Find What Firewall Issue Is On A Printer?
Mar 30, 2010
I was having problems reinstalling HP software for my All-In-One printer,
and HP Tech support had me add ten or fifteen programs to the Firewall as
allowed programs, plus about that many ports. I'm still having firewall
issues according to the HP networks diagnostic tool, and the HP software
does not "see" my printer on the network.
I can go to its IP address in Internet Explorer and see info about its
status, etc, and I can install basic drivers for other similar printers and
it will print, but not from the Full Software package that I need for OCR
scanning. It is listed under Printers and I can print a test page.
The HP Diagnostics has a AutoFix button but it doesn't fix the issue, and
doesn't say what is wrong. Until I had problem reinstalling the software it
had worked fine for two years.
How can I find out what the firewall issue is?
View 9 Replies
ADVERTISEMENT
Jun 10, 2008
I have a Vista Home Premium Laptop, an XP Home laptop and an XP Home desktop (and an XBox 360) connected to my Linksys wireless G router and an XP Home desktop connected via CAT5 to the same router. All connect to the internet fine. The XP laptop finds and uses the printer on the desktop fine. I had setup a share of the Canon I560 printer, connected to my XP desktop, on the Vista laptop and it worked fine. I don't believe I made any changes, but now it won't find the printer and I can't seem to install a new copy.
The Vista machine will not detect the printer and won't even find the XP desktop or laptop on the network. The XP machines find each other fine. All machines get their IP address from the router via DHCP. All are in the same workgroup, or it seems so. Strangely the Vista machine shows WORKGROUP and the XP machines show Workgroup, even if I type the name in caps, XP still shows Workgroup and Vista WORKGROUP.............
View 6 Replies
View Related
Sep 9, 2009
Is there any way for a blind person, using only a keyboard and a screen reader (Jaws), to find out if her printer has been turned off (or on)? Using Windows Vista Home Basic.
View 7 Replies
View Related
Jun 26, 2009
I installed a Lexmark 6200 printer on a Acer Laptop runing Vista Home Premium. The installation took a long time but went to completion. I used the Lexmark disk for the install. The 6200 displays on the Control Panel screen as "Ready." I made it the default. The printer is pluged into one of the USB ports.
The problem: nothing prints. I sometimes get in an error message - can't find printer. But typically, when I do File>Print nothing prints. I have tried using Works, NotePad and Open Office Writer with the same results.
View 6 Replies
View Related
Mar 23, 2008
Presently, Vista is the only system that can't find my printer on the network. All my other OS is Windows XP. Have a Linksys router with a Canon printer. Why can it not find my printer on the newtwork??
View 4 Replies
View Related
May 19, 2008
I am using Vista ultimate with a new Canon LBP2900I laser printer. If I print with the windows firewall turned on it takes an age ti get a print out, if I turn off the firewall it prints stright away. All the drivers are up to date. In the firewall exceptions the printer is listed and ticked
View 9 Replies
View Related
Apr 21, 2009
Windows Vista Basic sp1. Im using a 3rd party firewall program. In Administrative Tools---Services it shows Windows Firewall status as Started. But, in Security Center it shows my 3rd party firewall being On but Windows Firewall being off. Also, in Administrative Tools---Windows Firewall with Advanced Security is showing Windows Firewall being on in Domain Profile. Is this normal? Why would one show Windows Firewall as On and another show it as Off?
View 9 Replies
View Related
Jul 29, 2009
I?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
View 9 Replies
View Related
Jun 15, 2008
I have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
View 6 Replies
View Related
Mar 23, 2008
Dose anyone knows if they make a printer cable: I received a new lab top and it didn't come with the older printer jack on the computer. I guess I need to use one of the usb ports? My Epson 660 still works I hate the idea of getting a new printer when my old one works.
View 4 Replies
View Related
Apr 16, 2008
My firewall gives me this error message when i try to set it on. "Windows cannot start the Windows Firewall service." I have just installed SP1 but the problem started before that.
View 9 Replies
View Related
Jun 1, 2009
Just installed Vista SP2. Everything seems to work OK except for my Dell 1720 printer. It now prints an extra page before the actual document to be printed. There are just a few spurious characters printed at the top of this unwanted page. The following "proper" pages are OK. I have, so it seems, the lastest driver available.
View 7 Replies
View Related
Jun 17, 2008
I cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
View 4 Replies
View Related
Jun 22, 2008
i have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
View 7 Replies
View Related
Apr 10, 2009
I just upgraded my XP home edition to Vista home premium with an upgrade disk provided by Dell. Before the upgrade I uninstalled my HP 2575 printer and software because it was listed as a compatibility issue. After upgrade I reinstalled new software from HP for my printer from the HP website. I plugged in the USB cable from my printer. Vista recognized the new device but would not put it in the printer folder in the control panel. Vista did find driver software online but could not install it. The HP solution center tells me no HP devices have been detected. When I try to print I get a message that I don’t have a printer hooked up. That’s the back ground here is what I have done.
I have updated Vista; most were successful some security ones failed. I have Service pack 1 I uninstalled and reinstalled HP software many times I started my spooler and reinstalled printer and software many times. I checked Task Manager and the hpqste08 services are running. I uninstalled virus protection and turned off the firewall. I have done everything I can find at HP, Microsoft and here. I tried to reload Vista but got a Worker Thread Returned at Bad IRQL error message so I stopped reload.
