When I right-click mouse at (for example) desktop the menu open left of cursor and all the submenus open also to the left. Usually all menus open right unless there is screen edge to prevent that. This problem is in all the programs too, like all menus you could imagine now opens to the left.
I have Internet Explorer 8 on Windows 7 but when I click on the drop down menus they will pop up but go away really fast and then sometimes they will stay
I have a weird problem on my PC in that on many (but not all) drop-down menus, when I click the arrow to drop a menu it drops but then immediately closes again before I can even get my mouse moving into the options available - and this happens repeatedly. I may be able to get it to open once in every five or six attempts if I am lucky. This is mainly on dialogue boxes where most drop-down menus are found although not all. For example Word dialogues I have no problems at all.
I've done some searching around and found details of the MS System File Checker and done a scan. This seemingly found corrupt files and repaired them AND produced a 12.5MB log file. However, I still have the problem.
More searching found it could be due to multiple mice found in Device Manager (DM). Looking in my DM I found six entries under Human Interface Devices labelled "HID-compliant device" with no explanation of what they relate to. As far as I am aware I should not expect to find any more two at most, these being a mouse (Logitech optical mouse) and a Wacom Bamboo tablet. I uninstalled the tablet leaving just the mouse and rebooted but I still have five such entries. I also have two unexplained entries under "Mice and other pointing devices" labelled "USB Input Device" - a third such entry is labelled "USB Input Device (Logitech Download Assistant)"
Whilst my tablet was uninstalled and indeed disconnected, I did some further checks using just the mouse. Unfortunately it doesn't seem to make any difference - I still cannot guarantee that a drop-down box will remain open. However, I have noticed that it does not seem to affect the drive drop-down. Only the filename and file type drop-downs - at least in saving and opening dialogues but I'm sure I've had other drop-down menu types where this has also happened.
My first question therefore is: is it safe to remove the excess HID device entries in my DM and do I have to boot into Safe Mode to do it?
PS I should add that my mouse has a switch on it enabling me to switch it off when not in use. It is therefore switched off most of the time. Also, prior to reinstalling Windows 7 on 12 October I didn't have this problem and I had exactly the same system hardware config and the same software installed.
I can get Windows Explorer to open to a specific folder in the Right Pane, but it only shows the "Computer" or "C:" level in the Left pane. I have tried pinning the folder to "Start", and have also tried various switches (n, e, select) as the target in Explorer.Attached is an example where a shortcut in Start opens TechInfo in the right panel, but not the left.Is there any way to open the folder in the [I]left[I] pane also? It's a minor issue, but a pain
if i leave my comp idle for a few hours i find that none of my programs start, and sometimes i cannot even open olders on my desktop, double clicking any shortcut or even the .exe in the root program folder results in nothing happening. the start menu still opens but i cant select restart or log off as they do not appear, i can still shutdown but it takes about 30 seconds before acually responding and shutting down.Also should mention that if i open any program eg: photoshop or nero and leave the computer idle, when i return and try to continue using the program it will stop responding most of the time, any either ctrl-alt-delete or shutdown is required to quit.my power management setting are all off, hybrid sleep is off....my comp is set to never sleep in any way.i am running windows 7 pro x64, i3 processor, 4gb ram?
I just recently bought an HP Pavilion p6730f BV533AA#ABA Desktop PC - Intel Core i3-550 3.2GHz, 6GB DDR3, 1.5TB HDD, DVDRW, Windows 7 Home Premium 64-bit. Right out of the box it started acting a little touchy. I bought to get a project done for a client, so immediately I installed Adobe premiere cs5 along with a slew of other programs I use day to day. Within the first two days I noticed it would sometimes fail to open new programs after it had been left on for about a day. For example: lets say I go to open firefox, so I click on the firefox icon pinned to my taskbar. It glows, as if it is loading then fades. As if the computer forgot what my request was. I try clicking a few more times; same thing. So I go to the shortcut in my start menu, click it: same thing. the little circle appears next to my cursor for a moment, then the request is gone. Tried hotkeys; (windows button plus number position on taskbar) still nothing. I then try every program on the taskbar, each with the same results. (and giving proper time for the computer to think) Even simple programs like text editor will not open. To top it off, the shutdown process wont even initiate! At which point I have to hard-crash out to restart. After a fresh restart it works fine for a few days or so till this happens.
