during install of Vista ultimate to new system with 2 x 750GB Sata HDD..I partitioned 100GB of the first disk (0) to take the Vista system. Windows asked where to put the installation and I highlighted the new partition but then it indicated it needed space to put what I thought it said was the System Volume? and that there was enough space on the disk 1...now I thought it meant partition 1 and highlighted that and clicked yes in the dialogue window...after the install I saw that it had placed a file of 8kb namely BOOTSECT.BAK onto the second HDD.
In disk management disks show as c: Simple Basic NTFS Healthy (Boot,Page File, Crash Dump, Primary partition) and the second disk as D: simple Basic NTFS Healthy (System, Active,Primary Partition)....Also Both disks show total storage as 698GB each ? Whats going on and can I do anything other than a new install ? If a new install is needed (I havent activated vista yet) what should i do second time around.
I have The Sims 2, I always use to play it, but my other laptop broke and I got this one and I tried installing the sims 2! But it stops on disc 1, 18%! Unless I eject and click retry it loads up 1% I kept doing that once and when it finally hit 100% it did nothing and went off for some reason!
I have a new HP Touchscreen with 4 megs of ram, dual core, and windows vista 64. I load call of duty and it loads but will not run and says their is a missing dll file. from direct x. Obviously Windows vista 64 has direct x 10, and COD4 runs from Direct x 9. When I go to install direct x 9 it says that I cannot install due to another application of direct x running.
Okay I'm sure other people have had this problem also if they are constantly opening new windows while trying to work in the current one. It finally pissed me off to the point of posting for an answer to this problem. First of all I hate tabbed browsing cuz I like the benefits that come with just opening a new window to browse in- alt+tabbing, being able to use them side by side or whatever else.
But anyways so I'll be browsing online in one window, maybe filling out some form and then for whatever reason I'll need to open a second window so I'll open it and quickly click back into the window I was filling stuff out in, but the new window that I opened will pop up on top of the current window I'm using (filling out a form in) after it's done loading, causing me to have to minimize it/click back into the window I was using. Sometimes I'll only have to click on the current window once to stay in it when the new window loads, but other times I'll have to click maybe 3 times because the stupid new window hasn't finished loading and keeps popping up on top of the current one I'm using.
Has anybody else seen a case where a program (Germin Topo USA) loads fine from a DVD with XP but simply does nothing when you click setup on Vista. Just get the continuous mouse delay cursor. I tried networking from the XP drive, no luck. Tried the Vista "Program Compatibility Wizard" as XP or Win2000, also nothing. I would have chalked it up to the program/DVD if it was not for the fact that yesterday I had another program not install. Is it possible some setting on my Vista has changed. Running as Admin/ Vista Business. No other bugs.
The problem started when I decided to do a reboot after installing some programs. Since then whenever I log on it takes ages displaying the "welcome" message, then comes up with the dreaded "preparing your desktop" message. It then loads a "temporary user profile" and says that any changes made while logged on to this profile will be lost afterwards, and to check the event log or contact the network administrator.
I've read heaps about this problem happening to people with vista and windows 7 (I have vista home ed). It's supposed to be due to a corrupted profile, and so if you delete the profile in the "regedit" thing it's supposed to fix itself. Others have also suggested creating a new account and transferring everything. I have tried countless restarts, restoring the system, deleting the user profile (all my stuff is now fully backed up) and creating new accounts. None of it works - a temporary profile still loads from a newly created account, the same happens even in safe mode and from the built in administrator account. I'm at a total loss as to what to do!! I use my computer every day for work so you can hopefully imagine how frustrating this is!
I've just gotten an Acer Aspire 6920, which came with Windows Vista SP1 preinstalled (Beforehand, let me just say I normally use Linux, the only reason I want to keep this operating system is because there MIGHT be some programs that don't have native replacements, or run in wine that I may need at university - Without that,, I wouldn't even bother with Windows, apologies to Microsoft.)
After the usual "Hey there, you bought an Acer, let us preinstall about 50 programs, and let you reboot 6 times in the process", I was up and running (Well, after another reboot for updates that is.) - All went well for a day or so, no problems, starting up went fine for a few times. Then, suddenly, without anything from my part, the system refused to boot. It went through the BIOS fine, and showed the little blinking underscore (So, nothing in Windows yet, all BIOS) - Then it restarted, went through the BIOS, showed it's pretty underscore, rebooted, etc. etc. No error given anywhere during the process. Pressing F12 (Windows bootloader screen) did nothing, it'd just reboot before something could do anything.
