, but terribly inconvenient and anti-productive.)(I have another monitor-is-blurry issue for another post (seems loads of people also have that problem.)BTW, the video card is a Radeon R6950 2GB card, and I've updated the drivers, the BIOS, everything. Gigabyte GA-X58A-UD3R mainboard, 16 GB Gskill RipJaw DDR3 RAM.I have also looked into the Power Options and set those as I deem appropriate or necessary. Nothing has made any difference.
View 2 Replies
ADVERTISEMENT
Oct 23, 2011
i want to know can i set 1080p HDTV resolution on my Monitor ? theres a option to add 1080p24 format as display but when i select it i get a message 'forcing display mode tht exceeds the reported capablities of its EDID may result in a blank screen or permanently damage the display' currently i am using 720p HDTV resolution
View 3 Replies
View Related
Oct 26, 2012
Asus VE228T that I use as the main display on my left (and my laptop screen works as the secondary screen on the right). The resolution is 1920 x 1080, wasn't displaying anything and I went to the Screen Resolution properties and tried doing what I've always done if the screen hasn't been on, choosing "extend these displays", didn't work right as the laptop screen remained as the main one (usually the Asus has switched as the main display by itself) and the Asus did turn on BUT with my laptop's resolution.
View 1 Replies
View Related
Jan 28, 2009
I have bad issues with the resolution settings under Windows 7. With a fresh install of Windows 7 I can't move up to 1600X1200. the native resolution of my monitor is 1920X1200. I started to try some others drivers but without any success. I tried to use the NV panel wich offers me the correct resolution but when I click on the apply button nothing change or kick me out of range. The exact same thing using the possible settings from the adapter properties.
The reason is that the refresh rate seemed to be lock @70hz which is too high for that resolution using VGA. Some of you may say to try with HDMI cable, but I don't want because I 'm also using an analog KVM. It reminds me a PB I had when I installed OSX on my PC, but we're talking about Windows 7 here, and of course it's not the same exact problem. It seems to be a common problem with many of you. Any solution to fix it ?
View 2 Replies
View Related
Apr 6, 2012
why does my shift key stick and caps lock stick
View 3 Replies
View Related
Jan 25, 2012
banging my head with this issue...i have an ati radeon hd 5850 and samsung syncmaster 2233SW monitor....in the games the resolution being displayed is very low, somewhere in the 1280 x 1024 type of regions...though in the game settings its showing 1920 x 1080 .rivers are latest...11.12 amd vision engine control centerbtw my desktop resolution iv put at 1280 x 800 ...wen i put it at 1920 x 1080 in the desktop d sides of the screen get cut...evn my monitors auto adjustment function doesn
View 3 Replies
View Related
Apr 18, 2011
can i download free audio driver for my pc
View 2 Replies
View Related
Sep 10, 2011
I have Dell Optiplex GX260 system. I intalled Windows 7 Ultimate on that. The resolution of screen is fine but it is not supporting 1280 x 1024 resolution and videos are not playing properly. It was not taking audio drivers as well but when I ran the SoundMax drivers for XP in compatibility mode they were installed. But display drivers are not getting installed. I even tried the various driver from Nvidia for XP/Vista/Win 7, but none of them works.
View 1 Replies
View Related
Jun 30, 2009
Windows 7 on USB stick, is it possible?
View 2 Replies
View Related
Aug 25, 2012
I've been trying to boot windows from a USB stick for several weeks now and I finally got it to work. There is a lot of information on how to INSTALL windows from a bootable USB stick...WinToFlash is a great program...but little info on installing Win 7 ONTO a USB drive and then booting from it. The methods that I did find didn't seem to work for me. I always got the BSOD...usually the dreaded "Unmountable_boot_volume" 0000000ED error. I used a mixture of the various methods to finally get it to work. First, I created a 16GB VHD on my main HD, an 80GB Intel SSD. I then used GImagex GImageX - AutoItScript to install an image from a .wim I had created from an install of Windows 7 complete with all updates (yes, even service pack 1, that had killed previous attempts at a bootability), Office and some other progams. I then used EasyBCD EasyBCD - Take control of your boot loader | NeoSmart Technologies to add the VHD to my boot list.
Next, I booted to the VHD and installed PWBoot [project] PWBoot <Latest version: 3.0.2> - Project forge - reboot.pro and used the "Patch existing system" option. I then restarted my system, booted normally (not to the VHD), and copied the .vhd file to my freshly formatted 32GB USB stick (Patriot Rage XT). After the VHD was copied, I went back to EasyBCD and used the BCD deployment tab and created bootable external media and installed the Windows 7 bootloader to the MBR. Next, I selected the newly created BCD store using the file menu, then used the Add New Entry to add the VHD using the Disk Image tab under Portable/External Media. To boot, I selected the USB drive in the start up BIOS settings.