But I just cant figure this one out (neither can google) . So i can LEFT(<-this is important)-click all the icons in my system tray and a nice menu of some kind pops up (as it should) how ever if i LEFT-click my network icon nothing happens (right-click functions still work), sadly i dont really know when this started happening so i cant backtrack it. this is a problem because now i cant select other wireless network.
I'm used to W7 remembering the last known positions of all of my open windows, but lately (and I can't recall what change may have prompted this) every window opens in a maximized state, and upon restoring it, always sizes down to the default window size, jammed right into the upper-left corner of the screen.
While typing, and it happens mostly in Word but occurs in any Office program, a random drop down menue appears. In addition, a letter will get highlighted like I did a search on it, also lines of text in the middle of a paragraph will shift and center for no reason. I have Norton so no problems there but feel like my laptop is possessed. Using Windows 7 and Office 2010.
I am struggling to come to terms with both Windows 7 and IE9. Call me a ludite, but I still prefer XP. Never mind. More importantly, I do miss the drop down menues that were a feature of previous versions - where, in particular can I now manage my toolbars, ensure everything is locked etc. And finally, is it possible to convert the 'Tools' button into a toolbar?
Is there a way to customize context menus? For example, if I right click on the task bar a context menu comes up and one of the options is Start Task Manager. This menu option runs tskmgr.exe in the Windows/system32 folder. Can I make a option like this or change the option in the menu to run a different program or shortcut?
I have a quick simple question. Only some of my menus are being highlighted with a graphic. The vast majority of them are not, and it is ugly annoying for obsessive people like me. This is what I mean:
Everything should look like the one on the left, but most of them look like the one on the right (based on the selection color).
I have recently added a cascading menu to each of the "desktop" & "my computer" context menus. Both work fine except after powering up the computer the "my computer" cascading menu takes 8 second before showing the actual cascading menu items.After this initial wait the cascading menu shows and works as normal without any delays.
After installing and then uninstalling (because of BSOD) the fubar'd security patch from last week, I now can not get right click menus anywhere. Nothing happens when I RT click. I've googled and gotten many hit on single missing items but nothing on all missing items.
It seems my registry is broke, under. HKCRAllFileSystemObjectsshellex it contains "(Default) REG_SZ (value not set)" that's all
HKCRDirectoryshellexContextMenuHandlers "REG_SZ (value not set)" DesktopDockShellExt "REG_SZ (value not set)"
Then several apps have there menus add on listed all with data in them. It seems to me I'm missing some data points in these registry blocks. Dose anyone know what is supposed to be in there?
I have 7, 64 bit, running on an HP and have been keeping pretty up to date on my drivers.amd a4 3300 processor with graphics card, and 4 g ram.When trying to use menus, the window or entire screen will seem as though it refreshes, closing the menu, i can watch the bar across the top of windows flash as if it had just disappeared for a split second and the menu is gone, leaving me to reopen it, but at a second or less between these refreshes I have to be quick on the pointer to get to what I want. It seems to happen on any menu item, including all drop downs, wether im right clicking a start menu pined item, a choice dropdown on a webpage, a setting dropdown, etc. it doesnt alwasys do this but more often than not. It seems like I can sometimes restart the pc and it will work, but it often will do it right at startup. I hadnt noticed it til I connected the VGA out AND the HDMI out to the same tv (dont know why I did it at the same time, I think to compare the cropping). Also, I used system restore to go back to before a bunch of updates and it seemed to fix it, but that might just be because the pc restarted in the process.
I have recently installed windows 7 and one of my program (Autocad) has menus that used to stretch from the top of the screen to near the bottom of the screen. Now in Windows 7 the spacing between each line on the menu has increased causing the menus to be much taller, and scroll off the screen.Is there any way to adjust this line spacing in menu items in Windows 7?