I installed Ubuntu on the thing (Which, for the record, works absolutely brilliant.) - And allowed it to overwrite the MBR with GRUB. GRUB can boot into Ubuntu no-problem, and has detected Vista in the correct partition (SDA2) - It allowed me to choose it from it's list, after which the system instantly rebooted to BIOS->GRUB, and back to the selection list.
I've checked through other threads and I'm not sure if any one else has this same issue. I suspect the problem comes from a Windows Update. I'm not sure how to reload an update and I'd rather not uninstall and delete and reinstall and change things when I'm not exactly sure what I'm doing. Everything else works fine. Web surfing is smooth, there isn't any problems loading programs ever since I restored factory setting from Gateway, because of the same issue. I had to restore from the hard drive because the disc (Windows Vista Home Premium 32-bit SP1) refused to work. I think that's because somehow my computer isn't 32-bit, its 64-bit. Then after going through setup and all the updates, SAME ISSUE!
It could be Media Player, Internet Explorer, or Adobe Flash. I get the feeling its a corrupt update, or one of those programs isn't compatible with Vista 64-bit. Those programs load (Adobe not so well) and I didn't put them there or upgrade them, Windows Update keeps on top of that. Also, this problem may have been there awhile, or just started. I know I just started to notice it. Then I checked with an older version of Windows on a different computer and yeah, that movie trailer loaded and played like mine used to. So I'm almost positive its my system not the website.
My video card is nVidia GeForce 9600M GT. Everything was fine and I loved it but within one month, the screen on the laptop and monitor would load sideways or upside down whenever it felt like it. Only happened at startup, never while I was working. And it didn't happen all the time. Kept happening for another month so I called HP. Spent hours and hours with HP on the phone. Uninstalled and reinstalled latest nvidia drivers a few times, updated bios etc. Tried using the crtl-alt hot keys with arrows but it does nothing. Occasionally, I am able to rotate the screen by opening the GeForce manager but that doesn't always work. Even if it does work, the screen loads sidesway or upside down even after I do that fix. On one or two occasions, disconnecting the monitor from the laptop fixed it but sometimes it stays stuck.
HP now tells me they think Vista (all versions and particularly 64 bit) has problems with the driver for the monitor. No updates available and not HPs problem!!! I can't count their theory but am hoping they are wrong. Did some research on the Windows website site in the compatability center and can't find the 9600M GT listed on either the "yes compatible" or "not compatible" lists for Vista 64 or 32 bit......
Got a new laptop for xmas and decided to install cs 1.6 after a very long time. But now when connecting to a server it loads two bars and crashes and becomes un responsive.
I used a 'registry cleaner' yesterday and it wiped loads of programmes off my computer. I got them all back except Windows Vista Spider Solitaire. I'm not bothered about the other games too much. Tried all the usual avenues of help (turn windows features on/off etc) but none helped. Could someone tell where to look for a download site or possibly email me a copy? I'm using Vista Home Basic 32bit.
I was running a 8800GT 512mb, and I had loads of problems with it. So I got a nice new ATI 4870 1GB, wacked it in and now have driver issues up the arse. I formatted my hard drive made it nice and clean, reinstalled the driver played a game for a bit then....... the display driver stopped working! Im sure I have fitted it correctly with the right power suplier
The driver version is 8.671.0.0 [reading that from the device manager properties] Maybe im missing some sort of driver or something. So right now and about to throw this out the ****ing window and buy a nice easy consol for 1/3 of the ****ing price and no ****ing hastle.
I got Vista Ultimate 64 last week and once I tried running Battle for Middle-Earth on it, I get debugs before the game fully loads up. I have no idea on how to stop this and it's driving me insane! I've played the game for 3 years now and I'm staff for the game on another website, I really don't want to stop because of this.
I am running MS Word 2000 with Vista Home Basic. When I click on the icon to load the program it loads but then immediately terminates. I've also tried right clicking and loading as administrator but no deal.
Recently I've noticed that when I right click on certain files or the desktop, that it would load the context menu after about 1 second. I know this isn't much but it should not take that long for something that small. I went ahead and removed many items from the context menu and the desktop and all other files load the context menu almost instantly. My problem is that .exe files still take 1-2 seconds to load their context menu. I tried removing almost ALL the options in the context menu.
I am about to install Vista64 home premium on a new build with 8 megs of RAM. The disk is Vista64 SP1. I was wondering if it is still recommended to install Vista64 with only 1 stick of RAM first prior to installing all 8 megs? Or because the disk has SP1, is this no longer an issue?
