I have recently upgraded my vista sp1 to sp 2. and since than having many problems:
1.System restore does not apper to be functioning correctly on this system. The volume Shadow Copy service used by system restore is not working 0x81000202.
2. NTI Shadow says Error;0x80040154. Class not registered.
3.My internet connection stopped working. It says: WLan autoconfig has faild, class is not registered.event id 7023, local id: 6153.
I am writing now from a different computer. My computer lost connection to the internet. It was working yesterday. I tried to restore to restore point but vista won't allow me. It says
"Restoration Incomplete. Your computer cannot be restored."
my son decided to do a full recovery of his hp530 laptop for some reason and all seemed to go well but for one small proberlem, he cannot access the internet connection unless he uses the routers dongle which works alright. laptop hp 530vista home basicrouter dynamode+donglevirgin cable b/bi.
View 8 Replies View RelatedWhy can't I use system restore to restore back to certain restore points? I was only successful twice with it. When my laptap was new and when I used it after re-formatting my hard drive. On all occassions after those two instances I can never restore back to any restore point. It always says that "unspecified error" line. If Microsoft doesn't know what happend, how could I. Why did they bother putting system restore if it doesn't work all the time anyway. It gives you a false sense of security.
View 5 Replies View Relatedmy computer is not holding it's internet connection, even when i refresh it just wont reconnect and i end up having to restart and then the connection is fine. I'm running Vista Home Premium, Defender, ZoneAlarm (free) and Avast (free). Broadband connection. is there anyway to secure the connection permanently (which it should be) Have i, a setting wrong? At all times my internet icon says i am fully connected?
View 9 Replies View RelatedAfter installing SP2, on 5/25, System Restore seems to have stopped creating automatic restore points every 24 hours. I checked the Task Manger and it is set for 24 hours. It shows a restore point being created on 5/26. System Restore shows the last Restore Point being created on 5/25 about 1 hour after downloading.
View 5 Replies View RelatedI have a recent problem installing Windows updates on Vista Ultimate as the update process stays on 'creating restore point' forever. I've let it run as long as 7 hours in this state, with no change. It looks like the system is unable to make a restore point sucessfully. I know it has worked in the past, as I'm fairly up-to-date on Windows updates. Reading some other threads, I've tried using Disk Clean-up to remove all by the most recent restore points, and then try to disable/re-enable system restore - this part without success. When I check the system properties for System Restore, the System Restore button is greyed out. I've attached a screenshot of the screen for reference. I've checked the group policies to verify the System Restore is not disabled there.
View 9 Replies View RelatedI went to accessories/system tools/system restore and clicked it. I then got a small dialogue window asking if I wanted to continue and I clicked continue. That little window disappeared but then nothing hasppened. I was expecting to see a list of possible restore points but nothing showed on my screen. I clicked system restore again and got a message that system restore was already running and would now exit.
View 9 Replies View RelatedNot sure why but when I try to open system restore I get this message: "System Protection Settings has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I cannot make or restore my computer. If I go into system protection I get this error: C:WindowsSystem32SYSDM.CPL is either not designed to run on Windows or it contains an error. Try installing the program again using the original media or contact your system administrator or the software vendor for support.
View 9 Replies View RelatedI am new here and I have been having problems with my laptop for at least a few months now. And now I am fed up with it and just want to do a full system restore. I have no disks or previous system save dates. I talked to one of my friends and he said that i need a disc. I am just coming her for confirmation and or help. I am running a Toshiba Satallite P505D with and AMD Turion X2 dual core processor 4GB of Ram and a 64 bit operating system.
View 5 Replies View RelatedI wish the ****ing dumbass companies wouldnt preload computers with useless trials and dumb****. Ever since this computerwas purchased, I've had more problems than Lindsay Lohan had with DUI and drugs.
Holy ****. Games, Personalization, System Restore, System Backup (Error code 1068), User Accounts, and Windows Update. They show up, and then they dissapear right away. Any help please? Virusscan'd with AVG, tested hardware, it's clean, I dont know whats wrong.
My wife was on the internet and suddenly System Pro popped up and started scanning warning my wife of a virus attack on her computer and wanted her to buy the AV Pgm for $49.95. She just clicked all the exits and got off of the internet and now she is locked out of her computer. We can't get system restore to work, Can't get safe mode to work, She has AVG 8 installed but cannot start it. Tried SFC /scannow but was denied access. Tried putting the Windows XP disk in to do a repair and was unable to get it to start. I think the only thing to do is reformat the HD and start over but her PC ignores the A drive and the dvd drives. I cannot get into it in order to re format it.
