I just bought a 40" samsung so I want to use this PCI card with my other ATI Radeon HD 4800 card.
I think its possible from the discussion here: ATI 9250 PCI video card problem
I just can't figure it out. I can't seem to install any drivers at all as it defaults to the Standard VGA Graphics Adapter Drivers. Right not it says "This device cannot start." It has been out of a computer case just laying around for about a year... is it possible its broken? I haven't got anything out of my third monitor. If I needed to replace it can anyone recommend me a new one?
Well either 7 is to advanced for this little PCI video card or ATI is falling behind.
I just installed 7100 build or the RC (if it really is lol) on my older P4 2.8 with this video card installed and I can not for the life of me figure out a way to get the drivers installed for this card.
Right now the default ones keep my display under 1280 by 1024 that the monitor should be at and the 7 drivers off ATI's site don't work. Windows is calling it "Video Controller" and I try to update with no luck.
I have a ATI Radeon 9250 video card and I need a driver for it. I have the Windows 7 7100 build. If there is a driver can someone please post the link or where i can find it.
i have just installed windows 7 on an older system with a radeon 9250 128mb agp video card.
i tried installing the latest catalyst driver package just to see if they would work but they didn't detect the card, and i couldn't manually update the drivers via device manager since the card would not see any compatible drivers.
is there any supported drivers avaialble for this card for windows 7?
I have read numerous posts on how to get the ATI Radeon 9250 card to work with Windows 7 but I cannot get any solution to work with win 7.64I do realize that this card is not compatible or recommended for win 7. I just need to get it working short term until I can buy a replacement, this is the only PCI card I had to get this new system working.
I have built them formatted them, fixed them added components many many times...This is my issue, Internet explore won't open....well it opens and I get a ap crash notification. I take out both of my different videos cards and use internal video and it does not crash. The problem is this is my living room movie file player and the video cards make a huge difference....I also need explorer as well....now Chrome works but that is not what I want..
I have a "SanDisk Ultra CompactFlash" 4GB card and an internal card reader (HP desktop). When I insert the card into the reader, the green light above the slot turns on as if it recognizes the device, but it doesn't show up. Device Manager says that the driver is installed and working properly, and I have uninstalled it,reinstalled it, and restarted my computer. A system restore isn't really an option because it isn't my computer.
I purchased diablo 3 for my husband & my video card is not supported so he's unable to play, my computer is a HP P624 f-b desktop with a Intel GMA intregrated graphics, I am aware I need to up my power supply also, I have no idea what video card can be used to upgrade so the game is playable, not looking to spend a fortune?
PI have to use onboard sound card to have audio through HDMI output from video card. The external sound card installed is Xonar DG and it comes with SPDIF output header to be interfaced with video card. But I do not see no such header on the video card. I wonder what video card has such an interface header.
I have recently purchased Samsung RF511 notebook and I have been trying to run HD video files(mkv) and they do run but it is very laggy and stuttering occurs very often. So I looked a bit into this matter and what I have found is that the VLC player that I am using to play the video files runs of the onboard graphics card and not the nvidia 540M card that is also installed in this notebook.
my sd cards work fine on my other computers, all of which run windows 7 32 bitbut, over the past few weeks i have had 3 computers, two of which i returned thinking they had defects, but this one does it too when i first insert the sd card, it reads the drive as active, in this case E drive but NOT the sd card inserted into itso what i have to do is right click it, click EJECT, i get a pop up saying it is in use and option to cancel, or continue, i click CONTINUE, take the card back out, reinsert it, and it is fine.
I have Dell Latitude E6410 with PC Card Bus, StLab USB 3.0 PCIe card connected with StLab PC CardBus/PCIe adapter. OS is Windows 7. USB 3.0 card do not want to work (system do not find it - no USB 3.0 controller). Other PC Ie cards (modem ...) work with this adapter and USB 3.0 card works in other notebooks with PC Ie bus (without adapter). Is it possible that the card and adapter (from the same producer) are not compatible?
I have sent in my computer to get repaired and got it back yestersay. Since then i've been trying to get it to work properly again.I can't play any of the games I used to play before I sent it in to get repaired (for example, Battlefield 3). I can start dota2 but it looks pretty messed up. My computer shows me that I have an nvidia geforce 7025 nforce 630a graphic card.Although it says in the computer description that it SHOULD have a AMD HD 6870 1GB GDDR 5. My screen isn't plugged in the graphic card, since it doesn't recieve anything from there. It is plugged directly to the motherboard.So, from what I understand the nvidia card is the integrated graphic card or am I totally wrong?Anyway, the device manager can only find the nvidia card and I cannot run any game smoothly on this computer.Before I realized this possibility I've tried to download newer drivers for the nvidia card, but it didn't help.
I install OS windows 7 and I have SS2 card (for satellite channals)
I install drivers 4.1.1 and card not work I try with 4.3.3 BETA drivers and card not work i try with 4.5.0.0 and not work i use ProgDVB programm when I start this program I got this message SS2 card not found but my computer have this card and it is network adapter and work properly! I dont understand this problem so anybody know for this problem solution.
I've got a Biostar TA790GXBE motherboard with onboard Realtek RTL8168D NIC. This has three boxes under Power Management:
Allow the computer to turn off this device to save power Allow this device to wake the computer Only allow a magic packet to wake the computer
I've added a Realtek 8139B NIC which only has the first option with the second greyed out and the third not present. However, under Advanced it has:
Shutdown Wake on Lan: Enabled Wake on Lan Capabilities: Magic Packet & Pattern Match Wakeup on ARP/Ping: Enabled Wakeup on Link Change: Disabled Wakeup using APM Mode: Disabled
I want to connect this NIC to the router for Internet access, with the onboard Gigabit NIC connected directly to another PC for RDP. If I run a WOL monitor, I can see it receives the Magic Packet on this interface, but it refuses to wake from shutdown, hibernate or standby.
In the BIOS it only has two relevant options: Power-on by PCIE/onboard LAN Wakeup by PCI
Since I use a netbook, a lot of programs i run are installed to my SDHC card. Windows 7 won't let me pin the shortcuts to the taskbar for any of my programs installed on the SDHC card. Is this a replicatable problem for anyone and is there a fix.