View 8 Replies
View Related
Oct 12, 2012
got problems with my USB sticks. I have 2 Platinum 16gb sticks. I run a dual boot system with XP an Windows 7. If I plug the sticks when I'm running seven, seven says the volumes have to be formated. When I plug them while I'm running XP everything is fine. No problems...
Same system. Different OS...
The sticks are new. I tried to format them, but after I plug them into my Pioneer CDJs. The same behaviour appears.
View 2 Replies
View Related
Dec 27, 2010
I've been carrying the same one, a Kingston Data Traveler in a tiny ziploc in my pocket for years.Write the Windows 7 ISO to stick using UltraISO trial version: on File tab open ISO, on Bootable tab Write Image, then Format, Write.The installer files will be in the root but you can keep them in a folder when not installing so they don't accidentally get deleted.so that I add XP, Vista, various Office installers, Works, Adobe, Flash, Java, CCleaner, Auslogics Defraggers, PowerISO, Acronis boot disk, PW, memtest86, GWScan, etc.Instant tool kit for the pocket.
View 1 Replies
View Related
May 15, 2011
I currently install windows 7 from a usb stick. This is a standard usb 2.0 flash drive and it works very well. I'd estimate a total time of maybe 9-13 minutes to install windows 7 from scratch. Not too bad, in my humble opinion.But USB 3.0 is here! I want to install from the new USB architechture, but at 3.0 speed.Would I install usb 3.0 drivers from the initial starup screen where you would load raid or sata drivers? Or do I have to alter the installation media in some manner?
View 7 Replies
View Related
May 18, 2012
i am using windows7 OS...but it wil notsupport sony memory stick pro...how can i get memory stick pro software for windows 7 OS...
View 2 Replies
View Related
Apr 28, 2011
I have a brand new windows 7 home premium package and I would like to install on it on my laptop (windows xp). The cd drive however does not work and I was wondering if I could load the contents of the disc on my desktop and save them onto my USB stick, which would then go into my laptop?
View 8 Replies
View Related
Nov 19, 2012
I seem to have a problem, I recently created a usb drive with windows 7 on it but I can't boot from it at all, what I mean is when I press etc., on my keyboard it brings me to boot from device menu, when I tried to navigate to my usb stick and press enter it just freezes my pc, I tried waiting but it just brings up a error on my screen that windows did not boot properly.
View 8 Replies
View Related
Mar 19, 2011
I don't know how it happened but when I turn my computer on it won't load without a memory stick in that contains the recovery CD. If I put the stick everything works perfectly.The same applies to shutting down, if I try to shutdown without the memory stick in it will just stay on the log on screen. Put it in and click shutdown and it works fine.
View 2 Replies
View Related
Jul 4, 2012
1. Is it possible to install Windows 7 ONTO external USB drives (160GB passport / 2TB ext. drive)? I guess not but I just want get it confirmed by experts here.
2. Is it possible to install Windows 7 (ONTO internal hard drive) FROM external USB drives (not USB sticks) like 160GB passport/ 2TB ext USB HDD? If yes, know the procedure to prepare one?
3. Is it possible to setup Windows 7 LIVE disk on USB stick?
4. Is it possible to setup Windows 7 LIVE disk on ext USB drive?
View 1 Replies
View Related
Dec 27, 2011
I have a question regarding installation of Win 7 via USB stick.My mobo is an Asus P8Z68-V Pro Gen 3 now I can successfully start a Win 7 install but when it gets to the point where it needs to load the drivers for my hard drive it gives me an error telling me that a device driver is missing. I can only imagine it is the driver for my motherboards SATA controllers because when I run the install off a CD it detects my hard drives but when I do it from my USB 3 stick (on the front panel of my case) it tells me it can't find my hard drive. Does anyone know how to insert the correct drivers into my USB stick? Does anyone know what drivers I need?
View 5 Replies
View Related
Sep 14, 2012
installing Win 7 x64 from a bootable USB I made with WinToFlash on a Asus X401A.I know the stick is bootable because it loads windows files but after I chose language and keyboard and press install it says: "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now."I know this is a known problem but I have tried all the solution I could find, Change from USB port 3.0 to 2.0, use Ultra Iso to write Win images to stick (Win 7 32,64, Vista 32,64) but to no avail.
Note: last night when I used WinToFlash for the first time to transfer Win to the stick, instead of copying the files manually after I format the stick, I managed to install Windows but the USB ports didn't work at all, I tried 3 different sticks and nothing and I didn't have any drivers on the HDD and with no way to transfer anything on the notebook I fuleshly decided to reinstall Windows but I ran into the same "A required CD/DVD drive device driver is missing" error.On top of all of that the previous installation of windows wont boot, it says " windows failed to start. a recent hardware or software change might be the cause" and Repair your computer from the stick doesn't work.
View 10 Replies
View Related
Oct 2, 2012
how to use usbtv stick in windows 7 64 bit os
View 1 Replies
View Related
Jul 17, 2011
Recently, after trying to format a memory stick I have encountered some problems:
- After right clicking on the stick or on a partition and selecting format, nothing happens. Literally nothing, its like I didn't press it.