View 9 Replies View RelatedI am trying to get rid of system restore shadow copies on my Vista home premium. I keep getting system error when I try to reduce the room used on my C drive as I only have 28gb of 145gb left. I have tried typing in:vssadmin list shadowstorage For the above command to run you must use elevated privileges:
1.. Click on the Start menu then click All Programs / Accessories
2.. Right Click on the Command Prompt option and from the drop down menu click on the Run as Administrator option
3.. At the command prompt type vssadmin list shadowstorage and Press Enter
(NOTE: if the command does not run change directories to c:windowssystem32) After the vssadmin has executed you will see results similar to the following:.....
The output above shows space used on the C: drive by System Restore is 237.419 MB. The maximum space allocated for System restore is 2.092 GB To view the number of restore points you currently have on your Computer run the following command vssadmin list shadows Next, to reduce the allocated space used by Vista's System Restore, use the following command: vssadmin resize shadowstorage /on=[OnVolumeSpec:] /for=[ForVolumeSpec:] /maxsize=[MaxSizeSpec] Where example: vssadmin resize shadowstorage /On=C: /For=C: /Maxsize=1GB When decreasing the space allocated to System Restore, you will loose the earlier system restore points. The advantage is gaining extra free space. If you are concerned with losing the previous restore points, wait until you do not need them anymore before reducing the allocated space. If you plan on upgrading to Windows Vista or running a clean install and will need extra space, consider reducing the space after installation has completed. It is not recommended to disable System Restore. The capability to restore to a previous point in time or having the new Shadow Copy feature available can be a time saver if something goes wrong or if you delete a file. source: John Barnett Windows Vista Support I keep getting an error message. I seem to remember doing this before with my XP but can't remember how. Is there an easier way?
I've been facing issues with backup / restore / system restore
View 7 Replies View RelatedThe mystery, at least to me, my PC was running almost 2 years. and it was not until about 3 weeks ago that System Restore began to save Restore Points the size of Approx 3 to 4GB daily. Prior to that the Restore Points were well under 1GB. it would be 3 to 6 days before I noticed the loss of 1GB. So why suddenly would the Restore File grew 1 one day from well under 1GB to between 3 to 4GB? That now is the issue I would like to know the answer to. and perhaps that file being saved with each Restore Point is not needed. I mean it wasn't needed for almost 2 years. so I can't think over night it became important but it sure is eating up HDD space.
View 5 Replies View RelatedTrying to restore my system but when I attempt to see the restore points Vista tells me the wizard is already running the this program will close.
View 9 Replies View RelatedI am currently running Vista home on my main PC. I have a router plugged into it. The router is working fine (my son's laptop accesses wirelessly, and I am able to hit the net using a virtual PC that I have set up on it.) However, my main computer is not recognizing the router and is returning an APIPA address when I run ipconfig. I have tried to ping the router but am not able to hit it. I have replaced the cable (even though I do not think that is the issue as I am able to access via the virtual PC). I am unable to restore any connection.
View 9 Replies View RelatedI have had a problem keeping my connection to the Internet. when I connect everything is OK until I want to use my browser and then I lose the connection from my server to the web (dialup connection)I am still connected to my ISP but cannot access anything from the Internet zone,It is shown only that I have a local connection only. I can ping my ISP and Ping the ISP's website. so it seems that I have a DNS misconfiguration, question is what do I start looking for?
Netcomm internal modem IN5920 and have tried a swansmart internal modem and a webexcel external modem with the same results. I can start to download virus defs Etc but will drop the Internet connection as soon as I touch the browser and be just left with a local connection. I have had this problem for over a month and have greatly increased Telstra's Australian coffers
We have a bt homehub router, two pc's connect wirelessly, the wifes laptop and my gaming rig, we live practically nextdoor to the exchange and sync up at 8192kb/s my ip profile is 7000kb/s so i know my connection is sound. she is a facebook fiend and when she is browsing pictures i lag out ingame regulaly, its getting to the point where i cant game if she is on the laptop its like being on a piece of elastic ingame is there any way i can make my pc hog the lions share of the banwidth? Or is it just a case of it being split equally? even if it means me connecting to the router with an ethernet cable.
