Windows Update downloaded Vista sp1 and appeared to be installing it successfully. However at the end of the process the screen froze on a line showing this series of numbers: !! OXC190036 !! 4089/66075 (RESCINST.DLL)
I had to cut the power to turn the computer off and have been unable to boot up. Every attempt to boot fails and ends with the same line.
I tried to install vista service pack it froze at 18% for 4 hours so i used my recovery disc to no avail anyways here s the real problem i bought my pc from PC world i am in the uk by the way it came with xp media centre but when i bought it i got a free up grade to vista home premium after a long wait the discs for vista arrived and i installed the program with no problems but since i tried the service pack it has all gone wrong i ended up having to reinstall xp with my recovery disc then put vista back in when i done this it asked for an activation key but i never ever got one as the first time i installed it.
View 9 Replies View RelatedI have numerous problems installing service pack 1 on my Dell Laptop running Vista Home Premium. I succeded in installing it first time, but when I next ran windows update and rebooted, after the logon screen I just got a black screen with the mouse pointer and nothing else. I restored from an image, did all the updates, then installed the SP1 - same problem. Now I restored image, and applied SP1 (without running windows update first) and have the same problem. No problems on my home built desktop, just the laptop. Really pissed with Vista just now.
View 8 Replies View RelatedI have a vista HP set to recive auto update .This morning it shows to update XML core service 4.0 service pack 2 (KB936181) I did the update and few second later it shows the same update I did this 3 times and restarted the computer and it is still shows to update the same thing over and over.
View 9 Replies View RelatedFirst switch on, got to Welcome screen and froze, restarted now all it does is Start Case fan and CPU fan after 2-3 seconds, runs for 10 seconds and switches off, then restarts and keeps going through same procedure, over and over. On motherboard is a row of 6 LED's showing CPU loading, all six lit each time it starts? I've a horrible feeling the CPU is kaput.
View 6 Replies View RelatedMy step father has a Window Vista Home Premium 32Bit on a HP Pavillion DV 9000 Laptop His screen had froze so he did a hard shut down on it and when he tried to load it back up it would go through the green bar for about 5 to ten minutes then it would freeze at a black screen and the way i know its frozen is that the little light that tells you the computer is thinking is permanently on. HP did not send us any disks with this laptop so recovery through disk isnt possible,
I downloaded an ISO image of a WinRE about a month ago when we had problems with a virus and i had to do a system restore and i tried to boot from disk with that and it did the same thing as when booting normally. Is it possible there is a file in the System32 file that got corrupted or deleted and if so is there a way of finding out which file and is it fixable if i can access the hard drive and hook it up to a working computer? I have a case that can make a laptop hard drive into an external one to access from a desktop.
A friend has an Acer Desktop with Vista. It was installing the latest Windows updates, and 'hung / froze' ( her words ) Now, when it starts, it displays the BIOS screen? Obviously some sort of major problem? I was going to try the Recovery Console first?
View 5 Replies View RelatedI am consistently being plagued with problems in my Host Process for Windows Service and from two different sources in the Wdi Service Host. These are all the source for constant ongoing and automatic reporting to MS.
For the Wdi Service problems, if I manually check for solutions to these, the same old "No new solutions......
When installing service pack 2, I get to the "Please read the license terms". The "Next" key at the bottom is not available for selecting ... it is grayed out. All I can do from this point is select cancel. I downloaded Windows6.0-KB948465-X64.exe. I have a 64-bit computer and am running Windows Vista Home Premium Version 6.0 (Build 6001: Service Park 1)
View 9 Replies View RelatedWindows asked me to update to Service Pack 2 ( I have Vista Home Basic 32 bit). After the update, I cannot start my pc anymore. I always end up in a black screen with these texts
!0xc0190002!3937/47219 (Mahjong.exe)
1.Started Start Up repair - did not work. Froze at some point,Safe Mode - I still couldn't get in. It froze on "Loading Windows Files"
I was wondering if I had the correct Service Packs. Under Windows Updates I can see them all going back to when I bought it. It shows 1 service pack update, KB948465 on 9/19/09. It does not show a 2nd. Under Windows Edition in my System (Control Panel) it shows Windows Home Premium and Service Pack 2.
View 4 Replies View RelatedI may have missed something but I thought that MS would be releasing it to the masses in March. I keep looking at MS Download page and running Windows Update and hile there are "tips" on downloading, I can't find the file.