- Another a bit troubling issue, is that when I tried to scan with my antivirus, I get that the scan engine cant initialize, although the whole software works. I am using Bitdefender Internet Security 2010
I am currently scanning with ESET Online Scanned for viruses, to be sure I don't have a nasty one, but from what I see is that other then that, everything works fine. Finished the scan, with no issues. Also the troubling memory stick, i went to another PC, and was virus free and also was easily formatted. So i am afraid is something related to the system or something like that.
View 5 Replies
View Related
Mar 29, 2011
Tech Support Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 32 bitProcessor: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz, x64 Family 6 Model 15 Stepping 13Processor Count: 2RAM: 3581 MbGraphics Card: ATI Mobility Radeon HD 3650, 256 MbHard Drives: C: Total - 294853 MB, Free -237438 MB; D: Total - 10239 MB, Free - 5380 MB;Motherboard: Dell Inc., 0YP950, , .J6NHWG1.CN4864386C1101.Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and EnabledI have a Lexar Twist and Turn memory stick that will not open or load to Windows7 Ultimate. It tries to load driver but will not load successfully
View 4 Replies
View Related
Aug 3, 2011
I am using Internet Modem USB Stick with my computer. My computer is Windows 7 Professional. I have a problem with removing the Internet Modem USB Stick from the computer. When I insert the Internet Modem USB Stick into my computer and then I wish to remove it, I really can't do so. I, however, can remove the Internet Modem USB Stick from the computer easily in Windows XP.I think it will reduce my Internet Modem USB Stick Lifetime and there probably should effect my computer lifetime if I try to remove the USB Stick without allowing to reject.
View 9 Replies
View Related
Feb 18, 2011
I changed from Vista to Windows 7 32 bitMy Gateway model MD7329u laptop now does not display under My Computer, the Sony Memory Stick Pro Duo camera card when insterted into the Gateway card reader slot.
View 4 Replies
View Related
Nov 28, 2009
upgraded frpm asus P6T to asus P6T deluxe 2, do i need to reformat?
View 5 Replies
View Related
Dec 29, 2009
I don't want anything too crazy, just something I can take with me on my IT jobs...
I've narrowed it down to these two...
AMD - Asus X5 Laptop - Laptops at Ebuyer
and
Intel - Asus X5DIJ Laptop - Laptops at Ebuyer
The main differences from what I can see is. The Intel has the extra gig of RAM but the AMD has the better graphics chip.
I do not know how the CPU's compare.
I would be ever so grateful for some good advice.
View 9 Replies
View Related
Jan 14, 2013
My computer laptop is not detecting usb flash stick my os system is windows 7, when I plugin the usb flash stick into my laptop a pop up say's ''installing device driver software'' , then a pop up says ''device driver software was not succesfully installed '' I have tried usb stick on another usb port on my laptop but still the same popup not working. In device manager on other devices, it has a usb disk 2.0 box with a yellow exclamation mark at the side, I tried to up date, the same popup appears saying ''Windows was unable to install your usb disk 2.0 ''.Then I tried the usb stick on another computer and it worked correctly.
View 1 Replies
View Related
Nov 11, 2011
We have just bought new PC with Windows 7 after old PC died. Have tried to transfer files from a memory stick (mainly word / excel) onto new pc but Windows exploer says memory stick folder is empty. When put stick into laptop (running I think on XP) it clearly shows files are present. Have tried copying files onto different stick but get the same problem.
New PC has Kapersky and it scanned the stick when 1st put it in and found no problems with it.
View 2 Replies
View Related
Jun 5, 2012
I will probably be getting this motherboard Gigabyte GA-Z68A-D3H-B3 rev. 1.0 Socket 1155 ATX Motherboard Intel Z68 Express Intel Core i7 i5 i3 LGA1155 Processors, Dual DDR3 2133 SATA III SATA 6.0 Gb/s Gigabit LAN SLI CrossFireX USB3.0 HDMI DVI 7.1 Channels Audio-Best Computer Online Store Hous I will be putting in 4 GB of RAM. Do I need to get 2 - 2 GB or can I use 1- 4GB stick? I was thinking if I can used a 4 GB then I can just buy another 4 GB if I decide to go 64 bit.I am shying away from going 64 bit now due to having MS Office 2003.
View 9 Replies
View Related
May 31, 2009
i am reading a lot a from people not upgrading to a new build because they don't have a spare DVD or a 4 Gb USB stick handy.
Well you don't need all that.
Simply use your favorite mounting tool (i use Magic Disk), mount the image, start the upgrade process.
You might see an message about Magic Disk having to be reinstalled, dont worry, and continue.
You'll see, upgrade works just fine without wasting DVDs or time coping files to a USB drive.
View 1 Replies
View Related