View 4 Replies View RelatedI remember with WinXP that if I had my computer turned on and was not using it for a certain length of time (maybe 30 minutes), it would 'automatically' create a 'System Checkpoint' in the System Restore area. I could also 'manually' create a 'System Checkpoint.' What I would like to know is - doees Vista (Home Premium) create such an 'automatic' System Checkpoint if I have notebook turned on, but don't use if for about 30 minutes?
(I believe there is a way to turn on an Automatic 'System Checkpoint' that you can schedule to be done at a certain time. That is not what I am talking about. I am talking about an 'automatic' System Checkpoint' that is done if the computer is turned on, but not used for 30 minutes or more (approximately).
Every time I try to run System Restore I get an error message saying that the restore was unsuccessful because of an error. Try again with a different date
View 9 Replies View RelatedIt seems no posible to restore the system from previous "restore points" with Vista Bussines. I always get the message "System restore did not complete succesfully. Details: The writer experienced a transient error (0x800423F3)."
View 7 Replies View RelatedI cannot browse the net, but am definitely online. I have an HP desktop with Vista OS. I have wireless and I know everything is fine with the connection, because I am typing this post off an XP laptop which is using the same modem.
Yesterday the problem began when I uninstalled a DivX player that I dont use. I have read up on this and other sites and can't find a solution. Everytime I try to browse from the desktop I get the HTTP 403 error message. I have tried rebooting, "winsockfix", several command prompts, pinging, the IP address is fine, I am all out of ideas.
Can somebody please point me in the right direction, I have spoken to HP, AT&T and the store I purchased the computer and no dice, anywhere.
My son purchased a laptop for college in August. Recently he installed Unix on it and now he cannot connect to the Internet. How can he reinstall Vista on his machine without having to purchase Vista? His computer came with Vista, so it seems like he should be able to get it somehow. Of course, the quicker he can do this the better.
View 9 Replies View RelatedThis has been an ongoing problem for around 6 mths now and is really getting to me now. Namely the dropping of the internet. I can be merrily surfing the net one minute and then the next if I go to a site I get the message "looking up XXXXX". At this time my taskbar internet icon can be showing the internet connect to be either "local" or "local and internet". Now obviously if local I will lose it but if it's saying "local and internet" why doesn't it work? It will eventually drop back to local everytime. Even though at all times the ADSL line light on my modem/router is showing solid.
The problem is intermittent. I can have best part of a day without trouble, then it may happen lots of times in a short period. To get it back requires reboots of the modem/router and/or reboots of the PC. I have tried 3 different modem/routers all do the same. Now losing patience
After installing Windows Vista Service Pack 1 I lost my internet connection. I kept trying to open various websites in Internet Explorer and eventually I was able to download partial, sometimes even complete web pages, although IE wasn't displaying them, presumably because various resources on the page weren't downloaded yet (I used View Source in the empty browser window to see what it had downloaded up until that point and in most cases it was only half of a web page). Some sites began to work all of the time, such as Google.com, while other sites didn't work at all, like Microsoft.com.
I persisted to keep trying to connect to various web sites, assuming that it was just a major coincidence that my network connection was failing at the same exact time that I installed SP1, but after several hours now I'm still having the same exact problem and some research has turned up that I'm certainly not the only person to experience internet connection issues due to having installed SP1.
I've tried the following:.........
i want to get my connection to go faster is their anything i can do at my system end to increase performace i've already noticed an increased perfomace when using a desktop from a laptop on the same connection so it stands to reason that their might be something else i can do to get it to run faster still.
View 6 Replies View RelatedI am having problems getting a wireless internet connection for a friend who has just bought a new laptop with Windows Vista. He connects through a Netgear, wireless router however the network connection on the laptop shows as local connection ok however there is limited access due to no internet connection. The adapter has a router assigned IP address of 192.168.0.3. The gateway, DNS server and DHCP server address all show the 192.168.0.1. I have connected to the admin console on the router and the router has been assigned a public address and DNS address from the ISP (AOL ADSL).
I disabled encryption and mac authentication incase for some reason this would be causing it but its still the same. He has a desktop PC hard wired to the router and this connects without any problems. The IPConfig of the adapter is much the same as the wireless adapter on the laptop with exception of the IP address which is 192.168.0.2. I can get a connection to the internet if I hard wire the laptop however when connecting wireless it once again gets a local intranet connection but no internet. I can ping the local network and the gateway but nothing beyond the gateway.