In Windows XP and earlier, I could paste a folder into the Start Menu folder, and when I opened start menu, I would get an expandable folder right alongside Programs. I'd like to know how I can do that in Windows 7. I have a folder in which I put shortcuts to documents I use often. I could pin it to the Start Menu, but when clicking on it, it opens an explorer window with the shortcuts. I want to have an expandable menu like the Start Menu. I was able to do this in XP just by pasting that folder inside the Start Menu folder but that doesn't seem to work in Windows 7.
I still use the quick launch bar in Win 7 and I'm wondering something: is there a way to make a folder on that bar appear as a pull-down (or, pull-up) menu?I mean similar to the way Chrome allows you to make a folder on your bookmarks bar, in that clicking it brings a pull-down list of those bookmarksSo in this case, I'd like to click a "games" folder on my quick launch bar, and have it open a menu similarly, rather than just open a folder of links.
seem to have a bit of a problem with my start menu, when i8 click on a sub menu it does not away appear, i have included a pic, right clicking on one of the other sub menus then click on the one that just didn't appear makes it show up right, you can still click onto the menu and get an "unknown" item to work, its a custom install with RT Windows 7 Lite that i just installed?
I have no viruses, all software, flash, drivers, and BIOS are current. I have no gagets running, have all animation and effects turned off. The simplest example is trying to click on the taskbar icon for sound to mute or change the volume. When I try to move the cursor to the pop-up, it disappears. Same thing happens with maxmized windows, I cannot use the taskbar icon to close them. The pop up disappears when I move off the task bar. When composing email in Windows Live Mail , I cannot keep the cursor in the Subject line to type a title. (To get the subject line for this email,I had to type it in the body and cut/paste.) The mouse focus shifts to the body of the email. I have tried USB mice, cordless mice, trackpad, all do the same.
I have recently installed windows 7 and one of my program (Autocad) has menus that used to stretch from the top of the screen to near the bottom of the screen. Now in Windows 7 the spacing between each line on the menu has increased causing the menus to be much taller, and scroll off the screen. I already looked to see if I can adjust in autocad but can't find any settings for this.Is there any way to adjust this line spacing in menu items in Windows 7?
all of a sudden pop ups / menus / flyouts (or whatever they're called) are now coming up on the left side of the mouse cursor, not the normal right side.
For example, on the Desktop of you right click on an icon to view properties, the menu is on the left (the top right of the menu is at the cursor point). If you go to a sub-menu, such as 'Send To,' it flies out even further to the left instead of on the right.
Is this maybe some sort of Left Hand/Right Hand setting or the like?
It seems like the system is constantly cycling somehow, so there is never enough time to select from the All Programs list, or for a taskbar right click or even hard to select an app when Alt-Tab is pressed. You can see a slight blink on any open apps which seems to instantly preclude any open menus. It is very hard to select from any drop down or selection menus from any appl. I have tried Scannow, malware scanners, creating new profiles...all to now avail.
This started a couple of weeks ago and it's driving me nuts. If I click the folder icon on the taskbar on my desktop, The libraries window opens fine, then if I click on documents or pictures, etc, that opens fine/quickly. BUT once the folder is open, if I right click on any of the pictures to get the menu for opening/sending the pic somewhere, etc, the little blue delay circle pops up for up to a minute. If I try to cancel it, it shuts the whole library page down, if I wait for a minute or two the menu will finally pop up and allow me to make a selection. The same thing happens over on the left side if I try to click the little arrows for the drop downs under the main folder headings, it takes forever and if I try to cancel it shuts it down. Same thing happens when I try to search for documents.
Ive been looking and looking, but i cant seem to find any option where to change the font of the menus and pop-ups like the ones in the picture below..
I don't know how the default font got overwritten by this ugly one, but it sure ain't pretty .
I have a home network with two printers attached to the main computer. I got tired of seeing bogus listings in the drop down menu, either leftover from when the printers belonged to a different computer in the network or even listings of printers that were long gone. I opened up Control Panel and cleaned things up there so that only the actual still-existing computers are still there, and yet they continue to show up in drop down menus on other computers in my network.