View 9 Replies View RelatedI'm a Vista and IE user, not a Developer. Sequence of events:
last week... downloaded Vista Service Pack 1
this week... IE8 has stopped working... screen goes white... DEP
problem (blocks code execution) or DEP/NX No-Execute Memory
Protection.....................
I had a working VPN connection with Windows Vista, my computer encountered an error and the resolution was to upgrade to Service Pack 1. I did and now my VPN connection does not work. I can bring a laptop home from work (Windows XP) and it will connect. Anyone have any ideas? I have gone into the properties to make sure the settings did not get changed.
View 9 Replies View RelatedI have recently installed SP1 to my Vista X64 machine (dual core 6700 o/c to 3ghz, 8 gb ram, raptor 10K 74gb system harddrive, raptor 10K 150gb large file and partitioned PS scratch disk, 340 gb 'everthing else' harddrive, nvidia 8800 640mb gts videocard, wacom A3 wide table) and I have noticed really strange behaviour in PS CS3. It generally feels slower and when I work on larger files (183x120cm @300dpi) it's much slower than pre-sp1 on the same file size.
The odd thing I have noticed is that it crashes (fades to white - not responding ) when I use the transform scale tool and when I add a Layer blending effect ( drop shadow / gradient etc ) it never did this before as it used to render it instantly.....now it takes a least 30 sec to 1 min to create and/or recover from the 'not responding' white out screen. Has anyone else found this with PS CS3 and Vista SP1? - It's very annoying especially as I had the system perfect before the SP1 upgrade. How can I fix this?
I have a Genuine version of Windows Vista on my system. Four times now I have tried to install SP3 with failure each time. It will go through the complete installation process with the 3 stages upon restart and shows success on all three of those stages but comes back saying that the upgrade did not take and my system is reverting and changes that were made during the install. My system ill run normal afterwards.
View 9 Replies View RelatedAfter being prompted that new Windows updates are available, I have attempted twice to install Service Pack 2 but get the error message" Service Pack did not install. Reverting changes. Do not turn off your computer." I already have SP1 installed on my HP Pavillion 32 bit OS with Windows Vista Home Premium. Please advise if this is a known problem and a possible fix.
View 9 Replies View RelatedThe problem I ran into was that after installing Service Pack 2, some kind of error or glitch started occurring. What happens is that I restarted the computer after the install, and when Vista boots to the desktop, only about 5 icons in the tray would show when usually there are 10-12 that display. So I then tried opening Internet Explorer and you see the hourglass symbol show next to the cursor showing that it is working, but then it disappears and nothing displays. No window shows for IE. I tried launching other programs and the same problem occurs. No windows would display, but in the Task Manager, I see the processes running.
So I figure the issue is related to Service Pack upgrade, so I restored to the point before the Service Pack 2 upgrade. Everything worked fine. So I tested the computer after a restart again and again the non-window launching error occurs.
I stumbled acorss some proccessing issues with CA Security software that would hog some memory, but I am unsure that it is the reason for this error. Could it be that the Service Pack may have installed improperly, thus, creating some kind of window error? Or do you think it could be related to some preinstalled program having incompatibility with the Service Pack?
I have contacted Microsoft support and they suggested resetting IE, but I don't think that is the solution. I haven't tried it yet. I sent them a HiJackThis log and they reported no problems with it. No viruses or issues to report from a Malwarebytes scan either.
Has anyone installed SP1 for Vista on a PC with MacAfee security suite? I turned off all of my non-microsoft services and attempted a 3rd install and it still did not install. Microsoft told me to completley un-install MacAfee and then try to intall SP1 again. My question is, if anyone has done this; will it work? I hate to waste another 3 hours doing an install and revert.
View 7 Replies View RelatedIf I'm not having any problems with Vista do I need to install the new service pack? My computer came with it preinstalled and I have no CD or backup. I've tried several times to install it but keep getting error 8007371C. I went to the manufacture and they said I need to do what sounds to me like to a destructive recovery then install SP1. I see where a lot of people are having problems with the new service pack. I guess what I'm asking is will I be buying myself a headache if I install it?
View 5 Replies View RelatedReason for wanting to install service pack 1 : The Problem: My windows Update tells me there are no more important updates only optional ones. I checked the optional updates and there is nothing in there that has to do with service pack 1. So i downloaded "Windows6.0-KB936330-X86-wave0.exe" that installs service pack 1 Execute it and it starts out all fine as if it was working. After a while this shows up. I've Checked with the microsoft site and tried closing programs, restarting then running it as soon vista starts, but nothing.