I have done the usual things in the way of power cycling the router/modem and disabling/repairing network connections etc. I recall having the same problem around 2 months ago for another friend. They were using a cable modem with an Actiontec router. I did as I did above and even tried 2 different routers with no change. My XP laptop connects fine.
i just installed Windows Vista x64 and immediately ran into network problems. My Network and Sharing center said my connection was connecting/disconnecting every few seconds and I was unable to reach the internet. My network is something like this (ignore the periods, they're there because the field won't format blank spaces :P ) :
Cable modem ---> Linksys SD2005 Switch ---> Wireless router ---> Game systems ........|........ (Netgear WGT624)......|.......+--->Vista 32 Bit PC........+--->Windows XP SP2 PC.....+--->Vista x64 (mine)
I have 4 separate IPs from my ISP so I can RDP into anything not behind the router from work. The wireless is just nice for random evices. All 3 PCs have independent IPs assigned from the ISPs DNS. All systems work fine except the x64.I thought it was my on-board NIC so I went and bought a PCI NIC. It did the same thing. At this point I think I might have 2 bad NICs so i went and got a third - same thing. I read around on some forums and tweaked my duplex settings which stopped the connect/disconnect, but then I got something like this in my Network and Sharing Center:x64 ===>green===>Unidentified Network===> X ===> Internet,Changing the duplex settings around did not resolve this.Next, I followed a Microsoft fix and changed a setting in my registry that did something about disabling a packet broadcast Vista does that some devices cannot respond to. Still no go.After pulling what's left of my hair out I slept on it and plugged my x64 system into the router.
Disco! It worked. However, because of the physical locations of each system this is messy and cannot remain in place. (Aside from that I want to resolve this issue because I think it is dumb :/ )So my question is - why can't my Vista x64 system get an IP via DHCP from the ISPs DNS? Is there something I need to turn off/kill that I haven't hit yet? When it is getting it from the router it seems happy as a clam but through the switch is no-go. (gives that nasty 169.... (preferred) address). I used mostly XP before and it looks like Vista is trying to connect to some local network and self-assign its IP. How can I make it stop (without asking my ISP for a static IP, cause they prolly won't give it to me w/o mucho $$)?
In January I bought a Dell Dimension E551(2.60 GHz AMD Athlon 64 X2 Dual Core Processor 320 gig hard drive). This came with XP installed and a free Vista Home Premium upgrade when it became available. It was after installing this that my troubles began.
1. I discovered that my M-audio delta sound card is not yet compatible with Vista. Obviously I should have checked this out before install, but as a non-techie I naively assumed Microsoft would have issues like this covered before releasing their OS. Also, Dell supplied an additional disc with Vista which supposedly checks for conflicts before upgrade, but nothing came up about the sound card, hence I presumed it would work. I since moved the card to my other computer but I am now left with an m-audio control panel which I am unable to install (does not appear on add/remove program list).
2. My broadband Internet connection has failed. It worked for a few weeks, then became unreliable and now can't get online at all. My ISP (tiscali) claim it should work with their service, but none of their staff have been trained in Vista and can’t advise. I did eventually manage to get online by installing Virtual PC and running XP on that, so obviously it’s a Vista conflict somewhere and not the connection or hardware.
3. Windows Explorer seems to dislike certain files and will often crash and restart when attempting to access these files. Example: I created a folder and moved a zipped file into it (which was working fine from the desktop). Clicking on this file now instantly causes windows explorer to crash. I cannot now move or delete this file.
Been running Vista x64 for a while with no problems at all ( yes...honestly!!! ) with a Quad Core and 4Gb ram and an internet connection that was as good as I was expecting. A few months back, though, things went downhill very suddenly! Now, it takes 20 minutes plus just to open some websites, and download speeds have dropped to virtually nothing. I am talking dialup speeds on a 2Mb line. Model is a Belkin wireless router, but I am connected to it by cable since the PC is right by the phone line. I have 2 other PC's in the house ( both running XP wirelessly ) One is temporarily offline due to other issues... but the other is connecting normally with no speed problems. I have done the 'google' thing, and disabled the auto-tuning facility, with no noticable improvements............................
View 6 Replies View Related