before people say anything about what i want to do, 1, yes i am crazy and 2, i have 4 days off work, so i need something to do.
now with that over, lol, this is what i want to do.
you know how most laptops have a hidden recovery partition, where you can use the Alt + F10 combo or something similar to reinstall windows, i want to make one of them, and put it on my laptop, so if i am ever needing to reinstall windows, i can do it, without needing all of my disks.
i know most people are going to say just use ghost or something like that, but i have games like bioshock, and ra3 etc installed, and i want to include them in the recovery partition.
yesterday I ordered a Crucial M4 128 Solid State Drive. I want to use it in my laptop as a bootdisk for my Windows (my laptop has 2 hard drive slots). My old hard drive came with an Acer recovery partition. My question is simple (I hope the solution is also simple): how do I move the recovery partition from my old hard drive to the Solid State Drive? All the necessary drivers are on the recovery partition, which is the main reason I want to have it on my SSD.
EDIT: will I lose the functionality of restoring my laptop when pressing ALT+F10 on boot?
I know that acer recovery partition topic was here often but not quite like mineecently my disk broke down and i could not boot up in any way possibleI could not see the disk on linux, and not on windowsI had there very important data so i without thinking used windows 7 rc dvd, i have run chkdsk c: /f to see if i can resurect the diskSo it worked it took me 14 hours to do it but i could log in to windows safe mode and copy all my dataNext step before sending my laptop to waranty would be to try recovery programm but it did not workI tried to do it with alt_F10 but it did not work either, showed me some strange screen with option to choose diskAfter that i used macrium reflect to see what is in the hidden partition and it is filled with 100MB of data, there is no image there
When i turn the computer on i get the screen : setup is starting service. Install Windows. The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click ok to restart the computer, and then restart the installation. I have contacted acer they tried to help with the ALT and F12. Nothing I have tried works.. They told me to order the recovery discs for $20.00. I did , and they dont work either... I contacted them back, and now they say to send it back to them and for $199.00 plus shipping, they will repair the computer..I do not have the money for that..I have the the system disc, the 3 recovery disc and the language disc , that I just ordered from Acer for $20.00.
When I press down f10 and ALT at the same time during boot up from the factory recovery disk when seeing the splash screen, nothing happens and the 'acer laptap just boots from the regular hard drive as usual.
I have Unallocated space at the very end of my hard drive, even after the 25gb Recovery Partition, this is due to copying my old hard drive onto this new one via Clonezilla, and it automatically keeping the unallocated space at the end. Can I either move the unallocated space around the Recovery Partition, or delete the Recovery Partition altogether? Sorry if I am being a little unclear.
I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
is not empty - it is almost 80% full but when i click on it there are no files. Tried - to the extent of my knowledge - to see if the files are hidden but didn't reach anywhere. Tried a restore point but that didnt work either.
i recently was using a product called ptedit32. In which i was trying to unhide my pq service to see what was in there. So i changed its boot from hidden to active.(0C was changed to 07) with the other three partitions being 07 as well. This has turned out bad for me now. It seems there is a mbr that is not being recognized. I turn the acer 0ne aspire d255e on and the machine goes to a screen that say can't load windows due to recent hardware or software changes.Status: 0xc0000225It also ask to have the installation disk inserted, of which there is'nt one and the computer doesn't have a dvd/cd drive anyway. It was all on the pq service, which is the hidden partition. I've tried flashing the acer pc as well from usb. and can't get that to work.
My daughter has a Dell XPS with Windows 7 on it. It was having alot of issues so short verision after several house with Dell support they told me I would have to tell the computer to go back to the factory version. I followed the steps told to me and now nothing works. When I turn the computer on I do get the Windows word to start then a flash of something that could be an error message of some sort but its not there long enough for me to be sure. I then get something about I need to run a repair, which I do but the repair doesnt work. I tried putting the original install disk in the same thing happens. I have been told to try getting the recovery partition to open but I dont know how. Does this sound right? If so how do I do that and if not what should I do.
I have a Asus k52jc laptop with windows 7 home premium pre installed. Now I cant recover my windows installation using recovery partition.It does not appear in the boot menu. But i can see the partition is still there. I cant create a recovery disk either.
just want to know if it is safe to delete the recovery partition so i can unlock more gb in my hp notebook. when i first bought it, it was with vista preinstalled. so the recovery partition is vista, but i did make a complete rescue disk of my computer the first time i turned it on with windows recovery. so my question is, is it ok and with no problem, that i can just format the recovery partition, since i actually never use vista, but windows 7. it wounldt mess my laptop??
I have an ACER One (Model A0531h) netbook. I have now tried several times to recovery it to factory settings using the built in recovery partition. I access this recovery partition by using Alt-f10 during boot. The recovery runs fine up until 99% where it 'sticks'.. for days..The application running the recovery is Acer eRecovery Manager v7.5.15. I have also recovering using the recovery DVD's which I burned. They seem to go through the process but then when I restart the system I get a black screen complaining about missing files. I am then instructed to run recovery...This is driving me crazy. I have also reseated the RAM but dont want to have to strip of the cover to reseat hard drive. I can however hear it running and I have also used Active@boot to reformat the C drive. The recovery partition has not been touched and is not damaged. It runs perfectly up to 99%.
everytime i try to factory reset my pc with erecovery managment, it never finishes once it gets to the end, it will say installing sysprep - factory mode, 52/52 and never finishes after that. is there any third party software that can factory restore my system? i noticed windows boots just fine even tho i didn't finish the whole software installation process.