I would like to check the memory for errors BEFORE I load/install Windows Vista Home Premium x64 to avoid install hang-ups. Can you make an ISO CD of this program, load it in your CD/DVD drive and check your memory for errors? I recently updated the BIOS on the board (DP35DP) and it does show all of the 4GB of Kingston ValueRam PC800 1.8v (2x2gb) installed. I have good reason to believe that it's from a respectable manufacturer. Just want to make sure the memory is good before I load up the OS.
I am helping a friend install windows updates on her Sony VAIO laptop with Vista Home Premium SP1 installed. Laptop had not been updated since January 2009. All updates completed fine with the exception of KB973565. When installed via automatic windows updates I get the following error...........
I'm assuming a clean install with an upgrade license will be identical to a clean install with a 'full' copy, except that at some point during the process, it will ask for my key for Windows XP? I just want to confirm this is the case before I go buy an upgrade copy. one last question to tack on here - if I have a desktop and a laptop computer will it let me install the same copy and license key of Vista on both? I know some MS products in the past have allowed you to install on more than one computer because they realize a lot of people have more than one computer but they only work with one at a given time.
I've tried numerous times to Install Vista Sp1, but without success. The install appers to go well, reaching 100% at stage 3, but then the screen reports the SP did not successfully install, and proceeds to roll back. On Checking the message in Windows Update, the install failed with error 80004005. I've raised the issue directly with MS, but the advice to install the SP in Safe mode has not helped. I've also trawled various forums and cannot find any reference to the specific error code.
I own a Sony Vaio VGN-FZ1. A number of forums seem to suggest it might be a hardware issue, and I have tried disabling / uninstalling various devices to see if this helps, but this also has not got me any further. Has anyone else experienced this? Does anyone know what this error code means? Is there a way to force the SP to install despite this error code (it does get to 100% at stage 3 after all, so maybe it does install, but one of the packages check routines is picking up an error which doesn't really exist???)
I am using Win Vista, 32bit. I have a upgrade disc to vista 32bit. Can I possibly use that to re-install my OS. I have a virus Or I want Win 7 too, so can i upgrade to that by paying less? If not i will stick with vista.
i will be upgrading my Dell desktop from XP Pro to Vista Ultimate in the coming days and i need some opinions. I've never upgraded OS's before but i do understand the difference between a clean install and an in-place install. My question: what would you do and why would you chose one over the other?
I try to install a file. I get the "the admin has set policys to prevent this install" I am the admin. What do I do? Also it's a installer package so I can't click "run as admin"
I could do a repair install, install new motherboard drivers and possibly have to validate all over again the same as you always did with XP but no good. I cannot get into Windows at all so cant run repair from WITHIN windows and no option from the boot DVD works. So, do you have to lose everything each time you upgrade hardware or some part of it dies meaning you are forced to upgrade hardware?
I installed from Vista Business pre SP1 and installed SP1 before the motherboard died.
I have just joined after finding this forum. What a brilliant site. My question is I have a 32 bit vista home premium upgrade disk and was reading about how do do a clean install. Can I do a clean install using this disk and then use my key to upgrade to the 64 bit version.
I need to do a fresh install of Windows vista home premium on my laptop that I am renting from a company. However, they didn't give me an install disc or recovery disc when they rented out the lap top to me. Is there a way to do this with out the discs?
I have hp laptop with Vista Home Premium (OEM) installed. I've made Recovery Disks using the Recover Manager. I wish to have a clean install of Vista instead of using the Recovery Disks. I've read previous threads but I have to say I am only getting more confused.
- Can I perform clean install of my Vista OEM? - Can I use any copy of Vista OEM cd and use the Product Key sticked behind my laptop?.........
My laptop has a two HD's on board. I was thinking of replacing my larger D drive where I store data with the original smaller HD that came with and using that to install Vista. If I do that I can still access my data with a USB connection. Seems like the perfect solution! Does this then give me dual boot options? Will my programs installed on the XP drive work with Vista or do I have to install them again on the Vista drive? Even if I have to install them on the Vista drive it seems like I could go at it slowly as time allows and continue using XP until it's all up and running well. Does that make sense or am I missing something? I keep good backups but I like having the XP drive intact in case I missed something. Lots of senior moments these days! If this is good, will I be able to eventually just swap my Vista drive into the first postion where the XP drive is now? Or is there and another way to move or it to the C position?