View 5 Replies View Relatedi'm new to vista and i want to check if my computer has SP1, how do i do that? and if it doesn't have SP1, what is the best way to go about getting it?
View 8 Replies View Relatedwhen i enter my computers properties, it says: Windows 7 Professional Service Pack 3, ok so wait service pack 1 wont come out till 2010 may, and here it says i have sp 3
View 6 Replies View Relatedrecently my windows vista had an update of the service pack, n this happens. when i clicked the window color and preference and sounds, it only pop out the appearance window while it suppose to go to this page below. and even more i cant open my games.. is it all this got to do with the graphic card? btw im missing the Windows Vista Standard option in the first screenshot
View 5 Replies View RelatedI've tried five times to install SP2, but still get the error message"Service Pack did not install.Reverting changes. Do not turn off your computer." I've tried to install SP 2 with the downloaded package in addition to Windows Update and also downloaded the cleanup tool. I've disabled my Norton antivirus program and still SP2 will not install. I already have SP1 installed on my HP Pavillion 32 bit OS with Windows Vista Home Premium. Do I really need to install SP2.
View 4 Replies View RelatedI am running vista home premium and i have downloaded the service pack 2 download from the download centre. When i try to install it it tells me the following 'you must install windows vista service pack 1 before continuing' i definately have pack 1 installed already but to make sure i tried to install it again and it said already installed.
View 4 Replies View RelatedI had two failed SP1 installs; got to 100% then said "Service Pack did not install. reverting changes" - that was from Windows Update, second attempt was from a manual download of the all languages file (the failure message was slightly different - it was "Updates were not configured correctly. Reverting changes".) OK so far. Now update says I should have KB938371 (which MS say fixes SP1 install problems). I click ok and it reboots and hey presto - Vista suicide! PC won't boot. The problem was a missing winload.exe with error 0x00000f (IIRC). Luckily I have Linux installed (bless Linus Torvalds), so I download your iso, boot that and try the repair function. Doesn't work - says "Disk corrupt". Also no copy of Vista is found so can't go back to a restore point (probably because one of my Linux partitions is the active one which runs a boot manager). After a few attempts with this and that I try this, and it works. Open a dos command prompt and type copy x:windowssystem32Bootwinload.exe c:windowssystem32winload.exe Corrupt disk, eh? And now my vista works fine, although it still don't have KB938371 (haven't tried it again yet) and SP1 is not installed. What a mess. M$ one of the richest companies on the planet, should be ashamed of this.
View 7 Replies View RelatedI wonder why my Windows Vista Business is showing Servive Pack 3 as I only installed SP1 last year?
View 6 Replies View RelatedI have come across two computers in my family that fail to update to Vista SP2 with totally different error codes, and leading to different discussions on the community forums. One is a desktop and the other is a new Dell laptop. The latter gets error code 80070490. Wow this Microsoft quality control reminds me of the constant bugs I had when I was using Windows 3.0 back in the early 1990s, or the first Windows 95 release. I hope it's better in Windows 7!
View 9 Replies View RelatedI am having certain problem upgrading my Vista. About two years ago I bought Windows Vista Ultimate x32 disc to upgrade my older laptop. However, back then... Well, Vista was far from perfect back then, no SP1... So I put it in a drawer. Now I bought a new HP laptop, boasting Vista Home Premium SP1. Thanks to Service Pack 1, Vista finally reached the level I can use it, so I thought of upgrading Vista to Ultimate. Unfortunately, the Setup would not allow me to upgrade, saying the version on the laptop is newer than the DVD installation (laptop has SP1, DVD not). Now, question, what should I do? Was buying Ultimate just a waste of money? How do I go about upgrading it now? I tried to see if I can uninstall Service Pack 1, however, the OS came with SP1 built-in, thus I cannot uninstall it.
View 9 Replies View RelatedVista Service pack 2 won't install on hubbies laptop. (Vista Home Premium 32-bit) I have tried 3 times, rebooting after each attempt. An error pops up saying: "C:Windowssystem32sqmapi.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system Administrator or Software Vendor for support." The error code is C0000020 and on the heading bar is says "SPCLITE.EXE - Bad Image. We have no idea what program or what .dll it is talking about. I am running Malwarebytes on his computer at the moment to see if anything comes up regarding that.
View 9 Replies View Related