Made the mistake of deleting this partition, and really regret it since it would of been handy to have if i install win 7 again. So feeling bad about that. Any way i could get a PQSERVICE (a recovery) partition back on there?
My sister just got a new laptop with 7, then accidentally installed a friend's version of 7 on top of it, thinking it was Microsoft Office. I'm trying to restore to factory settings so she doesn't lose all the software that came with the computer.
I know the recovery partition is on the computer (I made it appear by assigning it a drive letter). But I cannot boot from it (or whatever I need to do to access it).
I have tried the following:
1) Advanced Boot Options -> Repair -> System Image Recovery: no system image -> System Restore: no restore point
2) all possible F# keys at startup, including F10 which got me to Edit Boot Options, which seemed hopeful because it named the partition number, 3, but did not allow me to change it (the recovery partition is 2).
3) F2 -> setup (nothing there)
4) burning an iso of Windows 7 recovery disc, which just gave me the same repair tool as in the 1st attempt.
5) setting the recovery partition as "active" (in fact, I think it was already active).
I recently upgraded my Acer 722 netbook to an 265GB SSD and installed Windows 7 on it. I was wondering if there was a way to create a partition for a recovery environment (just in case something happens). I have a system image of this pc saved, however I feel it would be best to also create a recovery partition.
I am using dell insipiron 1464 model with preinstalled windows 7 home basic os.i have lost my installation cd.now how do i take backup of my os in separate dvd or usb drive with the help of recovery partition.
I've been to their chat they said if I install Windows7 It will erase/delete my recovery partition.. is there anyway i can avoid this? I'm making a recovery disks right now will that help?
Ive got a dell xps 8300 that came with a recovery partition on the hard drive. Its taking up about 19 gigs of space and is not needed as I use recovery software on my machine. I want to format this partition and merge it with the rest of the C: drive. How do I go about this. I have tried right clicking on the partition but the format choice is greyed out
I have a Sony Vaio VPCEC4SOE I bought cheap - needs a new screen.After purchasing first thing I done was a Reinstall of windows using F10 on boot up and following instructions.However after all finished Task manager showed 90+ processes at idle and the amount of bloatware was more than I had ever seen included with any PC.So, Made up a Windows 7 Install disc as I wanted to go for a totally fresh install. Once installed it asked for product key - I checked underneath and half of the sticker is missing (I know I should have checked before hand!) Plus thinking about it after I really don't think the product key can be reused even if it is on the same machine (can someone confirm?)I now have a nice clean operating system, but no product key, that will self destruct in 27 days! So I would like to return to VAIO factory state. I have checked and recovery partition is still there and intact - 13gb, but how can I reinstall from this partition? F10 now does nowt on boot up.
I'm upgrading a Compaq Presario running XP that has a recovery partition installed by the manufacturer. It's my understanding that the recovery partition will be useless after the upgrade. Should the drive be reformatted and the partition deleted?
I have not backed up my system for 2 years, last time it was brand new with vista, now I have win 7. This partition is taking up a couple of gigs of hard drive space. So is it OK for me to wipe this partition clean? Does it auto-save stuff on it?
i've fitted a new hard drive into my laptop and want to get rid of the recovery partition on the one i've removed.I've formatted it via Disc Management but the 15gb Recovery Partition remains there. Is there a way to format it so that i get the maximum amount of disc space.
I had got some virun problem in my HP laptop so that I use a recovery partition in order to install Windows 7, but unfortunately during installtion the system stucked and I think my recovery partition is also corrupt. Now I want to install Windows 7 without using recovery partition and want to use my own Windows OEM key but the question is that how can I get my Windows 7 product key from my recovery partition, actually the sticker on the bottom of my laptop wipe out as well as I cannot run keyfinder program because I couldn't login into my Windows. Is there any possibilities that I can get my product key from my recovery partition.
Just want to run something by you guys before I install my compy of Windows 7 Ultimate on my laptop.
I have a Fujitsu-Siemens Amilo Xi 2250 with Vista Home Premium. When I got the laptop I created the restore DVD:s (3) and have since then used them a couple of times.
From what I've gathered reading trough this and other forums, and from my own knowledge and experience it should be safe to remove the recovery partition from the HD right? Or could I run in to some kind of problem if I'd like to go back to Vista using my recovery DVD:s and the partition is not there? As I understand it if I for example had a Dell it whould be ok, but could it be different on my computer? Or do these recovery-partitions always work the same way?
Also, if I decide to leave the partition there and I do a clean install of Windows 7 will this do anything to the restore partition? Cause in that case I could just leave it there right?
I have tried to Delete my Recovery Partition on my Acer Netbook but it doesn't work. I have the boot files on the C: Drive. My Recovery Partition has nothing on it.
I have used the cmd
select volume 1
active volume 1
delete volume 1
and than cmd freezes up on me and all i can do is close the program or check for online solution
than after i try
select volume 1
active volume 1
delete partition
i get an error:
"Cannot delete a protected partition without the force protected parameter set."
I have also tried to go in the Disk Management section and delete the Recovery Partition but when I select it, I can only click on settings.
How can I make the Recovery Partition become usable?