The one odd thing I did find was in the Device Manager. In the Device Manager the HP 2575 is listed twice. Once under IEEE 1284.4 compatible printer and once under Other Devices. When I click on the one under IEEE 1284.4 compatible printer and update driver software it finds the driver and says it’s up to date. When I do the same on the one under Other Devices, windows finds the software for this device but encountered an error when trying to install it. It does this when looking online and when looking in C: drive.The printer still does not show up in the printer folder in the control panel.
View 7 Replies
View Related
Jun 10, 2008
I have a Vista Desktop that has a wireless router. I have shared a printer, but I would like my Mac laptop to be able to print to it. Do I install the printer driver on the Mac or on the Vista machine? If I install on the Vista machine, is there a special installer? The printer is an HP DeskJet 2445.
View 4 Replies
View Related
Nov 21, 2008
I have a HP Color Laser Jet 3600n already installed on the company network. I just got a new gateway with Windows Vista Home Premium 32bit. When i go to the printer wizard it locates the 3600 printer on the network. Then it asks me to choose the printer software from a list. or choose a disk. I don't have the disk. So, looking through this list, it doesn't even have the HP Color Laser Jet 3600 in there. it's got a 3000 and then jumps to 7000.
View 9 Replies
View Related
Oct 8, 2009
i have a printer on my old windows xp computer. but i went to hook it up to my vista, obviously the printer is not compatible which sucks. so is there a way i can connect it through a network? i have no idea where to start or what to do first.
View 4 Replies
View Related
Mar 23, 2008
I have a simple text file with a certain word in it. I try to find this text file, but vista won't find it. Windows 2000, linked by network, finds it within a second.
I have tried all available options.
"include non-indexed"
"always search file names and contents"
"find partial matches"
"include subfolders"
etc
etc
It just doesn't work. Why is there not a simple search function that actually works like in windows2000? I am using Vista Ultimate 64 bit. But not having a working search function doesn't look that "ultimate" to me.
View 9 Replies
View Related
Jun 15, 2009
I'm using Vista Home Premium - I generally use Outlook 2007 for my e-mail and organising but recently went to Windows Mail to find a Newsgroup (unavailable in Outlook). However, no Newgroups were visible. Unable to find a way to find them I clicked on "Help" and the advice includes "Click the Tools menu, and then click Newsgroups." However, there is no "Newsgroups" option in the Tools menu that displays. The Windows Mail I have is version 6.0.6000....
View 9 Replies
View Related
May 7, 2008
I'm trying to install my Printer Driver for Canon Pixma printer. When I run the executable to install the driver, it come back with "Printer Spooler is not running, Restart Printer Spooler. So I re-start Printer Spooler under Admin. Tools. Then I try to run the executable again. And again the Printer Spooler is stopped. It seems the executable stops the Printer Spooler?
View 5 Replies
View Related
Aug 11, 2009
I have Vista 32 Home Premium and its an Laptop. And Im using Nod32 as Antivirus protection, but I thought that I maybe should buy a firewall also? Cuz Im using Windows Firewall, (the one in Control panel) but I dont really know if it is really enough, cuz Im using a router with out wires. Ps: On my other computer I tried Outpost once, and it totally screwed my internet, we had to buy some hardware thing into the computer and pay a guy to do that, so maybe not Outpost
View 6 Replies
View Related
Nov 25, 2007
not sure if any of you have seen this. but comodo free firewall is now out for vista 32 bit and 64 bit OS. Comodo ™ Free Firewall Software Download
View 9 Replies
View Related
Aug 7, 2009
OS Vista Ultimate SP2
Firewall Zone Alarm 8.0.298.000 free edition
I have random slow bootups that I have traced to the Zone Alarm file VSMON.EXE I would like to replace Zone Alarm with another Firewall.
View 9 Replies
View Related
Mar 23, 2008
I check my firewall options, the firewall is 'off' and in red. I continue to turn it back on, but when I check it again later; it is off again. Could this be a virus, something serious? or is it a setting that I need to change?
View 9 Replies
View Related
May 7, 2008
I'm really at the end of my tether with this issue - have a laptop which has windows Vista installed. Whenever I boot up the Windows Firewall is turned on. However, towards the end of the boot process, the Windows Firewall turns itself off, almost as if when a program loads it knocks it out. Is there anyway I can do a walk thru' of the boot up process so I can see if I can capture which program or process is doing it? At my wits end.
View 7 Replies
View Related
Mar 23, 2008
I have a Acer notebook. It had Norton security already installed. I removed this recently and put a AVG anti virus on. This seems to be fine. What I am finding is that when I turn on the computer the Firewall is off. I then reset it to on but again it is off on start up. This did not happen when Norton was installed.
View 7 Replies
View Related
May 4, 2008
Everytime I turn my laptop on or log back into it the windows firewall is turned off... Is there anyway to keep it on so I don't have to manually turn it on all the time?
View 5 Replies
View Related
Mar 10, 2010
I need a firewall & AV protection, I'm kinda settled on getting: COMODO Firewall and AVAST. 'm looking at Comodo Internet Security v3.3 only the firewall part and then the free Avast whic has caught everything for me in the past but on XP; now I'm using vista ultimate 32bit. I wanted to run it by here first to see if anyone has good/bad experience with the two programs running together.
View 8 Replies
View Related
Apr 12, 2008
How is Vista firewall compared to the freebie standards like AVG and Avast? I have Avast running on my Home Premium 32 version, but the built-in one is running too, which can create conflicts.
View 5 Replies
View Related
Apr 11, 2009
Just today got a warning that my Firewall wasn't turned on. Tried to turn it on and it won't respond.
View 5 Replies
View Related
